DQ-180229 - Sierra Gorda Tailings Thickener

Data sheet

C giodam 1/19/2019 giodam 1/19/2019 roddia 1/19/2019 Para Aprobación

B giodam 12/13/2018 giodam 12/13/2018 roddia 12/13/2018 Para Aprobación
A giodam 12/11/2018 giodam 12/11/2018 roddia 12/11/2018 Para Coordinación Interna
Name Date Name Date Name Date
Rev Revision Text
Prepared Checked Released
Status: Original Size:
Certificado / Nueva revision será emitida durante etapa de suminsitros
Customer: Project Phase: Site Nr.:
MINERA SIERRA GORDA SCM - FLUOR
Project Name: Customer Document ID:
SIERRA GORDA TAILINGS THICKENER TAG: 5111-TK-004
Replaced by: Replaces:

Document Title:

Instrument List
86 M Tailing Thickeners
Sierra Gorda
MINERA SIERRA GORDA SCM - FLUOR
Ref.
Equipment No.: Item No.:
[-----] [-----]
Project ID: Plant Code: Plant Unit Code: Document Type: Running No: Revision: Sheet of Sheets:

308122 [-----] [----] [-----] [-----] C

The contents of this document are the sole property of Outotec Oyj. Any rights not expressly granted herein are reserved. Reproduction, Outotec Document ID:
transfer or distribution of part or all of the contents in any form without the prior written permission of Outotec is prohibited.
DQ180229-E30-000-IN-DS-0001
 1 GENERAL 6 GENERAL
2 Project Name PROYECTO SIERRA GORDA ESPESADORES 86M 7
3 Area Name AREA ESPESADOR DE COLAS 8 Location FIELD
4 TAG 5111-LIT-61320 9 Area Class NON HAZARDOUS TYPE
5 Service NIVEL CAMA ESPESADOR DE COLAS 5111-TK-004 10 P&ID DQ180229-G3817-T10-0250
11 PROCESS CONNECTION 60 PERFORMANCE CHARACTERISTICS
12 Body/Fitting type 61 Max press at design temp Kpa (a) At °C
13 Process conn nominal size Rating 62 Min working temperature 2 °C Max 50 °C
14 Process conn termn type N/R Style 63 Accuracy rating < 0,5% FULL SCALE OR BETTER
15 Wetted material POLYPROPYLENE 64 Level lower range limit 0.2 m URL 12 m
16 Flange material 65 Min measurement span 0.2 m Max 12 m
17 Seal/O ring material N/R 66 Beam angle 11° OR LESS
18 67 Min ambient working temp 0 °C Max 50 °C
19 SENSING ELEMENT 68 Contacts ac rating N/R At max
20 Detector type ULTRASONIC 69 Contacts dc rating N/R At max
21 Detector style INMERSED 70 Max sensor to receiver lg
22 Insertion length 140 mm 71
23 Integral cable length 10 m 72
