JSW MARKET SURVEY REPORT

JINDAL STEELS
MARKET SURVEY REPORT

JINDAL SOUTH WEST STEEL LTD. 1

 JSW MARKET SURVEY REPORT

TABLE OF CONTENTS

1. Types of steel product……………………………………………………………………….3

1.1. Hot rolled (HR)................................................................................................3
1.2. Cold rolled (CR)..............................................................................................3
1.3. Galvanized (GI)...............................................................................................4
1.4. Color coated products.....................................................................................4
1.5. Electrical steel.................................................................................................5
1.6. Tin plate..........................................................................................................6
1.7. Tmt bars..........................................................................................................6
1.8. Special alloy steel...........................................................................................7
1.9. Wire rods.........................................................................................................7
2. Steel section…………...................................................................................................8
2.1. I section beam.................................................................................................8
2.2. I section column..............................................................................................8
2.3. Mild steel equal angles...................................................................................9
2.4. Mild steel channels.........................................................................................9
2.5. Round bars...................................................................................................10
3. Treatments..................................................................................................................11
3.1. Uses..............................................................................................................11
3.2. Methods.........................................................................................................11
3.2.1. Barrier protection.............................................................................12
3.2.2. Cathodic protection.........................................................................12
3.2.3. Pre coated metal (PCM)..................................................................13
3.2.4. Vinyl coated metal (VCM)................................................................13
3.2.5. Galvanized steel..............................................................................13
3.2.6. Galvalume steel/ Al-Zn coated steel...............................................14
3.2.7. Galvanneal......................................................................................14
3.2.8. Galfan..............................................................................................14
3.2.9. ZAM.................................................................................................14
3.2.10. JSW Radiance…………………………………………………….…..15
3.3. Available paint types………………………………………………………..……16
3.3.1. Regular modified polyester……………………………………………16
3.3.2. Silicone modified polyester- SMP……………………………….……16
3.3.3. Super durable polyester- SDP……………………………………..…16
3.3.4. Polyvinylidene fluoride- PVDF……………………………………..…16
4. Bolted junctions………………………………………………………………………...…...17
5. Riveted junctions……………………………………………………………………...…….18
6. Finishing material applied to bolts and rivets……………………………….……………20
7. Welded junctions…………………………………………………………………...……….20
8. Transportation…………………………………………………………………...………….22
9. Live case study……………………………………………………………………………...23
10. Analysis………………………..…………………………………………………………...23

JINDAL SOUTH WEST STEEL LTD. 2

 JSW MARKET SURVEY REPORT

1. TYPES OF STEEL PRODUCTS AVAILABLE :

1.1. HOT ROLLED (HR) -

● HR coils follow all standards ranging from mild

steel, and include ultra-low carbon grades to
high-strength advanced grades.
● The widest range of HR products has-
Thickness - 25.4 mm,
Width - 2,050 mm and
Coil weight - 36 tonnes.

APPLICATION -
➢ Drawing and press forming for automobile and other applications.
➢ Electrical stampings and forming.
➢ Checkered sheets and plates for structural use.
➢ LPG cylinders, boiler tubes and pressure vessels.
➢ Corrosion-resistant applications.

PRICE -
Rs 49/Kilograms

1.2. COLD ROLLED (CR) -

● CR coils follow a wide range of standards with superior

formability, surface quality and dimensional controls.
● Available in high-strength and advanced high-strength
steel grades.
DIMENSION
Ranges from 1-2mm in thickness.

APPLICATION -
➢ Automobile,
➢ White goods,
➢ Cold-formed sections,
➢ Drums and barrels,
➢ Furniture,
➢ General engineering

PRICE -
Rs 49.7/Kilogram

JINDAL SOUTH WEST STEEL LTD. 3

 JSW MARKET SURVEY REPORT

1.3. GALVANIZED (GI)-

● Manufactured in commercial, forming, drawing and

structural grades.
● Superior coating characteristics, precise coating,
weight control , and adhesion improves the product’s life.
● Superior weldability, paintability and formability to meet
the exact automotive requirements.
● GA(Galvannealed) with JAZ (zinc)coating for improved
frictional characteristics contributing to superior
formability.
DIMENSION-
Galvanized roofing sheet available in 12x4 feet dimension
Thickness- 0.5mm

