Scribd
Upload
242 views15 pages

WHB04B-4:4 WHB04B-6:6

The document describes the functions of buttons on a wireless handwheel for CNC machine control. It includes 10 programmable macro buttons, and buttons for operations like start, stop, increasing and decreasing feed and spindle speed. The handwheel can be set to either continuous or step modes with varying speeds. It also provides instructions for configuring the macro buttons within the Mach3 plugin software.

Uploaded by

Marko Curic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
242 views15 pages

WHB04B-4:4 WHB04B-6:6

The document describes the functions of buttons on a wireless handwheel for CNC machine control. It includes 10 programmable macro buttons, and buttons for operations like start, stop, increasing and decreasing feed and spindle speed. The handwheel can be set to either continuous or step modes with varying speeds. It also provides instructions for configuring the macro buttons within the Mach3 plugin software.

Uploaded by

Marko Curic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

WHB04B-4:4

WHB04B-4:4 axis,wireless handwheel


WHB04B-6:6
WHB04B-6:6 axis,wireless handwheel
,support 10 macro function button
RESET button

Stop button

Start/Pause button:When machine stops,press


the button,machine starts to work ;When
machine is working, press the button,machine
stop working

Macro-1/Feed+ button:When press the button


alone,macro function-1 works; When press the
+ ,Processing speed increase.

Macro-2/Feed- button:When press the button


alone,macro function-2 works; When press the
+ ,Processing speed decreases.
Macro-3/Spindle- button:When press the
button alone,macro function-3 works; When
press the + ,Spindle speed increases.

Macro-4/Spindle- button:When press the


button alone,macro function-4 works; When
press the + ,Spindle speed reduction.

Macro-5/M-HOME button:When press the


button alone,macro function-5 works; When
press the + ,refer all home.

Macro-6/M-HOME button:When press the


button alone,macro function-6 works; When
press the + ,Return to the safe height

of the Z axis
Macro-7/W-HOME button:When press the
button alone,macro function-7 works; When
press the + ,go to zero work .

Macro-8/S-ON/OFF button:When press the


button alone,macro function-8 works; When
press the + ,Spindle on or off.

Macro-9/ probe-Z button:When press the


button alone,macro function-9 works; When
press the + ,probe Z

Macro-10 button:press the button,macro


function-10 works.

Function button:When you press the button,


then press the other button to achieve the
combination function.
MPG MPG button:press the button,Hand wheel
into Continuous mode.

Step button: press the button,Hand wheel


into Step mode

0.001（2 % )

0.01(5%)

0.1(10%)

1.0(30%)

60%

100%

Lead:

-7-
Selection speed：
0.001（2%）:When handwheel in
Step mode,move unit 0.001;when in
Continuous mode,move speed is 2%
0.01(5%):When handwheel in step
mode,move unit 0.01;when in
Continuous mode,move speed is 5%
0.1(10%):When handwheel in step
mode,move unit 0.1;when in
Continuous mode,move speed is 10%
1.0(30%):When handwheel in step
mode,move unit 1.0;when in
Continuous mode,move speed is 30%
60%:When handwheel in Continuous
mode, move speed is 60%
100%:When handwheel in Continuous
mode,move speed is 100%
Mode：
CON：Continuous
Step:Step
Explantion：
Key success indication:When you press the button,the receiver
receives the key value,the indicator flashes about,indicating
successful key operation.

Speed indicator :When you press MPG button,band switch to


select 2%,5%...,LCD display CON and different speed.When
you press Step button,band switch to select 0.001,0.01...,LCD
display Step and different speed.

Axis selected location:Axis selection switch position,LCD


display axis selected. X: X axis workpiece coordinate axis,
X1: X axis mechanical coordinate
Plugin instructions

Open Mach3 and go to the “Config”menu choice and select


“Config Plugins”.You should see “ShuttlePro-V3xx-XHC-
HB04BX-FOR-MACH3”,Click the “CONFIG” in yellow and
macro button function as you wish.

-12-
Plugin instructions

3 2

2.After Click the yellow"CONFIG",there will be plug-in settings


interface,According to the following method set.

-13-
Plugin instructions

First step:Click the Macro-1 drop-down menu button,choice


“Custom Macro#1”, Macro-2 choice "Custom Macro#2",
And so on.Click Macro-9 drop-down menu button,choice
“OEM Custom Code#1”, Macro-10 choice “OEM Custom
Code#2”.

Second step:In the following “Macro Number ” input M


code you need.Macro-1 corresponds to Macro number 1.
and so on. Macro-9 corresponds to OEM Custom Code#1,
Macro-10 corresponds to OEM Custom Code#2.

(The M code you entered must be copied to the Mach3>


macro>Mach3Mill folder)

-14-

You might also like