Flocrete W52
Flocrete W52
Description
Technical Properties @ 250C:
Flocrete W52 is a high performance liquid concrete
Colour: Brown liquid
admixture formulated from selected polymers specially
designed to enable the water content of the concrete to Freezing point: ≈ -2°C
perform more effec vely.
Specific gravity: 1.21 ± 0.02
This effect can be used to reduce permeability, improve Chloride content:
workability and to increase ul mate strengths with very Nil
BS 5075
high levels of water reduc on in the concrete mix.
Typically less than 2%
Applications addi onal air is entrained
Air entrainment:
above control mix at normal
To produce high quality concrete of improved dosages
durability by reducing permeability.
To increase workability reten on of fresh concrete. An automa c dispenser should be used to dispense the
To provide increased ul mate strength gain by correct quan ty of Flocrete W52 to the concrete mix.
reducing water demand in concrete mixes.
Dosage
Advantages
The guidance dosage of Flocrete W52 is 1.00 - 2.40 litre
More durable concrete as a result of reduc on in per 100 kg of cemen ous materials in the mix, including
permeability and lower water to cement ra o. GGBFS, PFA or microsilica.
Higher strength with same cement content.
Minimizing segrega on problems by improving Representa ve trials should be conducted to determine
cohesion. the op mum dosage of Flocrete W52 to meet the
Improved workability reduces placing and compac on performance requirements by using the materials and
problems. condi ons in actual use.
Cement saving without affec ng strength.
Chloride free. Effects of Over Dosage
Flocrete W52 can be used with all types of Portland Significant increase in retarda on.
cement and cement replacement materials. Flocrete Increase in workability.
W52 is compa ble with other DCP admixtures used in the
same concrete mix. If more than one type of admixture Ul mate concrete strength will not be adversely affected
is to be used in concrete mix, they must be dispensed to and will generally be increased provided that proper
the concrete separately. concrete curing is maintained.
Flocrete W52 complies with ASTM C494, Type B, D and G, Although the se ng me is dependent on the dosage of
depending on dosage used. Flocrete W52, the following factors should be considered:
Cautions
Fire