APPLICATION-
➢ Roofing and cladding,
➢ Coolers,
➢ Furniture,
➢ Solar heating panels,
➢ Electrical and light fittings,
➢ Agricultural equipment,

PRICE -
Galvanized corrugated sheet - Rs 110/kg, Galvalume sheet - Rs 75/kg

1.4. COLOR-COATED PRODUCTS-

● JSW Steel color-coated products combine steel's

strength
with paint's aesthetics and improves corrosion
resistance.
● A wide range of thicknesses, width, colors and profiles
with
uniform color, gloss, texture and film thickness.
● Superior coating technology designed to resist cracking
and
● peeling, even during heavy forming operations.
● DIMENSION
8 X 4 Feet in length
Thickness-2 to 3 mm. Use

JINDAL SOUTH WEST STEEL LTD. 4

 JSW MARKET SURVEY REPORT

APPLICATION-

➢ White goods - for panels that have high aesthetic requirements and construction
➢ Various kinds of profiles, geometry industrial roofing and PEB segments

PRICE -
Rs 80/kg

1.5. ELECTRICAL STEEL

● Offers high-quality, non-oriented electrical steel, which
stands for higher energy efficiency.
● A range of grades are manufactured meeting all standards
and the specific requirements of each application.
● A wide range of coatings is available, allowing further
enhancement and improvement of corrosion protection.
DIMENSIONS-
Thickness - 0.65 mm
Width- 1200 mm

APPLICATION-
➢ Electric motors,
➢ alternators,
➢ power generator,
➢ nuclear power stations,
➢ appliances,
➢ transformers,
➢ automotive electricals.

PRICE -
Rs 75/kg

JINDAL SOUTH WEST STEEL LTD. 5

 JSW MARKET SURVEY REPORT

1.6. TIN PLATE

● JSW Platina a thin steel sheet with a coating of tin

exhibiting high strength and formability.
● Corrosion resistant by tin coating.
● The smooth surface finish aids printability and gives
aesthetic appeal.
● Tin plate provides superior protection against dust
and moisture and is an environment -friendly.

APPLICATION-
➢ Packaging applications such as cans,
➢ containers of food grade oils,
➢ processed food,
➢ aerosol and paint cans,
➢ battery casings

PRICE -
Rs 75/kg

1.7. TMT BARS

● Manufactured through steelmaking technologies which

then results in uniform chemical composition and physical
properties, enhancing strength, ductility and elongation.
● This product also exhibits good weldability, superior corrosion resistance and
fatigue strength.
● It bonds perfectly with cement.
DIMENSIONS-
Size-10-20 mm
Diameter- 12-32 mm

APPLICATION-
➢ Construction, infrastructure

PRICE -
Rs 46,000/metric ton

JINDAL SOUTH WEST STEEL LTD. 6

 JSW MARKET SURVEY REPORT

1.8. SPECIAL ALLOY STEEL

● Available in the form of bloom and bars.

● Meets the customized requirements and are produced
in different grades.
● Products are available in various profiles – round bars,
round cornered squares in straight bars, round and
hexagonal wire rods as coils, hexagonal and flat sections,
straight bars as well as bright bars.

APPLICATION-
➢ Automotive suspension parts,
➢ gears and transmission,
➢ engine components,
➢ fasteners,
➢ bearings,
➢ shafts,
➢ power plants

PRICE -
Rs 200/kg

1.9. WIRE RODS

● It has a wide product range having low, medium and

high carbon grade, electrode grade and alloy and special
grade wire rods.
● Exhibit excellent mechanical and consistent chemical properties.
● Dimensional accuracy guaranteed by an automated thickness control system.
DIMENSIONS-
Inner Diameter- 750 mm min.
Outer Diameter-1250 mm max.
Coil Height-2 meter max.

APPLICATION-
➢ Automobile,
➢ general engineering,
➢ spring applications,
➢ wire ropes,
➢ bearings, office
➢ household equipment

JINDAL SOUTH WEST STEEL LTD. 7

 JSW MARKET SURVEY REPORT

1. STEEL SECTIONS :

2.1. I SECTION BEAM

APPLICATION-

● used to construct frames for trolley ways,

● elevators,
and even truck beds.