24 73
25 CONNECTION HEAD 74
26 Type INTEGRATED W/ TRANSMITTER 75
27 Enclosure type no/class NEMA 4X 76
28 Cert/Approval type GENERAL PURPOSE 77
29 Mounting location/type FIELD/PIVOT BRACKET MOUNTED 78
30 Enclosure material ALUMINUM EPOXIC PAINTED 79
31 80
32 TRANSMITTER w/wo SWITCHES 81
33 Housing type REMOTE WALL MOUNTED 82
34 Measurement compensation INCLUDED 83
35 Output signal type 4-20 mA, ISOLATED 84 ACCESSORIES
36 Enclosure type no/class NEMA 4X 85 Connecting cables length N/R
37 Control sequence 86 Enclosure heater N/R
38 Characteristic curve LINEAR RESPECT MEASURED LEVEL 87 Mounting hardware INCLUDED
39 Digital communication std HART 88
40 Signal power source 110 VAC, 50 HZ 89
41 Contact arrangement 90
42 Failsafe style 91
43 Integral indicator style DIGITAL, 3/2 DIGITS, INTEGRATED,LIGHTED 92
44 Cert/Approval type GENERAL PURPOSE 93
45 Mounting location/type FIELD/WALL MOUNTED 94 SPECIAL REQUIREMENTS
46 Failure/Diagnostic action 95 Custom tag REQUIRED AS INDICATED ON ITEM 4
47 Signal processing INCLUDED, ECHO SUPPRESION 96 Reference specification MQCL-1000-IND-000-ESP-IN00-0006
48 Enclosure material ALUMINUM EPOXIC PAINTED 97 Compilance standard IEC,IEEE,ISA
49 98 Calibration report INCLUDED
50 99 Software configuration N/R
51 100
52 101 PHYSICAL DATA
53 102 Estimated weigth 3.5 Kg
54 103 Face-to-face dimension
55 104 Overall height 130x185 mm
56 105 Removal clearance
57 106 Signal conn nominal size 1/2 INCH Style THREADED / NPT
58 107 Mfr reference dwg
59 108
110 CALIBRATION AND TEST INPUT OR TEST OUTPUT OR SCALE
111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV LRV URV ACTION
112 Level-Analog Output 0m 6m 4 mA 20 mA
113 Level-Scale
114 Level setpoint 1-Output
115 Level setpoint 2-Output
116 Level setpoint 3-Output
117
118 COMPONENTS AND IDENTIFICATIONS
119 COMPONENT TYPE MANUFACTURER MODEL NUMBER
120 TRANSMISOR HACH SC 200
121 SENSOR HACH SONATAX SC
122
123
124 NOTES
125 VTS = VENDOR TO SPECIFY
126 N/R = NOT REQUIRED
127
128 ALL PARTS MUST MUST SATISFY TECHNICAL SPECIFICATION AS INDICATED ON ITEM 96
129 NOTA: SENSOR ULTRASÓNICO DE NIVEL VA SUMERGIDO EN CONTACTO CON EL AGUA (INTERFACE)
130
131
132
133
134
135
136
137
138
139
REV REV DESCRIPTION DATE BY APP REMARKS PROJECT NUMBER

