Detailed Lesson Plan in Plumbing tools and Equipment

I. LEARNING OBJECTIVES

At the end of the lesson, the students will be able to:

1. Identify what are the plumbing tools and equipment.

2. Explain the uses of the plumbing tools and equipment.
3. Demonstrate the proper procedure of the plumbing tools and equipment.

II. SUBJECT MATTER

Topic:

Plumbing tools and Equipment

References:
K-TO-12-PLUMBING -LEARNING-MODULE

Materials:
Android phones
Pictures
Video presentation
Laptop

Values Integration: Cooperation, Discipline and Respect

III. PROCEDURE

Teacher's Activity Student's Activity

A. Preliminary Activities

 Greetings

Good Morning, Sir.

Good Morning Class!

May I request everyone to pick some pieces of

papers and trash on your surroundings and arrange
your chairs properly. Yes, Sir

 Prayer
(The name of the father the son and the
May I request Mr. _____ to lead the prayer? holy spirit, Amen.)

Thank you Mr._____

Once again, Good Morning everyone my name is Good Morning, Sir

Danrex P. Tangub I’m your teacher for today.

 Checking of attendance

Say present if your is called.

(All student are present)

B. Motivation:

Before we proceed to our discussion, let’s have a

short game, and we call it Four Pic’s One Word.
The group who can guess the picture can earn plus
points in our quiz later.

Group your selves into 2 groups count off from 1-

to-2.

Direction:

I will post pictures on the board and you will

guess it what is in the picture.

The group 1 sits in the right corner and the second

group at the left corner. I’ll give you 10 minutes to
do your task.

Is that clear! Yes, sir.

Count off! The student starts counting.

For group 1:

Plumbing Tools
P U L M G B N I

O O T S L
For group 2:

Plumbing Equipment

U L P G I B N M

Q U E I M P E T N

Time’s up!

May I request everyone to settle down?

Let us check the task of group 1.

Very good you did the good answer!

How about the group 2.

Very good you did the good answer!

Both groups answered the correct answer. Let’s

have Junicia Clap…1.2.3. Very good, Very good. 1.2.3. Very good, Very good
B. Review

Before we start our lesson for today, Let’s have a

recap if you still remember what we've discussed
yesterday.

May I request anyone from the class?

Yes, Mr./Ms.______.

• What is drainage? Is the natural or artificial removal of a

surface’s water and sub-surface water from
an area with excess of water.

Very good, Mr./Ms.____.

C. Discussion

Our topic for today is all about plumbing and its

tools and equipment.

What is Plumbing?

Plumbing, the system of pipes, tanks, fittings, and

other apparatus required for then water supply,
heating, and sanitation in a building.

1. Plumbing Materials

Steel Pipe

Steel piping is designed for a long list of

applications. Steel piping has gained popularity in
the petroleum, oil, automobile, shipping and food
industries because of its durability and versatility.
Schools, hospitals and refineries also widely
employ steel piping.

PVC PIPE -refers to Poly Vinyl Chloride Plastic

material. This is the most common pipe for
plumbing system.

PE PIPE -refers to Polyethylene Plastic material

intended for long span water system installation.

CI PIPE -is a heavy metal made of casting on

molds to make fixtures. such as sink, tubs and
lavatories, covered with a porcelain enamel
coating.

GI PIPE -is a galvanized iron pipe which is better

fitted for plumbing installation than steel pipe. It is
constructed of rough iron, dipped in molten zinc
and maybe identified by its dull grayish color

SOLVENT -is an adhesive material usually used

externally.

TEFLON TAPE -is specifically used for

attachment threaded pipe on fittings.
ABS CLEANER AND CEMENT -is an adhesive
material used by a plumbean when working with
ABS pipes.

FITTINGS -are made in different forms that are

intended for plumbing joints and connections.

FAUCET -is a point of installation system where

flow of water or gas could be manipulated.
 2. PLUMBING TOOLS

MEASURING TOOLS- is the activity of

obtaining and comparing physical quantities of
real-world objects and events. Established standard
objects and events are used as units, and the
process of measurement gives a number relating
the item under study and the referenced unit of
measurement.

L-SQUARE/STEEL- is used to create scaled

patterns from original sewing patterns.

PUSH-PULL RULE- it is used to measure long,

short, and straight lengths.
CUTTING TOOLS- is any tool that is used to
remove material from the work piece by means of
shear deformation. Cutting may be accomplished
by single-point or multipoint tools. Single-point
tools are used in turning, shaping, planning and
similar operations, and remove material by means
of one cutting edge. Milling and drilling tools are
often multipoint tools. Grinding tools are also
multipoint tools.

Hacksaw- is a hand-powered, small-toothed saw

used for cutting metal pipes, rods, brackets, etc.

Pipe Cutter- used for slicing or cutting pipes.

Pipe Threader - cuts pipe, it threads pipe, it can
ream the ends to remove burrs.

HOLDING TOOLS-Tool for holding firmly any

material that has to be cut.

Adjustable Wrench- to grips fasteners, such as

nuts and nuts.

Clamp- a device designed to bind or constrict or to

press two or more parts together so as to hold them
firmly.
Bench Vise- used to secure an object that is to be
worked on.

