0% found this document useful (0 votes)
114 views3 pages

Cargo Handling Checklist For Modern Chemical Tankers

This document provides a cargo handling checklist for chemical tankers. It lists 10 check items to ensure the safe handling of dangerous liquid chemicals, including confirming necessary safety information is available, protective equipment is ready, emergency response procedures have been agreed upon, cargo handling rates are compatible with safety systems, gauges and alarms are functioning properly, vapour detection instruments are available, firefighting procedures have been exchanged, hoses are suitable for the cargo, permanent pipelines are used when possible, and nitrogen purging procedures have been established, as applicable. The checklist aims to carefully consider hazards at various stages of shipboard chemical cargo operations.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
114 views3 pages

Cargo Handling Checklist For Modern Chemical Tankers

This document provides a cargo handling checklist for chemical tankers. It lists 10 check items to ensure the safe handling of dangerous liquid chemicals, including confirming necessary safety information is available, protective equipment is ready, emergency response procedures have been agreed upon, cargo handling rates are compatible with safety systems, gauges and alarms are functioning properly, vapour detection instruments are available, firefighting procedures have been exchanged, hoses are suitable for the cargo, permanent pipelines are used when possible, and nitrogen purging procedures have been established, as applicable. The checklist aims to carefully consider hazards at various stages of shipboard chemical cargo operations.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Cargo handling checklist for modern chemical tankers 

Handling dangerous liquid chemicals in bulk involved numerous hazards. Careful


considerations are essential during various stages of shipboard operations.
Below check items are described as guidance only.

1. Is information available giving the necessary data for the safe


handling of the cargo and, where applicable, is a manufacturer's
inhibition certificate available?

Information on the product to be handled should be available on board the ship


and ashore before and during the operation. This information should include:

i) a cargo stowage plan;


ii) a full description of the physical and chemical properties, including reactivity,
necessary for the safe containment of the cargo;

iii) action to be taken in the event of spills or leaks;

iv) counter measures in the event of accidental personal contact;

v) fire fighting procedures and fire fighting media;

vi) procedures for cargo transfer, tank cleaning and gas freeing.

When cargoes required to be stabilised or inhibited are to be handled,


information about them should be exchanged between ship and terminal.

2. Is sufficient and suitable protective equipment (including self-


contained breathing apparatus) and protective clothing ready for
immediate use?

Suitable protective equipment (including self-contained breathing apparatus and


protective clothing), appropriate to the specific dangers of the product handled,
should be readily available both on board and ashore in sufficient quantity for
operational personnel.

3. Have counter measures in the event of accidental personal contact


with the cargo been agreed ?

Sufficient and suitable means should be available to neutralise the effects and
remove small quantities of spilled products. However, it is possible that
unforeseen personal contact may occur. To limit the consequences, sufficient
and suitable countermeasures should be taken. Information on how to handle
such contact with regard to the special properties of the products should be
studied and available for immediate use.

A suitable safety shower and eye rinsing equipment should be fitted and ready
for instant use in the immediate vicinity of places on board and ashore where
operations regularly take place. Measures should be taken to ensure that the
equipment is operable in all ambient conditions.

4. Is the cargo handling rate compatible with the automatic shutdown


system, if in use?

Automatic shutdown valves may be fitted on the ship and shore. The action of
such valves is automatically initiated when a certain level is reached in the tank
being loaded either on board or ashore. In cases where such systems are used,
the cargo handling rate should be so adjusted that a pressure surge evolving
from the automatic closure of any such valve does not exceed the safe working
pressure of either the ship or shore pipeline system.

Alternative means, such as a recirculation system and buffer tanks, may be


fitted to relieve the pressure surge created. A written agreement should be
made between the ship and shore supervisors indicating whether the cargo
handling rate will be adjusted or alternative systems will be used.

5. Are cargo system gauges and alarms correctly set and in good order?

Ship and shore cargo system gauges and alarms should be checked regularly to
ensure they are in good working order. In cases where it is possible to set
alarms to different levels, the alarm should be set to the required level.

6. Are portable vapour detection instruments readily available for the


products to be handled?

Equipment provided should be capable of measuring, as appropriate, flammable


and/or toxic levels. Suitable equipment should be available to calibrate those
instruments capable of measuring flammability, and any necessary calibration
should be carried out before the cargo handling operation commences.

7. Has information on firefighting media and procedures been


exchanged?

Information should be exchanged on the availability of fire fighting equipment


and the procedures to be followed in the event of a fire on board or ashore.
Special attention should be given to any products being handled which may be
water-reactive or require specialised fire fighting procedures.

8. Are transfer hoses of a suitable material, resistant to the chemical


action of the cargoes?

Each transfer hose should be indelibly marked to show the products for which it
is suitable, its specified maximum working pressure, the test pressure and the
most recent date of testing at this pressure and, if used at temperatures other
than ambient, its maximum and minimum service temperatures.

9. Is cargo handling being performed with permanent installed


pipelines?

During cargo operations where the use of portable cargo lines on board or
ashore is unavoidable, care should be taken to ensure that these lines are
correctly positioned and assembled so that no additional danger exists from their
use. Where necessary, the electrical continuity of these lines should be checked.
Non-permanent cargo lines should be kept as short as possible. The use of non-
permanent equipment inside tanks is not generally permitted unless the
approval of the port authority has been obtained.

10. Where appropriate, have procedures been agreed for receiving


nitrogen supplied from shore, either for inerting or purging ship's tanks,
or for line clearing into the ship?

Ship and shore should agree in writing on the inert gas supply, specifying the
volume required and the flow rate in cubic metres per minute. The sequence of
operating valves before beginning the operation and after completion should be
agreed, so that the ship remains in control of the flow. Attention should be given
to the adequacy of open vents on a tank in order to avoid the possibility of over-
pressurisation. The tank pressure should be closely monitored throughout the
operation.

The ship's agreement should be sought when the terminal wishes to use
compressed nitrogen or air as a propellant, either for a line scraper to clear
shore lines into the ship or to press cargo out of shore containment. The ship
should be informed of the pressure to be used and the possibility of receiving
gas into the cargo tank.

You might also like