DQ-180229

DOCUMENT NUMBER
C EMITIDO PARA APROBACIÓN 19.01.19 GDC RDP INSTRUMENT DATA SHEET
B EMITIDO PARA APROBACIÓN 14.12.18 GDC RDP E30-000-IN-ME-DS-0001 NON CONTACT ULTRASONIC LEVEL
A EMITIDO PARA COORD. INT. 04.12.18 GDC RDP Device Specification
ISA FORM 20L2171 REV 0
 1 GENERAL 6 GENERAL
2 Project Name PROYECTO SIERRA GORDA ESPESADORES 86M 7
3 Area Name AREA ESPESADOR DE COLAS 8 Location FIELD
4 TAG 5111-PIT-61322 9 Area Class NON HAZARDOUS TYPE
5 Service PRESIÓN MASA ESPESADOR DE COLAS 5111-TK-004 10 P&ID DQ180229-G3817-T10-0250
11 TRANSMITTER BODY 60 PERFORMANCE CHARACTERISTICS
12 Body/Flange type FLANGE-MOUNTED LIQUID LEVEL TRASMITER 61 Max press at design temp kPa At 15 ºC
13 Process conn nominal size 3 INCH Rating ANSI 150 62 Min working temperature -40 ºC Max 250 ºC
14 Process conn termn type FLANGE INCH Style RF 63 Accuracy rating < 0,5% FULL SCALE OR BETTER
15 Vent/Drain location 64 Pressure Lower Range-Limit 0 kPa URL 200 kPa
16 Mounting type FLANGE-MOUNTED 65 Ambient temperature error VTS
17 Body/Flange material SS 316 66 Min ambient working temp -40 ºC Max 80 ºC
18 Vent/Drain material N/R 67
19 Bolting material N/R 68
20 Flange adapter material SS 316 69
21 Gasket/O ring material RUBBER 70
22 Mounting kit material PLASTIC 71
23 72
24 SENSING ELEMENT 73
25 Detector type PIEZORESISTIVE 74
26 Min pressure span 0 kPa Max 200 kPa 75
27 Diaphragm/Wetted material SS 316 76
28 Fill fluid material SILICON OIL 77
29 78
30 TRANSMITTER 79
31 Output signal type DIGITAL, SEE ITEM 34 80
32 Enclosure type no/class NEMA 4X 81
33 Characteristic curve LINEAR 82
34 Digital communication std FIELDBUS FOUNDATION H1 83
35 Signal power source 24 VDC 84 ACCESSORIES
36 Transient protection 85 Air set filter style N/R
37 Integral indicator style DIGITAL, INTEGRATED, 3 1/2 DIGIT 86 Air set gauges N/R
38 Signal termination type 87 Heating kit style N/R
39 Cert/Approval type N/R 88 Remote indicator style N/R
40 Span-Zero adjust lct INCLUDED 89
41 Failure/Diagnostic action 90
42 Enclosure material ALUMINIUM EPOXID PAINTED 91
43 92
44 DIAPHRAGM SEAL 93
45 Seal type 94 SPECIAL REQUIREMENTS
46 Process conn nominal size 3 INCH Rating ANSI 150 95 Custom tag REQUIRED AS INDICATED IN NUMBER 4
47 Process conn termn type EXTENDED FLANGED Style RF 96 Reference specification MQCL-1000-IND-000-ESP-IN00-0006
48 Diaphragm extension lg 4" ( 100 mm) 97 Compilance standard IEC, IEEE, ISA
49 Flushing conn quantity N/A 98 Calibration report INCLUDED
50 Instrument conn nom size 1 INCH 99 Software configuration N/R
51 Capillary/Fitting dia N/R INCH Lenght N/A 100
52 Diaphragm material HASTELLOY C 101 PHYSICAL DATA
53 Capillary-armor matl N/R 102 Estimated weigth Kg
54 Bolting material TBC 103 Face-to-face dimension
55 Upper housing material TBC 104 Overall height mm
56 Lower housing/Flange matl TBC 105 Removal clearance
57 Gasket/O ring material N/A FULLY WELDED 106 Signal conn nominal size 1/2 inch Style THREADED / NPT
58 Fill fluid material SILICONE OIL 107 Mfr reference dwg TI00383P/00/EN/13.11
59 108
110 CALIBRATION AND TEST INPUT OR TEST OUTPUT OR SCALE
111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV LRV URV ACTION
112 Pressure analog output 0 Kpa 200 KPa
113 Pressure scale
114 Pressure digital output
115 Temperature digital output
116
117
118 COMPONENTS AND IDENTIFICATIONS
119 COMPONENT TYPE MANUFACTURER MODEL NUMBER
120 SENSOR/TRANSMITTER ENDRESS+HAUSER CERABAR S PMP75-AAC1KC1
121
122
123
124 NOTES
125 VTS = VENDOR TO SPECIFY
126 N/R = NOT REQUIRED
127
128 ALL PARTS MUST SATISFY TECHNICAL SPECIFICATION AS INDICATED ON ITEM 96
129
130
131
132
133
134
135
136
137
138
139
REV REV DESCRIPTION DATE BY APP REMARKS PROJECT NUMBER

