www.queclink.com sales@queclink.
com +86 21 5108 2965
Compact Size
Multipe I/O Interfaces
1-wire Interface
Scheduled Timing Report
Geo-fences
Motion Detection
Driving Behavior Monitoring
Crash Detection
Power Supply Monitoring
GV65 Series Tow Alarm
Fuel Level Monitoring
Compact multi-interface GNSS trackers for a wide range
of vehicle tracking applications Temperature Monitoring
Driver ID Identify
56g (GV65) 73mm(L) × 54mm(W) × 22.7mm(H)
S
62g (GV65 Plus)
Support Virtual Odometer
Operating Voltage: 8V to 32V DC
-30℃ ~ +80℃
Li-Polymer, 250 mAh (GV65 Plus)
The GV65 series includes two compact GNSS trackers designed for a wide variety of vehicle tracking applications. The series
includes multiple digital/analog I/Os that can be used for monitoring or controlling external devices, and has a 1-wire interface
for iButton driver ID or temperature monitoring.
Stolen Vehicle Recovery Transportation Monitoring Fleet Management
International Telematics Solutions Innovator
Queclink Wireless Solutions Co., Ltd.
GV65 Series Models
Position Accuracy Backup
Region Operating Band GNSS Type Certificate
(CEP) Battery
GSM u-blox All-in-One
GV65 Worldwide Autonomous: < 2.5m N/A CE/E-Mark
850/900/1800/1900 MHz GNSS receiver
GSM u-blox All-in-One Li-Polimer,
GV65 Plus Worldwide Autonomous: < 2.5m CE
850/900/1800/1900 MHz GNSS receiver 250 mAh
Interfaces
GNSS Connector
10 PIN Interface
CEL LED
GPS LED
Power LED
1 positive trigger input for ignition detection
Digital Inputs
2 negative trigger inputs for normal use
Digital Output 1 digital output, open drain, 150 mA max drive current
Latched Digital Output 1 digital output with internal latch circuit, open drain, 150 mA max drive current
Analog Input 1 analogue input with selectable input voltage range (0V-12V or 0V-30V)
1-wire Interface Support 1-wire temperature sensor and iButton driver ID
GSM Antenna Internal only
GNSS Antenna Internal antenna and optional external antenna
LED Indicators CEL, GNSS, PWR
Mini USB Interface Used for upgrading and debugging
www.queclink.com sales@queclink.com +86 21 5108 2965
Queclink Wireless Solutions Co., Ltd.
Accessories
1-wire Temperature Sensor
1-wire temperature sensor (DS18B20)
Cable length: 8m
CAN100_INV with Cable
Decodes information from vehicles digital buses CAN
bus and J1708) for tracking device
Power supply voltage: 7V to 36V
Current consumption (operating mode @12V,)6,5 mA
Current consumption (operating mode @24V,)4 mA
Current consumption (sleep mode)below 1 mA
Output current (outputs OUT1, OUT2, OUT3)50 mA
Operating temperature -40℃ ~+80℃
serial port UART compatible
Include UART cable
iButton Kit without AC100
Used for driver ID identification (Dallas keys) Parts list:
iButton reader x 1pc; 1-wire interface
iButton (with handle) x 2pcs Cable length: AC100 1M;
iButton reader 18cm
Active_Buzzer_1M
Active buzzer with 1m cable
Can be drived by the digital output on any GV Series devices
Film_Panic_Button_2M
Film panic button with 2M cable
Relay with Socket
Relay with socket for GV Series
Cable length: 14.5cm
NO/NC 40A/30A (14V DC)
With internal freewheeling diode
Antenna_GPS_SMA_3M
GPS active antenna with SMA type RF conntector
Cable length: 3m
EIO100
Expander for input and output can connect with tracking device through
UART or 1-Wire
Digital input x4 Digital output x4
Cable Length: 1.2m
Power Protection Cable
Power protection TVS cable
Used to improve the anti surge capacity of GV series
Features:
Reverse stand-off voltage: 30V
5000W x 2 peak pulse power capability on 10/1000us waveform
www.queclink.com sales@queclink.com +86 21 5108 2965