ADVANTAGES-

● low cost,
● high precision,
● low residual stress,
● saves about 30% of the
manufacturing cost of steel structure

2.2. I SECTION COLUMN

APPLICATION-
These are widely used in-

● Building and other structural support

● Bridges
● Support trusses
● Main framework in buildings.

ADVANTAGES-

● low cost,
● high precision,
● low residual stress,
● no expensive welding materials
● saves about 30% of the manufacturing cost of steel
structure

JINDAL SOUTH WEST STEEL LTD. 8

 JSW MARKET SURVEY REPORT

2.3. MILD STEEL EQUAL ANGLES

APPLICATION-

Angles are used in various industrial applications

like-
● Transmission towers and lines
● Building, and other structural support
● Precipitators WindMill Towers

ADVANTAGES-

● Wide dimensional range

● Excellent surface finish
● Formable and machinable
● Superior weldability
● Higher mechanical and chemical property

2.4. MILD STEEL CHANNELS

APPLICATIONS -

● Truck & trailer frame support

● Bridges,Poles, Freight cars
● Equipment & machinery frames & supports
● Building frames & other support components.

ADVANTAGES -

● Mild to High tensile strength

● Superior weldability
● Atmospheric corrosion resistance
● Wide dimensional range

JINDAL SOUTH WEST STEEL LTD. 9

JSW MARKET SURVEY REPORT

2.5. ROUND BARS

APPLICATION-

● round bar include supports,

● shaft,
● braces,
● pins, and dowels.

ADVANTAGES-

1. High strength
2. Comes in different shapes
3. Malleable
4. Excellent surface finish

JINDAL SOUTH WEST STEEL LTD. 10

 JSW MARKET SURVEY REPORT

3. TREATMENTS :
Sheet steel is coated with metallic and non-metallic coatings to provide barrier
protection against corrosion, extend product lifetime, and improve appearance. Coating
materials include paint, zinc, calmium, aluminum, chrome, nickel, nickel-chromium, iron
oxide, and silver.

3.1. USES :
● corrosion prevention
● Fire resistant
● increase a material's wear resistance and
aesthetic appeal

3.2. METHODS :
A. Corrosion:
1. Application of zinc coating – steel galvanization
it’s a process which creates a coating of zinc over
a metal surface.
2. Application of paint coating – painting creates a coating barrier to moisture
(which also beautifies metal structures).
Both methods are intended to provide unfailing functioning of steel structure (for a
specified period of time). The better the durability of the coating, the higher the price of
protection.

B. Fire:
1. Intumescent Coatings
Aka intumescent paints
The coatings will undergo a chemical reaction and expand when exposed to extreme
heat.
commonly used in steel exposed to the general public.
2. Rigid Board Fireproofing can be installed quickly and easily.
provides the right fireproofing requirements as well as thermal and acoustic control. can
be mechanically fastened and can prevent pests and termite attacks.

JINDAL SOUTH WEST STEEL LTD. 11

 JSW MARKET SURVEY REPORT

When left unprotected, steel will corrode in almost any environment.Alloy coatings stop
corrosion by providing two protections - a physical barrier and cathodic action.

3.2.1. BARRIER PROTECTION :

● Alloy coatings provide a continuous, impervious metallic barrier that does not
allow moisture to contact steel.
● Without direct moisture contact, there is no corrosion.
● However, since zinc gradually erodes due to its much slower degradation in the
presence of water and atmospheric pollutants in open air applications, barrier life
is proportional to coating thickness.
● This subject has been researched for many years and the literature is well
supplied with reports on zinc's performance in different climates, with different
alloy additions to the coating and at different coating thicknesses.
● Within the interior of a structure (wall framing and roof trusses) corrosion is not a
consideration provided the exterior membrane maintains its integrity.
● Barrier coating longevity can be improved a number of ways other than by just
increasing coating thickness

3.2.2. CATHODIC PROTECTION :

● Another outstanding protection mechanism is the remarkable ability to

galvanically protect steel.
● When bare steel is exposed to moisture, such as at a cut edge or surface
scratch, steel is protected by the sacrificial loss of zinc in the vicinity of the
exposed steel.
● In the immediate presence of zinc, steel will not corrode until all the zinc has
been sacrificed.
● This is particularly important for coated steel sheets since corrosion will
continually undercut both aluminum or paint barrier coatings.
● The presence of zinc is the key to cathodic protection.

