Scribd
Upload
150 views3 pages

Information Sheet: 1. Clean Dirt and Debris From Tools After Each Use

The document provides instructions for maintaining and storing tools and equipment. It outlines procedures for cleaning hand tools, such as removing dirt and debris after each use, oiling metal parts to prevent rust, and lightly sanding and oiling wooden handles. It also lists steps for cleaning power tools, like following the maintenance schedule, changing oil, cleaning air filters, and lubricating moving parts. Students are assigned a task sheet where they must perform and record the maintenance of tools from their home, either by video or written narration, and submit their work to their instructor.

Uploaded by

myco saura
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
150 views3 pages

Information Sheet: 1. Clean Dirt and Debris From Tools After Each Use

The document provides instructions for maintaining and storing tools and equipment. It outlines procedures for cleaning hand tools, such as removing dirt and debris after each use, oiling metal parts to prevent rust, and lightly sanding and oiling wooden handles. It also lists steps for cleaning power tools, like following the maintenance schedule, changing oil, cleaning air filters, and lubricating moving parts. Students are assigned a task sheet where they must perform and record the maintenance of tools from their home, either by video or written narration, and submit their work to their instructor.

Uploaded by

myco saura
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Information Sheet

Quarter I – Week 7
Subject Area: Specialized Subject 1
Introduction to Electrical Installation and Maintenance

I. Lesson 13. Maintaining and Storing Tools and Equipment

II. Lesson objective:


At the end of this lesson, you will be able to;
1. Identify procedure in storing tools and equipment
2. Enumerate procedure in storing tools and equipment
III. Lesson content:

Maintaining the functionality of our tools is a must to prolonged the life of our electrical
tools and equipment. In this lesson, we will Identify the procedures or tips in cleaning and
maintaining our tools and equipment.

Recommended Cleaning for Hand Tools

1. Clean dirt and debris from tools after each use

2. Oil metal parts to prevent rust

3. Lightly sand rough wooden handles and apply linseed oil

4. Repair loose handles

5. Sharpen blades of cutting tools

6. Store tools in a clean dry storage area

7. Protect surfaces of cutting tools in storage


Recommended Cleaning of Power Tools

1. Follow the maintenance schedule in the owner’s manual

2. Change the oil

3. Clean the air filter

4. Lubricate moving parts

5. Replace worn blades according to the owner’s manual

6. Replace spark plugs

7. Drain oil and gasoline before long-term storage

8. Check electric cords and connections on electric powered tools


Task Sheet 1.1 - Perform Maintenance in Tools
Name: ______________________________ Course/Block: _________________

Materials needed:
1. Tools available in your home
2. Cleaning solvents
3. Rags
4. Washing pan
5. Electric fan
6. Safety
7. Apparel

Procedure:
1. Wear protective clothing such as gloves and masks (if available).
2. Gather the tools to be cleaned in the designated area for cleaning.
3. Classify the tools to be cleaned according to how dirty they are.
4. Measure and pour enough cleaning solvent to the washing Pan.
5. Submerge the tools in the washing pan.
6. Use a paint brush to remove the dirt from the tools.
7. Get the tools from the washing pan and wipe them with rags until dry.
8. Clean and keep all materials used for cleaning.

Submission:
For online learners:
1. With the use of camera (phone), video tape yourself doing the procedures in maintaining
tools at home
2. Save you video and upload it in google classroom.\
3. Turn in and submit your work.
4. Notify your instructor if done.

For modular learners:


1. Do the following procedures.
2. Make a narration on how did you do the maintenance of tools at home
(Example:
1. I prepare the tools and the materials needed for maintaining tools at home
2. I wear protective devices before doing the job…)
3. Write it in a piece of paper and attach/staple it in the handouts
4. Notify your instructor if done.

You might also like