DQ-180229

DOCUMENT NUMBER
C EMITIDO PARA APROBACIÓN 19.01.19 GDC RDP INSTRUMENT DATA SHEET
B EMITIDO PARA APROBACIÓN 14.12.18 GDC RDP E30-000-IN-ME-DS-0001 PRESSURE TRANSM. W/DIAPHRAGM SEAL
A EMITIDO PARA COORD. INT. 04.12.18 GDC RDP Device Specification
ISA FORM 20P2211 REV 0
 1 GENERAL 6 GENERAL
2 Project Name PROYECTO SIERRA GORDA ESPESADORES 86M 7
3 Area Name AREA ESPESADOR DE COLAS 8 Location FIELD
4 TAG 5111-ZIT-61300 9 Area Class NON HAZARDOUS TYPE
5 Service POSICIÓN DE RASTRA ESP. DE COLAS 5111-TK-004 10 P&ID DQ180229-G3817-T10-0250
11 PROCESS CONNECTION 60 PERFORMANCE CHARACTERISTICS
12 Body/Fitting type CYLINDRICAL SCREWED 61 Max press at design temp 3 bar At °C
13 Process conn nominal size 1-1/2 INCH Rating ANSI 150 62 Min working temperature -40 °C Max 80 °C
14 Process conn termn type THREADED Style NPT 63 Accuracy rating < 0,5% FULL SCALE OR BETTER
15 Wetted material PVDF/VITON 64 Level lower range limit 0 m URL 600 mm
16 Flange material N/A 65 Min measurement span 0 m Max 600 mm
17 Seal/O ring material N/A 66 Beam angle 11° OR LESS
18 67 Min ambient working temp -40 °C Max 80 °C
19 SENSING ELEMENT 68 Contacts ac rating N/R At max
20 Detector type ULTRASONIC DETECTOR 69 Contacts dc rating N/R At max
21 Detector style NON CONTACT 70 Max sensor to receiver lg
22 Insertion length N/A 71
23 Integral cable length N/A 72
24 73
25 CONNECTION HEAD 74
26 Type INTEGRATED W/ TRANSMITER 75
27 Enclosure type no/class NEMA 4X 76
28 Cert/Approval type N/R 77
29 Mounting location/type FIELD 78
30 Enclosure material ALUMINUM EPOXIC PAINTED 79
31 80
32 TRANSMITTER w/wo SWITCHES 81
33 Housing type INTEGRATED W/ TRANSMITER 82
34 Measurement compensation REQUIRED 83
35 Output signal type 4-20 mA ISOLATED, FOUR WIRES 84 ACCESSORIES
36 Enclosure type no/class NEMA 4X 85 Connecting cables length N/R
37 Control sequence 86 Enclosure heater N/R
38 Characteristic curve LINEAR RESPECT MEASURED LEVEL 87 Mounting hardware N/R
39 Digital communication std HART 88
40 Signal power source 24 VDC, 2 WIRE 89
41 Contact arrangement 90
42 Failsafe style 91
43 Integral indicator style DIGITAL, 3/2 DIGITS, INTEGRATED 92
44 Cert/Approval type GENERAL PURPOSE 93
45 Mounting location/type FIELD 94 SPECIAL REQUIREMENTS
46 Failure/Diagnostic action INCLUDED 95 Custom tag REQUIRED AS INDICATED ON ITEM 4
47 Signal processing INCLUDED 96 Reference specification MQCL-1000-IND-000-ESP-IN00-0006,REV.1
48 Enclosure material ALUMINUM EPOXIC PAINTED 97 Compilance standard IEC,IEEE,ISA
49 98 Calibration report INCLUDED
50 99 Software configuration N/R
51 100
52 101 PHYSICAL DATA
53 102 Estimated weigth 2.5 Kg
54 103 Face-to-face dimension
55 104 Overall height 298 mm
56 105 Removal clearance
57 106 Signal conn nominal size 1/2 INCH Style THREADED / NPT
58 107 Mfr reference dwg TI069D/en/06.10
59 108
110 CALIBRATION AND TEST INPUT OR TEST OUTPUT OR SCALE
111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV LRV URV ACTION
112 Level-Analog Output 0 mm 600 mm 4 mA 20 mA
113 Level-Scale
114 Level setpoint 1-Output
115 Level setpoint 2-Output
116 Level setpoint 3-Output
117
118 COMPONENTS AND IDENTIFICATIONS
119 COMPONENT TYPE MANUFACTURER MODEL NUMBER
120 SENSOR TRANSMISOR ENDRESS+HAUSER FMU40-ANB2A41
121
122
123
124 NOTES
125 VTS = VENDOR TO SPECIFY
126 N/R = NOT REQUIRED
127
128 ALL PARTS MUST MUST SATISFY TECHNICAL SPECIFICATION AS INDICATED ON ITEM 96
129
130
131
132
133
134
135
136
137
138
139
REV REV DESCRIPTION DATE BY APP REMARKS PROJECT NUMBER