JSW Steel Coated Products Ltd. is India’s largest manufacturer and

exporter of Coated Steel as well as Color Coated Steel.
● Galvanized and Galvalume (Aluminum and Zinc coated) steels are an ideal
material for a multitude of building applications.
● In the residential construction market, coated steel has particular and
cost-effective applications in framing , roofing , rain ware (gutters and
downspouts) , ductwork (heating/cooling and venting) and household
appliances.

JINDAL SOUTH WEST STEEL LTD. 12

 JSW MARKET SURVEY REPORT

3.2.3. PRE COATED METAL (PCM)

● A cleaned, pre-treated Galvanized or

Galvalume steel sheet in coil form is applied
with various layers of organic coatings such
as paints, vinyl dispersions or laminates.
● These coatings are applied in a continuous
process known as Coil Coating.
● The steel thus produced is a prepainted,
prefinished ready-to-use material.
● PPGI is the material which uses Galvanized
& Galvalume steel as the basic substrate
metal.
● It can be used both in home appliances and
construction.

3.2.4. VINYL COATED METAL (VCM)

● Essentially, the metal is coated with a vinyl

film that has unique patterns and colours
● Natural textures of wood, marble and zinc
can be easily reproduced to add character
to construction and home appliances.

3.2.5. Galvanized Steel

● A zinc coating, usually hot-dipped, in which the
zinc and steel form a metallurgical bond.
● The thickness of a hot-dipped coating can be
varied from a thin zinc/iron alloy layer to heavy
applications suitable for extended outdoor
exposure.
● Electrogalvanized also a zinc coating, but
applied
in a cold, electrolytic bath rather than a molten
zinc bath.
● Traditionally the coatings are thinner than hot-dipped and not suitable for
extended outdoor exposure.
● A proprietary zinc alloy coating (5% aluminum) with improved corrosion
resistance and formability compared to zinc alone.

JINDAL SOUTH WEST STEEL LTD. 13

 JSW MARKET SURVEY REPORT

3.2.6. Galvalume Steel / Al-Zn coated steel

● A proprietary zinc alloy coating (55% aluminum)
with superior corrosion resistance.
● This product is suited for most types of roofing
and siding applications as well as unexposed
automotive
parts, appliances and miscellaneous
applications like furniture, outdoor cabinetry,
computer cases, gutters, pipe, etc.
● The product is a 55% aluminum-45% zinc alloy
coated steel sheet.

3.2.7. Galvanneal
● A zinc-iron coating produced bypost-heating a
hot- dipped coating. It is often used where paint is
to be applied to the coated sheet.
● The galvanization is made through the
hot-dipping (Hot-dip galvanizing) process and an
immediate in-line
annealing and gives a very fine grayish matte
finish.
● Galvanneal does not flake off its galvanized coating when formed, stamped, and
bent.
● The very fine matte finish acts like a primer, allowing paint to adhere easily, and
is very rust proof.
● Galvanneal has better weldability.

3.2.8. Galfan
● A proprietary zinc alloy coating (5% aluminum)
with improved corrosion resistance and
formability compared to zinc alone.

3.2.9. ZAM
● ZAM is a hot-dip Zinc-Aluminum-Magnesium
alloy coated
steel sheet that due to the effects of magnesium
and aluminum,
corrosion resistance, scratch resistance.
● It has harder coating layer than hot dip galvanized and is usually
used as a substitute for hot dip galvanized.

JINDAL SOUTH WEST STEEL LTD. 14

 JSW MARKET SURVEY REPORT

3.2.10. JSW Radiance

● JSW Radiance is a superior Color

Coated Steel product
with newly evolved paint technology to
enhance the life of
the products.
● JSW Radiance contains quality paint
with agents to restore
radiance and luminosity to the surface.
● Designed for color coated coils of all
shades that offer long lasting protective
treatment to fight fading and increase shine.
● JSW Radiance also comes in 6 variants –
- to meet the specific end use requirements of applications across various
industries.
- For assuring the performance of paint technology

