Scribd
Upload
142 views3 pages

Revision Notes Class - 8 Science Chapter 6 - Combustion and Flame

The document discusses combustion and flames. It defines combustion as a chemical reaction that produces heat and light when a substance reacts with oxygen in the air. It also defines ignition temperature and discusses how to control fires using water, fire extinguishers or sand depending on the type of fuel. It describes three types of combustion: rapid, spontaneous, and explosion. It then discusses the zones of a flame and defines fuel as any substance that undergoes combustion to produce energy. It lists properties of good fuels and types of fuels such as solid, liquid and gaseous fuels. Finally, it discusses the harmful effects of burning fuels such as releasing carbon particles, carbon monoxide and greenhouse gases.

Uploaded by

Arpit Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
142 views3 pages

Revision Notes Class - 8 Science Chapter 6 - Combustion and Flame

The document discusses combustion and flames. It defines combustion as a chemical reaction that produces heat and light when a substance reacts with oxygen in the air. It also defines ignition temperature and discusses how to control fires using water, fire extinguishers or sand depending on the type of fuel. It describes three types of combustion: rapid, spontaneous, and explosion. It then discusses the zones of a flame and defines fuel as any substance that undergoes combustion to produce energy. It lists properties of good fuels and types of fuels such as solid, liquid and gaseous fuels. Finally, it discusses the harmful effects of burning fuels such as releasing carbon particles, carbon monoxide and greenhouse gases.

Uploaded by

Arpit Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Revision Notes

Class - 8 Science
Chapter 6 - Combustion and Flame

The process in which a substance undergoes a chemical reaction in the presence


of air (oxygen) to produce heat and light is called combustion.
The substance which undergoes combustion is called combustible. Combustion
cannot take place in absence of oxygen.

Ignition temperature:
The lowest temperature at which a combustible substance catches fire under
given pressure conditions is called ignition temperature.
The substances which have very low ignition temperature and can easily catch
fire with a flame are called inflammable substances.

Controlling fire:
Fire can be controlled by removing one or more requirements essential for
producing fire.
Water is commonly used to control fires caused by substances other than oils
and electrical equipment as it can worsen the conditions.
As water cannot be used to control fires involving electrical equipments or oils,
fire extinguisher or sand is used to put out the fire.

Types of combustion:
The type of combustion depends upon the type of fuel used. Combustions are
classified on the basis of nature and intensity, which are of three types. They
are:
(i) Rapid combustion:
When a substance burns rapidly and produces heat and light, such
combustion is called rapid combustion. For example, burning of a
matchstick, gas stove.

(ii) Spontaneous combustion: The type of combustion in which a material


suddenly bursts into flames, without the application of any apparent cause
is called spontaneous combustion. For example, burning of phosphorus,
burning of camphor.

(iii) Explosion:
A large amount of gas formed in the reaction is liberated. Such a reaction
is called explosion. For example, a fire cracker, missile.

1. Flame:
It is a zone or burning vapour caused by substances during combustion. For
example: Kerosene oil and LPG gas, coal etc.
Zones of a flame:
There are three different zones of a flame –
Dark zone: near the surface of combustible substance which is the least hot due
to incomplete combustion.
Luminous zone: brightest zone due to partial combustion.
Non-luminous zone: outermost part of the flame which is the hottest zone due
to complete combustion.

2. Fuel:
Fuel is any substance that undergoes combustion to obtain energy that can be
used to heat or move another object.

Property of a good fuel: A


good fuel must:
• Be readily available.
• Be cheap.
• Burn easily at a moderate rate.
• Should have high calorific value.
• Not leave behind any undesirable substances after combustion.
Fuel efficiency is expressed in terms of its calorific value which is the amount
of heat energy produced on complete combustion of 1 kg of a fuel and is
expressed in units of kilo joule per kg(kJ/kg).
Types of Fuels:
(i) Solid Fuels: solid fuels are combustible substances that are solid at room
temperature. For example: coal, camphor, wood, charcoal etc.
(ii) Liquid fuels: Volatile liquids which produce combustible vapour are
called liquid fuels. These are widely used fuels in our vehicles. For example:
Petrol, kerosene, diesel etc.
(iii) Gaseous fuels: Combustible gases or mixture of combustible gases are
called gaseous fuels. For example: CNG, LPG, propane, biogas etc.

Harmful Effects of Burning of Fuels:


(i) Fuels containing carbon like wood, coal or any fossil fuel release unburnt
carbon particles (called suits). These are dangerous pollutants which
cause respiratory diseases, such as asthma or even cancer.
(ii) Incomplete combustion of carbon fuels gives carbon monoxide which is
a poisonous gas and prolonged exposure can be fatal.
(iii) Increased concentration of carbon dioxide in the air which is called
greenhouse gas is causing global warming.
(iv) Oxides of Sulphur and nitrogen dissolve in rain water and form acids.
Such rain is called acid rain. It is very harmful for crops, buildings and
soil as it increases acidity of the soil and corrodes the metal surface faster.

You might also like