Scribd
Upload
93 views5 pages

Novasonic U5700 Automatic Cross Hole 4Ch. Ultrasonic 25/50Khz

The U5700 is a multi-channel ultrasonic device designed for testing pile foundations using cross-hole acoustic wave transmission. It can test 3 or 6 profiles per lift at speeds over 60 meters per minute. The device has 4 channels that can test piles automatically and displays test results on a 10.4 inch touch screen. It stores data on an internal micro SD card and has a 6 hour battery life powered by an internal lithium battery. Standard accessories include probes, guide wires, software, and carrying cases.

Uploaded by

Walid Kafi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
93 views5 pages

Novasonic U5700 Automatic Cross Hole 4Ch. Ultrasonic 25/50Khz

The U5700 is a multi-channel ultrasonic device designed for testing pile foundations using cross-hole acoustic wave transmission. It can test 3 or 6 profiles per lift at speeds over 60 meters per minute. The device has 4 channels that can test piles automatically and displays test results on a 10.4 inch touch screen. It stores data on an internal micro SD card and has a 6 hour battery life powered by an internal lithium battery. Standard accessories include probes, guide wires, software, and carrying cases.

Uploaded by

Walid Kafi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

TESTING - CONSULTING - TRAINING

NOVASONIC U5700
Automatic Cross Hole 4ch.; Ultrasonic 25/50KHz

Field of use
U5700, multi-channel ultrasonic detector, is the perfect device for
Cross-Hole acoustic wave transmission method. This instrument
is specifically designed for testing piles foundation integrity by
using the acoustic wave transmission method integrated with the
unique multi-channel self- emission / self-receiving function. It
also enables the concrete pile all-profile test with only one lift (3 o
4 acoustic testing pipes embedded), which makes the detection
process more efficient and simpler.

Features:
• Testing 3 or 6 profiles per lift. The lifting speed > 60 meters per min (5 points per meter);
• Gains and delays are adjustable for evry channel at any time, it ensures the data accuracy and reliability;
• Display all 6 profile information on one screen, thus making the quality of the entire rebar pile clear;
• 4 radical transducer part with different colors, makes simple operation convenient and efficient;
• During testing, you can adjust internal test point at any time and do “encryption” test point for important key
parts;
• Can switch viewing bar graph, wave train graph, Depth curve, and record user’s use habits;
• Horizontal test, inclined test, retest, and finer increment testing multi modes, allow you to have an accurate
identification of pile shaft defects;
• Built-in mass SSD (solid state disk) and mass lithium battery are perfect for field work;
• Data transfer trough U disk. Fast and convenient;
• Built-in GPS orientation module, can get the GPS information of every foundation pile and save to data files
of detection;
• Built-in WIFI module, LAN access through wireless routing, it make data transmission more conveniently
and quickly.

TECHNICAL FEATURES:

• Model: U5700;
• Control mode: Low power consumption. Quad-core processors;
• Function: measure concrete resistance 25/50KHz, Localization and
mapping of defects inside the concrete component, Measuring
the crack depth, Cross-Hole 4ch aut.;
• Monitor (HD high brightness TFT LCD screen): 10.4 inch;

Novatest S.r.l.

www.novatest.it [email protected]
• Data Storage: Internal Micro SD (TF). Standard 8GB and can expandable U
Disk;
• Operation Mode: Touch screen;
• Signal collecting Mode (sampling point bu point): 4 channels auto;
• Channels: 4 independent;
• Trigger: signal;
• Sampling interval: 0.025 s ~ 204.8 s, 14 adjustable;
• Acoustic transit time accuracy: 0.025 s;
• Measuring range: 0 ~ 4 s;
• Amplifier gain: 100 dB;
• Amplifier bandwidth: 10 ~ 250 KHz;
• Receiver sensitivity: 30 V;
• Amplifier gain accuracy: 0.025 %;
• Emission voltage (V): 65, 250, 500, 1000 V adjustable;
• Emission pulse-width: 2 s ~ 20 ms adjustable;
• Ports: USB;
• Power:
- I. Internal: Built-in lithium battery 6 hrs;
- II. External port: 9V DC;
- III. Alternating Current Power: 220V, 50 Hz;
• Size (mm): 271x220x70;
• Weight: 2.5 Kg (lithium battery included);
•Operational environment:
- Temperature: 0 °C ~ + 40°C ;

STANDARD ACCESSORIES:

• No.1 Acquisition unit U5700 tablet rugged IP67 multichannel;


• No.1 Automatic wireless encoder (possible use with wire);
• No.4 probes, length 100m;
• No.4 Guide Wire;
• USB pen drive and software for data processing;
• Battery charger;
• No.1 Tripod;
• Two suitcases for transport
• Manual
• No.1 Measuring tape 5m;
• No.1 Compass;
• No.2 Carrying case.
Optional case:
• No.2 UT probes 50KHz, L=10m;
• No.2 UT probes 25KHz, L=10m.

Novatest S.r.l.

www.novatest.it [email protected]
SCREEN-SHOT INSTRUMENT U5700

A) Cross-Hole data Acquisition interface No. 4 Channels/No.


6 Profile

B) Example of Cross-Hole data acquisition a foundation piles. Speed Chart.

Novatest S.r.l.

www.novatest.it [email protected]
C) Sonic Regressive

C) Detecting defect of Concrete

Novatest S.r.l.

www.novatest.it [email protected]
TESTING - CONSULTING - TRAINING

D) Ultrasonic Software Interface

E) Example of Ultrasonic Curve acquisition

Novatest S.r.l.

www.novatest.it [email protected]

You might also like