Scribd
Upload
2K views2 pages

4 Technical Data 2011: 4.1 Test and Adjustment Data

Uploaded by

pearl nojoke
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views2 pages

4 Technical Data 2011: 4.1 Test and Adjustment Data

Uploaded by

pearl nojoke
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

4 Technical data

2011 4.1 Test and adjustment data

ID
Name Additional information Value Unit
No.

01 47 Valve seat angle (inlet) FL/M engines 45 °

B/FL/M engines 30 °

01 48 Valve seat angle (outlet) FL/M engines 45 °

BFL/M engines 45 °

01 50 Valve spring

01 51 Valve spring length (unclamped normal) Wire diameter 3.35 mm 38.9 mm

Wire diameter 3.40 mm 39.3 mm


4
01 60 Valve clearance

01 61 Valve clearance (inlet) • after a cooling time of at


least 0.5 h (oil 0.3 ±0.05
temperature < 80 °C)

• Test and setting values


in inspections from a
running time of
50 operating hours of mm
the engine or life of the
cylinder head gasket (0.4 ±0.05)
(see maintenance
schedule)
• Setting values when
changing the cylinder
head gasket

01 62 Valve clearance (outlet) • after a cooling time of at


least 0.5 h (oil 0.5 ±0.05
temperature < 80 °C)

• Test and setting values


in inspections from a
running time of
50 operating hours of mm
the engine or life of the
cylinder head gasket (0.6 ±0.05)
(see maintenance
schedule)
• Setting values when
changing the cylinder
head gasket

© 11/2004 7/22 0312 1642 - 0138


4 Technical data
4.1 Test and adjustment data 2011

ID
Name Additional information Value Unit
No.

01 63 Valve clearance setting scheme

• Turn over engine up until reaching the valve overlap cyl. no. 1.

Note
According to the order below (see table) the valve clearance setting is possible with
2 crankshaft revolutions á 360°.

Crankshaft setting 1 Cyl. no. 1 = overlap

white = not adjustable


4 black = adjustable

Crankshaft setting 2 white = not adjustable


• Turn the crankshaft one rev on (360°). black = adjustable

© 11/2004 8/22 0312 1642 - 0138

You might also like