Technical Datasheet

FLEXIBLE PU SEALANT
One-component moisture curing polyurethane sealant.

Description Sealant application

Multi-purpose, single component, polyurethane elastic Cut the nozzle slantwise to form an opening
sealant and adhesive, solvent free with excellent
proportional to the joint width, put the
resistance to moisture. Appropriate for sealing vertical
and horizontal joints with 10-25 mm width for interior cartridge/sausage into the hand- or air gun and apply
and exterior applications. After application, in contact the sealant in the joint. Then smoothen the surface of
with air, the sealant is vulcanized to an elastic and the uncured sealant with a spatula, to form a slightly
cohesive mass. negative crescent.
For improved performance it is essential that the
Physical properties sealant be only bonded to the two facing sides of the
joint. To achieve this install a backup material (closed
• Elastic performance and movement capability. cell polyethylene or open cell polyurethane foam). Apply
• Adhering ability to dissimilar substrates. the sealant in a continuous operation making sure all air
• Easy application at temperatures from +5οC to pockets or voids are eliminated. Tool the sealant with
+40οC. light pressure to spread the material against the joint
• Very good resistance to aging (UV and moisture). surfaces. This operation should be made with a dry
• High mechanical strength. spatula before skin formation occurs.
• Service temperature: -40 οC to +90 οC. Excess uncured sealant should be wiped and cleaned
• Paintable. with a commercial solvent such as xylene or white spirit.
• Resistant to diluted acids, common chemicals, Cured sealant can only be removed by abrasion.
detergents petrochemicals and mineral oils.
Technical properties
Application fields
a. Unvulcanized Rubber:
Features excellent adhesion indoors and outdoors to all
• Consistency: non-sag
building materials, including concrete, plaster, natural or
• Skin forming time: 120-240 min (23 oC, 50% RH)
synthetic stones, metals, aluminium, wood, ceramic tile,
• Curing speed: 2-3 mm/1 st day (23 oC, 50% RH)
plastic etc. Ideal for sealing, restoration, repairs and
• Specific Gravity: 1.25
welding on window sills, stairs, balconies, joints around
b. Vulcanized Rubber:
windows and doors, facades, metal panels, concrete
• SHORE A - Hardness: 30±5
joints and many more.
• Movement capability: 25%
• Ability to return: 90%
Application instructions • Tensile strength (ISO 8339): 0,82 N/mm2
• Modulus at 100% elongation (ISO 8339): 0,41 N/mm2
Joint preparation: The joint faces to be bonded must be • Elongation at break (ISO 8339): 450 %
clean, dry and free from dust, oil, grease, old sealant
and any traces of contaminant, which may affect Packaging
adhesion. Surfaces should be degreased with solvent
using a clean cloth. To remove dust, use oil-free In paper carton with 25 aluminum cartridges of 310ml or
compressed air. 15 aluminum sausages 0.6 Lt.
Joint dimensions: The movement capability of sealant
as well as local regulations must be considered. Joint Shelf life
width should be twice the depth when the width is
bigger than 20mm and equal to the depth when the 12 months minimum when stored in places with normal
width is smaller than 20mm. The width of the joints temperature and humidity.
should not be less than 5 and bigger than 40mm.

Notes

TDS BAUER- FLEXIBLE PU SEALANT -EN- 11.04.2017
Technical details, properties, recommendations and
information on BAUER products are supplied in good faith.
They are based on the company's research and experience,
provided that they are stored and applied under normal
conditions. As the method of using materials as well as project
and environment conditions are beyond the control of the
company in each individual application setting, the product
user is held solely responsible for the result of application. No
responsibility under any legitimate relationship can be
substantiated against the company, based on the information
set out hereunder. Product users are advised to refer to the
latest revision of the technical manuals available.

Other information

BAUER BUILDING TECHNOLOGIES

Frankfurt, Reg. No 312310 QM

TDS BAUER- FLEXIBLE PU SEALANT -EN- 11.04.2017