Page 1 of 5
205-02 Rear Drive Axle/Differential - Vehicles With: Dana M220 2019 Ranger
General Procedures Procedure revision date: 11/27/2018
Differential Draining and Filling
Materials
Name Specification
Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant WSP-M2C197-A
XY-80W90-QL
Draining
1. With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting (100-02 Jacking and Lifting, Description and Operation).
2. Remove and discard the differential oil fill plug.
3. NOTE: Be prepared to collect escaping fluids.
Remove and discard the differential oil drain plug.
http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN... 1/16/2019
Page 2 of 5
4. NOTE: Make sure that a new component is installed.
Install the differential oil drain plug.
Torque: 20 lb.ft (27 Nm)
Filling
http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN... 1/16/2019
Page 3 of 5
1. Fill the differential with clean differential gear lubricant.
Refer to: Specifications (205-02 Rear Drive Axle/Differential - Vehicles With: Dana M220, Specifications).
Material: Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant / XY-80W90-QL (WSP-M2C197-A)
2. Check the differential fluid level. The differential gear lubricant level should be to the bottom of fluid fill plug
opening.
http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN... 1/16/2019
Page 4 of 5
3. NOTE: Make sure that a new component is installed.
Install the differential fluid fill plug.
Torque: 20 lb.ft (27 Nm)
Copyright © 2019 Ford Motor Company
http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN... 1/16/2019
Page 5 of 5
http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN... 1/16/2019
