100% found this document useful (1 vote)
3K views1 page

E34 Low To High Kombi Cluster Conversion Manual

This document provides instructions for converting a low kombi instrument cluster to a high kombi cluster for a BMW E34. It details the connector and pin mappings needed to connect the wiring harnesses. Additional steps are described to access auxiliary information from other modules like the on-board computer and radio on the high kombi cluster. Disconnecting the battery is advised before removing the instrument cluster.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
3K views1 page

E34 Low To High Kombi Cluster Conversion Manual

This document provides instructions for converting a low kombi instrument cluster to a high kombi cluster for a BMW E34. It details the connector and pin mappings needed to connect the wiring harnesses. Additional steps are described to access auxiliary information from other modules like the on-board computer and radio on the high kombi cluster. Disconnecting the battery is advised before removing the instrument cluster.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Low to High Kombi instrument cluster conversion manual

For BMW E34.


Use this manual at your own risk. Disconnect battery and wait for 1 minute before deattaching cluster!
Low kombi clusters have: 516, 518, 520 and diesels: 524td, 525td, 525tds.
Note when taking a high kombi cluster from another car, it may be necessary to reprogram or change coding plug that has car and engine-related information.

Instrument cluster connectors


LOW KOMBI HIGH KOMBI
X16 26-pin, beige (or yellow) X16 26-pin, beige
X507 14-pin, black X17 12-pin, (brown)
X13060 26-pin, white (or blue) X271 12-pin, gray
X502 26-pin, white

LOW KOMBI HIGH KOMBI

X16 connector / pin to connector / pin


TxD diagnosis line Diagnostic connector X16 / 1 X17 / 14 TxD
ABS indicator lamp ABS control unit X16 / 2 X16 / 20 ABS indicator control
Brake fluid level Brake fluid level switch X16 / 3 X16 / 15 Brake fluid warning
Coolant temperature sensor Remote thermometer sensor X16 / 4 X16 / 26 Temperature gauge signal
Oil pressure signal Oil pressure switch X16 / 5 X16 / 6 Oil pressure indicator control
Preheating, diesel DDE control unit X16 / 7 X16 / 8 ASC
SIA-Reset Diagnostic connector X16 / 8 X16 / 16 SIA reset
Charge indicator lamp, terminal 61 Unloader relay X16 / 9 X16 / 5 Charge indicator control
Start clear diesel DDE control unit X16 / 10 N/A
RxD diagnosis line Diagnostic connector X16 / 12 X17 / 2 RxD diagnosis
Airbag indicator lamp Airbag diagnostic module X16 / 14 X16 / 1 Airbag
Ignition lock Ignition switch X16 / 15 N/A
Terminal 15 Fuse X16 / 16 X16 / 7 Terminal 15 power Fuse
Terminal R for airbag indicator lamp Ignition switch X16 / 17 X16 / 21 Airbag indicator power
Ground Ground connection X16 / 18 X17 / 1;13 Ground
ti signal DME/DDE control unit X16 / 20 X16 / 17 Ti signal for fuel economy
Terminal 30 Fuse X16 / 21 X16 / 12;13 Terminal 30 power
Terminal R Fuse X16 / 22 X17 / 3;15 Terminal R power
Main beam indicator lamp Direction switch X16 / 23 X16 / 22 High beam indicator power
Turn signal indicator lamp for trailer Hazard warning relay X16 / 24 X16 / 11 Trailer turn signal indicator
Terminal 15 Fuse X16 / 25 N/A
TD signal DME/DDE control unit X16 / 26 X16 / 18 TD signal for tachometer

X13060
Instrument cluster lights Light switch X13060 / 1 X502 / 14 Instrument illumination power
Position pulse Rear axle reed contact X13060 / 2 X271 / 10 Vehicle speed input (-)
Fuel reserve lamp Fuel level sending unit X13060 / 3 X271 / 2 Fuel level warning signal
Position pulse DWA DWA module X13060 / 5 N/A
Indicator lamp, rear fog light Fog light switch X13060 / 7 X502 / 15 Fog light indicator control LCM
Indicator lamp, front fog lamp Fog light switch X13060 / 8 X502 / 1 Fog light indicator control LCM
Brake pad wear indicator Front left brake pad sensor X13060 / 9 X16 / 25 Brake pad warning
Brake pad wear indicator Rear right brake pad sensor X13060 / 10 X16 / 10 (not sure if used)
Ground Ground connection X13060 / 11 X16 / 24 Temperature sensor ground
Tacho A signal Control units X13060 / 12 X502 / 18 Vehicle speed signal output
Position pulse Rear axle reed contact X13060 / 13 X271 / 8 Vehicle speed input (+)
Fuel gauge Fuel level sending unit X13060 / 14 X271 / 4 Fuel level signal
Connecting line Instrument cluster X13060 / 15 N/A
Right turn signal indicator Hazard warning relay X13060 / 19 X502 / 26 Right turn indicator control
Left turn signal indicator Hazard warning relay X13060 / 20 X502 / 25 Left turn indicator control
Handbrake indicator lamp Handbrake switch X13060 / 24 X271 / 7 Park brake indicator control
Gong signal Gong X13060 / 26 X502 / 2 Sound tone signal

X507
EGS program indicator EGS control unit X507 / 1
EGS program indicator EGS control unit X507 / 2
Automatic gear indicator Selector lever switch X507 / 3
Automatic gear indicator Selector lever switch X507 / 4
Automatic gear indicator Selector lever switch X507 / 5
Automatic gear indicator Selector lever switch X507 / 6
Terminal 15 Fuse X507 / 8
Connecting line Instrument cluster X507 / 10
Automatic signal EGS control unit X507 / 13
Ground Ground connection X507 / 14

To get auxiliary information to show up on high kombi instrument cluster, connect these:
Info from OBC:
connector / pin to Pin at the back of the OBC Description
X16 / 23 2 Data line CCM Comp
X502 / 23 14 Check control reset signal Comp
X16 / 3 15 CCM LCM Comp

Info from radio:


connector / pin to Pin at the back of the radio Description
X16 / 3 17 LAC (wire white/brown)
X16 / 23 7 DAC (wire blue/brown/yellow)

dec.2010

You might also like