Advantage JSW Radiance

● Minimum warranty of 10 Years and upto 25 Years*

● Maximum Thickness and Color Coated Steel in India upto
1.5 mm
● Customized colors with 35 µm paint thickness
● Natural paint agents to restore brightness and
luminosity to the surface
● Widest width in country i.e. 1550 mm Innovative and
unique paint system

Applications :-

● Appliance industry
● Warehousing and PEB application
(Pre-Engineered Buildings)
● Cool room applications

JINDAL SOUTH WEST STEEL LTD. 15

JSW MARKET SURVEY REPORT

3.3. AVAILABLE PAINT TYPES

3.3.1. Regular Modified Polyester - RMP

● Colour Coated Steel that is painted and

dried with polyester
● Excellent workability, weather resistance
and durability
● Wide range of colours and brightness that
make it suitable for various applications
like interior and exterior construction
materials, assembling metals, and
partitions
● Applications:
1. Lightweight partition & Steel furniture
2. Roofing and Siding & Sandwich panel

3.3.2. Silicone Modified Polyester - SMP

● Steel painted with silicon resin and dried

● Superior weather resistance
● Offers better protection than polyester steel sheets used in construction materials
● Application: 1. Sandwich panel 2. Roofing

3.3.3. Super Durable Polyester – SDP

● Pre-finished steel suitable for use in construction material

● High workability, brightness, clearness and printing feature makes SDP perfect
for construction and metal devices that require such qualities
● Applications:
1. Exterior metal devices
2. Roofing

3.3.4. Polyvinylidene Fluoride - PVDF

● Steel sheets applied and hardened with a paint of fluorine resin which has a
symmetric structure and contains fluorine, an inert gas.
● Very high weather and chemical resistance due to an excellent molecular binding
force of the fluorine resin.
● Application:
1. Metal Exterior & Sandwich Panels
2. Structure in Industrial Complexes

JINDAL SOUTH WEST STEEL LTD. 16

 JSW MARKET SURVEY REPORT

4. BOLTED JUNCTIONS
● A bolt is a type of threaded fastener.
● It is generally made of metal.
● Bolted steel connection is one of the most common
elements in steel structure.
● It consists of a bolt that is secured with the
mating of screw threads on the other end.

APPLICATIONS OF BOLT
● When the parts that are fastened, require
frequent dismantling and reassembly.
● When the parts that are fastened, are made
of material which is too weak to make durable
threads.
● When the parts that are fastened have medium
● thickness. For example, beams, flanges or plates
etc.

INSTALLATION
The bolt is placed through a pre-cut hole in the objects,
after which a nut is twisted and secured onto the mating
thread at the end of the bolt. The combination of the bolt
and the nut is known as a bolted joint.

ADVANTAGES OF BOLTED JOINTS

➢ Bolted joints offer several advantages, one of which is high tensile strength. Of course,
tensile strength reflects the maximum amount of stress or tension the bolted joint can sustain
at any given time without breaking.
➢ Bolted joints have a naturally high tensile strength. Furthermore, the tensile strength of a
bolted joint can oftentimes be increased by changing the fasteners or clamp load.
➢ Another reason why bolted joints are so popular is because they are simple and easy to
create. It typically takes less than a minute to slide a bolt through two or more objects and
cap it off with a nut. And even if you’re unfamiliar with bolted joints, you shouldn’t have
trouble creating one.

JINDAL SOUTH WEST STEEL LTD. 17

 JSW MARKET SURVEY REPORT

DISADVANTAGES OF BOLTED JOINTS

➢ Overloading, for instance, may cause a bolted joint to fail prematurely. If the operating force
exceeds the bolted joint’s clamp load, it will fail.
➢ Bolted joints can also fail from corrosion. if the nut or bolt begins to corrode, the nut may
loosen to the point where it’s no longer able to support the operating force.

JSW BOLTS AVAILABLE IN MARKET

JSW Bhushan Roofing Bolt-

Price Range in Size 25 Mm: Rs 2 Per Piece
Price Range in Size 35 Mm: Rs 2.45 Per Piece
Price Range in Size 45 Mm: Rs 3 Per Piece
Price Range in Size 55 Mm: Rs 3.25 Per Piece

Black JSW Flange Bolt /Collar Bolt-

All Sizes are available 5mm-16mm: ₹ 70/ Bag

5. RIVETED JUNCTIONS

● A rivet has a cylindrical shank with a head at one end.