Pipe Vise- used to hold pipes or tubing secure

while they’re cut or threated.

Is there any question, suggestion and clarification

regarding to our lesson for today class?
 None so far sir.

I. Activity

This time class I want you to pay attention and

participate our activity.

Direction: Get ½ sheet of paper and answer the

following questions. Based to the classifications,
identify the following tools and equipment from the
box below. You have 10 minutes to answer.

L-Square/Steel Clamp Pipe Vise

Steel Pipe

Push-Pull Rule Bench Vise PVC Pipe

Hacksaw PE Pipe CI Pipe GI Pipe

Solvent

Pipe Cutter Teflon Tape

ABS Cleaner and Cement Pipe Threader

Adjustable Wrench Fittings Faucet

hammer Pail

Time’s up!

Finish or not finish pass the paper at the front in a

count of 10,9,8,7,6,5,4,3,2,1,.

Let us check!
Plumbing Tools
Plumbing Tools
1. L-Square/Steel
2. Push-Pull Rule 1. L-Square/Steel
3. Hacksaw 2. Push-Pull Rule
3. Hacksaw
 4. Pipe Cutter 4. Pipe Cutter
5. Pipe Threader 5. Pipe Threader
6. Adjustable Wrench 6. Adjustable Wrench
7. Clamp 7. Clamp
8. Bench vise 8. Bench vise
9. Pipe vise 9. Pipe vise

Plumbing Equipment Plumbing Equipment

1. Steel pipe 1. Steel pipe

2. PVC pipe 2. PVC pipe
3. PE pipe 3. PE pipe
4. CI pipe 4. CI pipe
5. GI pipe 5. GI pipe
6. Solvent 6. Solvent
7. Teflon tape 7. Teflon tape
8. ABS Cleaner and cement 8. ABS Cleaner and cement
9. Fittings 9. Fittings
10. Faucet 10. Faucet

II. Analysis

Do you find the activity difficult?

(mixed answer)

What do you think about inside the box?

(the teacher will ask someone to answer)
Plumbing tools and equipment is in the
box sir.

Very good!

All of those inside the box that are given are

plumbing tools and equipment.
What specific thing that these tools and
equipment can be used for?
Provide a wide variety of services such as
repairing water leaks, clearing slow or
clogged drains in the house, building and
etc.

Very good!

III. Abstraction

Before we proceed to the next part of our

class for today let us define what is holding
tools?

Anyone from the class?

Yes Mr./Ms._____.

Used for holding the pipes, pipe fittings

and fixtures for pluming operation.

Give at least 3 holding tools.

Adjustable wrench, Bench vise and Pipe
vise.
Very good!

What is measuring tools?

Yes Mr./Ms._____.
Used to measure lengths and to draw
straight lines.
Give at least 2 measuring tool.

L-Square and Pull-Push rule

Excellent!
 What is cutting tool?

Yes Mr./Ms._____.
Used for slicing cutting pipes.
Very good!

Give at least 2 cutting tools.

Hacksaw and steel pipe threader.
Excellent!

Give at least 3 equipment of plumbing.

Yes Mr./Ms._____.
PVC pipe, steel pipe and solvent.

Very good!

IV. Application

I have here a random questions in the board all you

need to do is select the tools or equipment that is
align/correct use with the possible question.

It is an essential material for preventing

leaks at threaded plumbing connection?
(the student pick the picture of Teflon)
Very good!

It is used to grips fasteners, such as nuts and

nuts? (the student pick the picture of adjustable
wrench)

Very good!
 It is a device designed to bind or constrict or
to press two or more parts together so as to hold
them firmly?
(the student pick the picture of clamp)

Excellent!

It is used to secure an object that is to be

worked on.
(the student pick the picture of bench vise)

Very good!

It is used to hold pipes or tubing secure

while they’re cut or threated.

(the student pick the picture of pipe vise)

Very good!

IV. Evaluation

Direction: Answer the following question and write your answers in the space provided.

1._______ is designed for a long list of applications. Steel piping has gained popularity in the
petroleum, oil, automobile, shipping and food industries because of its durability and versatility.
Schools, hospitals and refineries also widely employ steel piping.

2._______ refers to Poly Vinyl Chloride Plastic material. This is the most common pipe for
plumbing system.
 3._______ refers to Polyethylene Plastic material intended for long span water system
installation.

4._______ is a heavy metal made of casting on molds to make fixtures. such as sink, tubs and
lavatories, covered with a porcelain enamel coating.

5._______ is a galvanized iron pipe which is better fitted for plumbing installation than steel
pipe. It is constructed of rough iron, dipped in molten zinc and maybe identified by its dull
grayish color

6._______Tool for holding firmly any material that has to be cut.

7._______to grips fasteners, such as nuts and nuts.

8._______ a device designed to bind or constrict or to press two or more parts together so as to
hold them firmly.
9._______ used to secure an object that is to be worked on.

10._______ used to hold pipes or tubing secure while they’re cut or threated.

V. Assignment

1. Research what are the plumbing safety precautions and write it in a ½ sheet of paper.

That’s all for today’s lesson class

Class dismiss good bye class!

Good bye, sir!

Prepared by:

DANREX P. TANGUB
BTLED-IA 3A