DQ-180229

DOCUMENT NUMBER
C EMITIDO PARA APROBACIÓN 19.01.19 GDC RDP INSTRUMENT DATA SHEET
B EMITIDO PARA APROBACIÓN 14.12.18 GDC RDP E30-000-IN-ME-DS-0001 NON CONTACT ULTRASONIC LEVEL
A EMITIDO PARA COORD. INT. 04.12.18 GDC RDP Device Specification
ISA FORM 20L27 REV 0
 1 GENERAL 6 GENERAL
2 Project Name PROYECTO SIERRA GORDA ESPESADORES 86M 7
3 Area Name AREA ESPESADOR DE COLAS 8 Location FIELD
4 TAG 5111-ZSH-61313 9 Area Class NON HAZARDOUS TYPE
5 Service LIMITE SUPERIOR DE POSICIÓN DE RASTRA 10 P&ID DQ180229-G3817-T10-0250
11 SWITCH HOUSING 60 PERFORMANCE CHARACTERISTICS
12 Housing type Fixed 61 Min operating voltage 0 VAC Max 240 VAC
13 Construction style Rotary head 62 Repeatability <5% Ref
14 Nominal size 77 mm 63 Overload trigger
15 Enclosure type no/class NEMA 4X 64 Short circuit trigger
16 Mounting location/type FLUSH 65 Weld field immunity N/A At
17 Housing material METAL 66 Min ambient working temp -25 °C Max 70 °C
18 67 Minimum load current 0
19 SENSING ELEMENT 68 Contacts ac rating 3 At max
20 Sensing type MECHANICAL LIMIT SWITCH 69 Contacts dc rating N/A At max
21 Sensor style FORM D CONFORMING TO CENELEC EN 50041 70 Max leakage current 10 At
22 Switching frequency 100 HZ 71
23 Nom/max sensing distance 40 mm 72
24 Shielding style N/A 73
25 Barrel diameter N/A 74
26 Probe insertion length N/A 75
27 Mounting orientation HORIZONTAL 76
28 Casing material METAL 77
29 Active face material Zamak 78
30 79
31 80
32 SWITCH MECHANISM 81
33 Switch type Rotary head 82
34 Output signal type on-off 83
35 Digital communication std n/a 84 ACCESSORIES
36 Contact arrangement n/a Quantity 85 Mating connector N/R
37 Load switching style n/a 86 Mounting adaptor N/R
38 Integral indicator style n/a 87 Mounting bracket N/R
39 Signal termination type n/a 88 Magnetic actuator N/R
40 Cert/Approval type n/a 89
41 Field inmunity style n/a 90
42 Polarity protection n/a 91
43 False pulse protection n/a 92
44 Transient protection n/a 93
45 94 SPECIAL REQUIREMENTS
46 LEAD WIRE AND EXTENSION 95 Custom tag REQUIRED AS INDICATED ON ITEM 4
47 Extension type n/a 96 Reference specification MQCL-1000-IND-000-ESP-IN00-0006
48 Conductor nominal size n/a 97 Compilance standard IEC,IEEE,ISA
49 Cable lenght n/a 98
50 Connector configuration n/a 99
51 Signal termination type n/a 100
52 Cable jacket material n/a 101 PHYSICAL DATA
53 102 Estimated weigth 0.1 Kg
54 103 Overall width 40 mm
55 104 Overall lenght/height 77 mm
56 105 Overall depth 44 mm
57 106 Threaded length n/a mm
58 107 Signal conn nominal size Style
59 108 Mfr reference dwg 18
110 CALIBRATION AND TEST INPUT OR TEST OUTPUT OR SCALE
111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV LRV URV ACTION
112 Level-Analog Output 0 mm 22 mm 0 VAC 110 VAC
113 Level-Scale
114 Level setpoint 1-Output
115 Level setpoint 2-Output
116 Level setpoint 3-Output
117
118 COMPONENTS AND IDENTIFICATIONS
119 COMPONENT TYPE MANUFACTURER MODEL NUMBER
120 SWITCH DE POSICIÓN Telemecanique XC-J10559
121
122
123
124 NOTES
125 VTS = VENDOR TO SPECIFY
126 N/R = NOT REQUIRED
127
128 ALL PARTS MUST MUST SATISFY TECHNICAL SPECIFICATION AS INDICATED ON ITEM 96
129
130
131
132
133
134
135
136
137
138
139
REV REV DESCRIPTION DATE BY APP REMARKS PROJECT NUMBER

