Signet 8850 Conductivity Transmitters

Features
Member of the ProcessPro® Family of Transmitters • Meets USP require-
ments for raw
conductivity
measurements

• Display choices of μS,

mS, KΩ, MΩ, PPM
(TDS)

• Simulate function

• Programmable
temperature
compensation

• Relay and open

collector options
Panel Mount Pipe, Tank, Wall and Integral Mount
• Dual output option
allows temperature
and process signal
transmission
Description
The Signet 8850 Conductivity relays, or the 8850-3 with two-wire • NEMA 4X/IP65
Transmitter is designed for multiple current loop, one sensor input signal enclosure with self-
installation options, simple set-up and two current loop outputs. healing window
and easy operation, thus satisfying The 8850 is offered with a NEMA 4X/
a broad range of application IP65 front panel with a self-healing • Compatible with ALL
requirements. window in a convenient 1/4 DIN Signet conductivity
package for easy mounting. The 8850 electrodes
Full microprocessor based can be configured via a simple menu
electronics allow for a wide operating system.
range and long term signal stability in Application
three different instrument versions: In addition to programmable outputs • RO/DI System Control
the 8850-1 for a traditional two-wire and relays, the unit can also be set up • Rinse Tank Control
current loop, the 8850-2 features to measure raw conductivity values, • Cooling Tower,
current loop plus two dry contact hence meeting USP requirements. Scrubber or
Blowdown Control
• Environmental
System Overview Study (TDS)
• Desalination Monitor
In-line Sensor Installation Submersible Sensor Installation • Water Quality
Monitoring
• Leak Detection
Panel Mount Pipe, Tank, Wall Mount Integral Mount Panel, Pipe, Tank, Wall Mount
Signet 8850 Signet 8850 Signet 8850
Conductivity
Instrument
Conductivity
Instrument
Conductivity
Instrument • Chemical
Concentration
Signet 8850 Conductivity Instrument
Signet Universal Signet Integral
Adapter Kit (3-8050) Adapter Kit (3-8052) Pipe extension C US
(sold separately) (sold separately) or conduit
with 3/4 in. E171559
FNPT threads
Signet Conductivity Electrode (customer supplied)
(sold separately)
Signet Conductivity
Electrode
(sold separately)

3/4 in. NPT Fittings - Customer supplied

Note: Submersible installation not applicable

for Sanitary Conductivity Electrode.

126 www.gfsignet.com
Dimensions Specifications

Choosing
Products
3-8850-XP Panel Mount General Electrical (continued)
96 mm (3.8 in.)
Compatible electrodes: Current output:
All Signet conductivity electrodes • 4 to 20 mA, isolated, passive, fully
Accuracy: ±2% of reading adjustable and reversible
Display: • Max loop impedance:

Instrument
96 mm

Multi-Pa-
• Alphanumeric 2 x 16 LCD 50Ω max. @ 12 V,

rameter
(3.8 in.)
• Contrast: User selected, 5 levels 325Ω max. @ 18 V,
• Update rate: 1.8 seconds 600Ω max. @ 24 V
Materials • Update rate: 200 ms
• Case: PBT • Accuracy: ±0.03 mA @ 25°C, 24 V
• Panel case gasket: Neoprene Relay output:

Flow
• Window: • Mechanical SPDT contacts: Hi, Lo,
Optional 92 mm
Splashproof (3.6 in.)
Polyurethane coated polycarbonate Pulse, Off
Rear Cover • Keypad: Sealed 4-key silicone rubber • Maximum voltage rating:

pH/ORP
Electrical 5A @ 30 VDC, or 5A @ 250 VAC
Power: resistive load
41 mm
56 mm
(2.2 in.) • 12 to 24 VDC ±10% regulated • Hysteresis: User Adjustable
(1.6 in.)
97 mm (-1) 21 mA max., (-2) 220 mA max., • Max 400 pulses/min.

Conductivity/ Temperature,
(3.8 in.)
(-3) 60mA max. Environmental

Resistivity
Field version with universal Sensor input range: Enclosure Rating: NEMA 4X/IP65 front
mounting kit. • Conductance: 0.055 to 400,000 μS/cm Operating temperature:
• Resistivity: 10KΩ•cm to 18.2MΩ•cm -10°C to 70°C (14°F to 158°F)
• TDS: 0.023 to 200,000 ppm Storage temperature:
82 mm • Temperature: -15°C to 80°C (5°F to 176°F)

Pressure, Level
(3.23 in.)
PT 1000, -25°C to 120°C (-13°F to 248°F) Relative humidity:
Open-collector output: Hi, Lo, Pulse, Off 0 to 95%, non-condensing
• Open-collector, optically isolated, 50mA Shipping Weight: 0.6 kg (1.32 lb.)
106 mm
(4.18 in.) max, sink, 30 VDC max. with pull-up
41 mm
resistor. Standards and Approvals
(1.6 in.) • Hysteresis: User Adjustable • CE, UL listed
• Max 400 pulses/min. • Manufactured under ISO 9001: 2000
for Quality and ISO 14001:2004 for

Products
Other
Model 8850 Environmental Management
Ordering Notes:
Ordering Information
1) Instruments can be mount- Instrument Part Number
ed directly to a sensor by 3-8850 Conductivity Transmitter

Installation
choosing the following: Select the model suited to the application

Wiring &
• Order integral adapter kit -1 One input with 4 to 20 mA output and one open collector; uses 4-wire power
3-8052 (sold separately) to
-2 One input with 4 to 20mA output and two relays; uses 4-wire power
connect the sensor to an
instrument. -3 One input with two 4 to 20mA outputs and 2 open collectors; uses 4-wire power
• The following sensor part Field or panel mount- choose one
numbers can be used for

Reference
- Integral mount package

Technical Temperature/ Glossary Part No.

integral mounting: P Panel mount package
3-2819-1, 3-2820-1,
3-2821-1, 3-2822-1 (with
3-2820.390), and 3-2823-1. 3-8850 -2 P Example Part Number
2) Use the universal mount
kit (3-8050) with the field Mfr. Part No. Code Mfr. Part No. Code
mount instrument to 3-8850-1 159 000 228 3-8850-2P 159 000 231 Pressure
Graphs
mount to a pipe, tank or 3-8850-1P 159 000 229 3-8850-3 159 000 232
wall. 3-8850-2 159 000 230 3-8850-3P 159 000 233
3) To mount the panel version
to a wall, use the heavy Accessories and Replacement Parts
duty wall mount bracket Mfr. Part No. Code Description
of Terms Reference Index

4) Order RC filter kits to Mounting

protect relays from voltage 3-8050 159 000 184 Universal mounting kit
spikes. 3-8050.395 159 000 186 Splashproof rear cover
3-8052 159 000 188 3/4 in. Integral mounting kit
3-8052-1 159 000 755 3/4 in. NPT mount junction box
3-0000.596 159 000 641 Heavy duty wall mount bracket (for panel mount only)
3-5000.598 198 840 225 Surface Mount Bracket
Please refer to Wiring, 3-8050.392 159 000 640 Model 200 retrofit adapter
Liquid Tight Connectors
Installation and 3-9000.392 159 000 368 Liquid-tight connector kit for rear cover (3 connectors)
Accessories sections 3-9000.392-1 159 000 839 Liquid-tight connector (1 set), NPT
for more information. 3-9000.392-2 159 000 841 Liquid-tight connector (1 set), PG 13.5
Other
3-8050.396 159 000 617 RC Filter kit (for relay use), 2 per kit
www.gfsignet.com 127