0% found this document useful (0 votes)
307 views3 pages

Artclean CW

This document provides a material safety data sheet for Artclean CW, a neutral liquid cleaner for cleaning and degreasing. It contains non-ionic surfactants, organic corrosion inhibitors, formaldehyde donors, defoamers, and water. It has a pH of 9.5-10.5 and is an amber colored, homogeneous liquid. Artclean CW is non-toxic and non-hazardous with no flash point or flammable limits. It may cause eye irritation but is not hazardous through inhalation or skin contact. Proper precautions like gloves, goggles, and ventilation should be used. The product is completely biodegradable and safe for disposal after dilution with
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
307 views3 pages

Artclean CW

This document provides a material safety data sheet for Artclean CW, a neutral liquid cleaner for cleaning and degreasing. It contains non-ionic surfactants, organic corrosion inhibitors, formaldehyde donors, defoamers, and water. It has a pH of 9.5-10.5 and is an amber colored, homogeneous liquid. Artclean CW is non-toxic and non-hazardous with no flash point or flammable limits. It may cause eye irritation but is not hazardous through inhalation or skin contact. Proper precautions like gloves, goggles, and ventilation should be used. The product is completely biodegradable and safe for disposal after dilution with
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

1

MATERIAL SAFETY DATA SHEET FOR ARTCLEAN CW


I. PRODUCT IDENTIFICATION :

1. Manufacturers Name: ALOK CHEMICALS PRIVATE LIMITED


2. Address:
Works: EL-25/5 MIDC, Bhosari, Pune: 411026
3. Regular Telephone Number : TEL: (020) 27121859 TELEFAX: (020) 27121860
4. Emergency Telephone Number : 9822026894 / 9371161741
5. Trade Name: ARTCLEAN CW.
6. Synonyms: Neutral Liquid Cleaner – for cleaning & degreasing.

II. PRODUCT INGREDIENTS : TOXICITY DATA

1. Non Ionic Surfactant : Min. 40% NON TOXIC CHEMICALS USED


2. Organic Corrosion inhibitor : Min. 10% Organic Amine Borate – Non Toxic
3. Formaldehyde Donor Biocide : Min. 5%
4. Defoamer : Min. 10%
5. Water : QS

III. PHYSICAL DATA :

1. Boiling point 760 mm Hg : Min. 100 0C


2. Specific Gravity (H2O – 1) : 1.02
3. Vapour Density (Air – 1) : NA
4. Percent Volatiles by Volume : NA
5. Melting Point : NA
6. Vapour Pressure : NA
7. Solubility in water : All Proportions
8. Evaporation Rate (Butyl Acetate – 1) : NA
9. Appearance & Odour : Amber colored liquid with typical odour
10. Physical State : Homogeneous Liquid + Top layer of Defoamer
11. pH 2% aqueous : 9.5-10.5
12. Shelf Life : 1 Year.

IV. FIRE AND EXPLOSION DATA :

1. Flash Point (Test Method) : Nil


2. Auto-ignition Temperature : > 400 0C
3. Flammable Limits in Air % by vol. : Nil
4. Extinguishing Media : NA
5. Special Fire Fighting Procedures : NA
6. Unusual Fire & explosion hazard : NA

V. HEALTH HAZARD INFORMATION :

ROUTES OF EXPOSURE :
1. Inhalation : Non Hazardous
2. Skin Contact : Non Hazardous
3. Skin adsorption : Not reported
4. Eye Contact : Irritant, Safety of safety-goggles recommended
5. Ingestion : Remote chances – Induce vomiting
2

EFFECTS OF OVER EXPOSURE :


1. Acute Over Exposure : None
2. Chronic Over-Exposure : None

EMERGENCY AND FIRST AID PROCEDURES :


1. Eyes : Wash with plenty of water
2. Skin : Wash with plenty of water
3. Ingestion : Call physician

NOTES TO PHYSICIAN :
The bacteriostat used for avoiding bacterial growth is a formaldehyde donor. So, in case of ingestion, it
should be treated as ingestion of formaldehyde.

VI. REACTIVITY DATA :

1. Conditions contributing to instability : None


2. Incompatibility : Compatible with most systems.
3. Hazardous Decomposition Products : None
4. Conditions contributing to hazardous : None
Polymerization

VII. SPILL OR LEAK PROCEDURES :

STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED:


Wash with water to remove spillage.

NEUTRALIZING CHEMICALS :
Dil. HCl or Acetic Acid.

WASTE DISPOSAL METHOD :


Dilute with fresh water after removal of oil/grease/grime/carbon.

VIII. SPECIAL PROTECTION INFORMATION:

1. Ventilation requirements : Normal ventilation sufficient.


2. Specific personal protective equipment : Normal ware like Boiler Suit / Apron.
3. Respiratory : None.
4. Gloves : Hand gloves of rubber or PVC.
5. Eye : Safety goggles.
6. Other clothing & equipment : Facemask for inhalation, and Safety shoes.

IX. SPECIAL PRECAUTIONS :

1. Precautionary statements :
Keep away from direct heat, Naked flame, Concentrated acids (HCl, H2SO4, HNO3 etc.), Known
Toxicants, Carcinogens, Radioactive Material, Direct sunlight.
2. Other Handling and storage requirements :
Use hand gloves and other protective wares while using, diluting, and discarding. Use of hand gloves
recommended for people with hypersensitive skin. Storage as above.

X. METHOD OF DISPOSAL :

1. Alkalinity is due to Organic Amines. The end decomposition products are CO2, H2O,
Ammonia/Nitrogen, Methane.
3

2. Being completely Bio-Degradable – prior storage of washing liquid for 2 weeks before disposal will
give best results.
3. When diluted liquid is not used for 15 days, the bacterial growth is of SRB, gram –ve & gram +ve
bacteria.

PREPARED BY :
ALOK CHEMICALS PVT. LTD
ADDRESS :
EL-25/5 MIDC, Bhosari, Pune: 411026 TEL: (020) 27121859 TELEFAX: (020) 27121860
DATE :
April 3, 2007

You might also like