● It is used to make permanent joints between two plates.

APPLICATIONS OF RIVETED JOINTS:

● It is used where we have to avoid after thermal effects,
as in the case of welding.
● Used for metals which have poor weldability
● Used for heterogeneous materials like asbestos friction
lining and steel

INSTALLATION
Rivet is inserted into the holes of plates (which are to be joined)
and then its protruding part is upset by a hammer.

JINDAL SOUTH WEST STEEL LTD. 18

JSW MARKET SURVEY REPORT

ADVANTAGES OF RIVETING
● Relatively inexpensive method. The production of the rivet is cheap.
● Rivet can be used in joining ferrous as well as a nonferrous metal like aluminium
and copper alloys.
● Rivet can be used in joining of nonmetallic material like wood, plastic, asbestos
sheet etc.
● Ability to make joints regardless of the location. (Vertical, overhead, etc.)
● Riveted joints are more reliable than other methods in applications where the
joint is subjected to excessive vibration and impact forces.
● High shear strength, good fatigue resistance.

DISADVANTAGES
● Riveting takes more labor time than welding. Additional operations like lay out
and drilling holes are necessary. The labor cost of rivet joints is high.
● Stress concentration at the rivet holes of metal plates.
● The holes may weaken the working cross section of the plate. Then the
additional thickness is required to compensate for this problem. This additional
thickness and overlapping of plates for riveting increases metal consumption.
● It has more weight than a welded joint due to strap-plate and rivets.
● They typically do not make a tight or leak-proof joint unless using hot rivet or
sealant along the rivet.
● The riveting process is noisier than welding due to hammer blowing.

JINDAL SOUTH WEST STEEL LTD. 19

 JSW MARKET SURVEY REPORT

6. FINISHING MATERIAL APPLIED TO BOLTS AND RIVETS

Zinc: Its coating acts as a sacrificial anode,

protecting the underlying metal.
It is applied as fine white dust.

Black oxide: Its coating is mostly used for

aesthetic purpose. It does not enlarge the
dimensions of the bolt. It is a processed black rust.

Chrome: Its coating gives a bright, reflective

finish. It is decorative and very durable.

7. WELDED JUNCTIONS
● Welding is a process whereby two or more parts are fused together.
● They are fused by means of heat, pressure or both forming a joint as the parts cool.
● Usually used on metals and thermoplastics but can also be used on wood.
● The completed welded joint may be referred to as a weldment.

JINDAL SOUTH WEST STEEL LTD. 20

 JSW MARKET SURVEY REPORT

APPLICATIONS OF WELDED
JOINTS:

● Commonly used across a range of

industries including aerospace,
automotive, energy and construction
amongst others.
● Used to join metals, thermoplastics or
wood for a variety of applications.
● Used for homogeneous materials.

PROCESS

Welding is a high heat process which melts

the base material. Typically with the addition of
a filler material.Heat at a high temperature
causes a weld pool of molten material which
cools to form the join, which can be stronger
than the parent metal. Pressure can also be
used to produce a weld, either alongside the
heat or by itself.It can also use a shielding gas
to protect the melted and filler metals from
becoming contaminated or oxidized.

ADVANTAGES OF WELDING
➢ No change in cross sectional area
➢ High load carrying capacity
➢ Various shapes can be joined
➢ More economical as less material is required.
➢ The efficiency of the welded joint is more than that of the riveted joint.
➢ The welded joints look better than the bulky riveted/butted joints.
➢ Complete rigid joints can be provided with a welding process.
➢ The alternation and addition to the existing structure is easy.
➢ No noise is produced during the welding process as in the case of riveting.
➢ The welding process requires less work space in comparison to riveting

JINDAL SOUTH WEST STEEL LTD. 21

JSW MARKET SURVEY REPORT

DISADVANTAGES OF WELDING

➢ No change in cross sectional area

➢ Welded joints are more brittle and therefore their fatigue strength is less
➢ Due to uneven heating & cooling of the members during the welding, the members may
distort resulting in additional stresses and changes the metallurgical properties.
➢ Skilled labor and electricity are required for welding.
➢ No provision for expansion and contraction is kept in welded connection & therefore,
there is possibility of racks.
➢ The inspection of welding work is more difficult and costlier than the riveting work.
➢ Defects like internal air pocket, slag inclusion and incomplete penetration are difficult to
detect.