DQ-180229

DOCUMENT NUMBER
C EMITIDO PARA APROBACIÓN 19.01.19 GDC RDP INSTRUMENT DATA SHEET
B EMITIDO PARA APROBACIÓN 14.12.18 GDC RDP E30-000-IN-ME-DS-0001 PROXIMITY SENSOR
A EMITIDO PARA COORD. INT. 04.12.18 GDC RDP Device Specification
ISA FORM 20Z2012 REV 0
 1 GENERAL 6 GENERAL
2 Project Name PROYECTO SIERRA GORDA ESPESADORES 86M 7
3 Area Name AREA ESPESADOR DE COLAS 8 Location FIELD
4 TAG 5111-ZSL-61313 9 Area Class NON HAZARDOUS TYPE
5 Service LIMITE INFERIOR DE POSICIÓN DE RASTRA 10 P&ID DQ180229-G3817-T10-0250
11 SWITCH HOUSING 60 PERFORMANCE CHARACTERISTICS
12 Housing type Fixed 61 Min operating voltage 0 VAC Max 240 VAC
13 Construction style Rotary head 62 Repeatability <5% Ref
14 Nominal size 77 mm 63 Overload trigger
15 Enclosure type no/class NEMA 4X 64 Short circuit trigger
16 Mounting location/type FLUSH 65 Weld field immunity N/A At
17 Housing material METAL 66 Min ambient working temp -25 °C Max 70 °C
18 67 Minimum load current 0
19 SENSING ELEMENT 68 Contacts ac rating 3 At max
20 Sensing type MECHANICAL LIMIT SWITCH 69 Contacts dc rating N/A At max
21 Sensor style FORM D CONFORMING TO CENELEC EN 50041 70 Max leakage current 10 At
22 Switching frequency 100 HZ 71
23 Nom/max sensing distance 40 mm 72
24 Shielding style N/A 73
25 Barrel diameter N/A 74
26 Probe insertion length N/A 75
27 Mounting orientation HORIZONTAL 76
28 Casing material METAL 77
29 Active face material Zamak 78
30 79
31 80
32 SWITCH MECHANISM 81
33 Switch type Rotary head 82
34 Output signal type on-off 83
35 Digital communication std n/a 84 ACCESSORIES
36 Contact arrangement n/a Quantity 85 Mating connector N/R
37 Load switching style n/a 86 Mounting adaptor N/R
38 Integral indicator style n/a 87 Mounting bracket N/R
39 Signal termination type n/a 88 Magnetic actuator N/R
40 Cert/Approval type n/a 89
41 Field inmunity style n/a 90
42 Polarity protection n/a 91
43 False pulse protection n/a 92
44 Transient protection n/a 93
45 94 SPECIAL REQUIREMENTS
46 LEAD WIRE AND EXTENSION 95 Custom tag REQUIRED AS INDICATED ON ITEM 4
47 Extension type n/a 96 Reference specification MQCL-1000-IND-000-ESP-IN00-0006
48 Conductor nominal size n/a 97 Compilance standard IEC,IEEE,ISA
49 Cable lenght n/a 98
50 Connector configuration n/a 99
51 Signal termination type n/a 100
52 Cable jacket material n/a 101 PHYSICAL DATA
53 102 Estimated weigth 0.1 Kg
54 103 Overall width 40 mm
55 104 Overall lenght/height 77 mm
56 105 Overall depth 44 mm
57 106 Threaded length n/a mm
58 107 Signal conn nominal size Style
59 108 Mfr reference dwg 18
110 CALIBRATION AND TEST INPUT OR TEST OUTPUT OR SCALE
111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV LRV URV ACTION
112 Level-Analog Output 0 mm 22 mm 0 VAC 110 VAC
113 Level-Scale
114 Level setpoint 1-Output
115 Level setpoint 2-Output
116 Level setpoint 3-Output
117
118 COMPONENTS AND IDENTIFICATIONS
119 COMPONENT TYPE MANUFACTURER MODEL NUMBER
120 SWITCH DE POSICIÓN Telemecanique XC-J10559
121
122
123
124 NOTES
125 VTS = VENDOR TO SPECIFY
126 N/R = NOT REQUIRED
127
128 ALL PARTS MUST MUST SATISFY TECHNICAL SPECIFICATION AS INDICATED ON ITEM 96
129
130
131
132
133
134
135
136
137
138
139
REV REV DESCRIPTION DATE BY APP REMARKS PROJECT NUMBER

DQ-180229

DOCUMENT NUMBER
C EMITIDO PARA APROBACIÓN 19.01.19 GDC RDP INSTRUMENT DATA SHEET
B EMITIDO PARA APROBACIÓN 14.12.18 GDC RDP E30-000-IN-ME-DS-0001 PROXIMITY SENSOR
A EMITIDO PARA COORD. INT. 04.12.18 GDC RDP Device Specification
ISA FORM 20Z2012 REV 0