8. TRANSPORTATION

● Steel bars are transported bundles, which are

wrapped with fastening belts every 2 to 3 meters.
● Steel coils are least subject to mechanical
influences, deformations, dents and scratches.
● Lightweight packaging is used to transport the
metal rolls for short distances.
● Coils are covered with cardboard or polymer film
to protect against rain and attached around the
perimeter with metal bands. If the international
transportation of steel coils takes more than 24
hours, more reliable packaging is required.
● Packing material in several layers covers not only
the outer but also the inner cylinder of the steel
roll, with special protection installed on both
ends.
● During sheet metal transportation, the bundles are tightly tied with fastening
straps and fixed on the vehicle.

JINDAL SOUTH WEST STEEL LTD. 22

 JSW MARKET SURVEY REPORT

● Bottom and top packs are covered with sheets of cardboard or polymer
film, which protect against precipitation, temperature, and humidity
fluctuations.
● Coil trailers are used for sheet metal transportation, the transportation of
steel coils, sheets, rolled tin, non-ferrous alloys, metals bound in bundles,
and pipes from 7 to 21 m in length
● The transportation of metal coils and other metals by air is more expensive
but is the quickest way of delivery.

9. LIVE CASE STUDY

SALTT RESTAURANT & BAR

STRUCTURE A
Oleander Farms Pvt Ltd, Karjat Chowk Road, Vavarle Village Karjat, Khalapur

Container joined with steels

JINDAL SOUTH WEST STEEL LTD. 23

JSW MARKET SURVEY REPORT

JINDAL SOUTH WEST STEEL LTD. 24

JSW MARKET SURVEY REPORT

STRUCTURE B

JINDAL SOUTH WEST STEEL LTD. 25

JSW MARKET SURVEY REPORT

JINDAL SOUTH WEST STEEL LTD. 26

 JSW MARKET SURVEY REPORT

10. ANALYSIS
Based on-

Products- JSW launches new products that are eco- friendly and at the same
time evolves with modern designs based on new technologies. The products
here are lightweight,UV resistant and 100% recycled.

Treatments- JSW provides with numerous treatments on each product

preventing it from climate,corrosion etc. Recently they eveolved new
coating treatment for their products that is JSW radiance.

Transportation - JSW Steel products are well suited to create sustainable

transport solutions that are energy efficient and have minimal role in climate
change, providing strong, durable and enhanced safety.

Cost- It produces low cost steel products that are readily available by
anyone.

JINDAL SOUTH WEST STEEL LTD. 27

JSW MARKET SURVEY REPORT

REFERENCES

1. https://www.jsw.in/steel/hot-rolled-products
2. https://www.jindalsteels.co.in/portfolio/mild-steel-channels/
3. https://www.jindalindia.com/Brochure.pdf
4. https://www.jindalindia.com/Brochure.pdf
5. https://d2lptvt2jijg6f.cloudfront.net/jindalsteelpower/custom/jindalsteelpow
er/1600233684_Parallel_Flange_Beams_%26_Coloumn.pdf
6. https://docs.google.com/presentation/d/1bd0nCGBleIy1lDdNgpBgAeoMg6K
-20p1xm73d8_0T08/edit?usp=sharing
7. https://www.jindalsteels.co.in/portfolio/mild-steel-beams/
8. https://m.indiamart.com/proddetail/frs-roofing-cleat-4320365748.html
9. https://www.jsw.in/sites/default/files/assets/downloads/steel/IR/Financial%2
0Performance/Annual%20Reports%20Steel/jsw-steel-19-20/pdf/JSW%20Ste
el_IR2020_Final.pdf
10. https://www.jsw.in/sites/default/files/assets/downloads/steel/IR/Financial%2
0Performance/Annual%20Reports%20Steel/jsw-steel-19-20/pdf/JSW%20Ste
el_IR2020_Final.pdf
11. JSW Colouron-plus_Brochure
12. JSW Colour coated profile sheets
13. Jindal speed floor brochure
14. Jindal stainless main uv brochure
15. JSW steel brochure final
16. JSW hot rolled brochure
17. JSW special steel brochure

JINDAL SOUTH WEST STEEL LTD. 28