0% found this document useful (0 votes)
171 views1 page

MSDS Power Cream

This document provides a material safety data sheet for a multipurpose cream cleanser called Power Cream. It lists the product's ingredients such as water, magnesium silicate, and sodium hydroxide. It also describes the product's physical properties including its white cream appearance and slightly basic pH. The document outlines health hazards like eye and skin irritation and recommends protective equipment. It instructs users to wash with soap and water in case of skin exposure and rinse eyes with water for at least 15 minutes if the product gets in the eyes.

Uploaded by

lucky textile3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
171 views1 page

MSDS Power Cream

This document provides a material safety data sheet for a multipurpose cream cleanser called Power Cream. It lists the product's ingredients such as water, magnesium silicate, and sodium hydroxide. It also describes the product's physical properties including its white cream appearance and slightly basic pH. The document outlines health hazards like eye and skin irritation and recommends protective equipment. It instructs users to wash with soap and water in case of skin exposure and rinse eyes with water for at least 15 minutes if the product gets in the eyes.

Uploaded by

lucky textile3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PT.

ARJUNA MINERAL MATERIAL SAFETY DATA SHEET

POWER CREAM
SECTION 1 - PRODUCT IDENTIFICATION
Product Name : POWER CREAM
Description : Multipurpose Cream Cleanser
Date of MSDS : Feb 04th, 2022

SECTION 2 – INGREDIENT INFORMATION


Chemical Name/Common Name % Chemical Name/Common Name %
Demineralized water 50—60 Nonylphenol Ethoxylates 1—2
Magnesium Silicate 0.5—0.6 Octadecenoic acid 0.5—1
Aluminium Oxide 10—20 Sodium DodecylbenzeneSulfonate 1—7
Sodium Hydroxide 1—2 Ethyl alcohol 1—3
PEG-7 Glyceryl Cocoate 0.1—0.3

SECTION 3 - PHYSICAL DATA


Color/Appearance/Odor : White/Cream/Floral Solubility in Water : Low
Boiling Point :  100 o C Specific Gravity : 1.20 ± 0.05 g/mL
Vapor Pressure : Not determined Viscosity (Ford Cup No.4) : 1559.0 ± 0.05 sec.
Vapor Density : Not determined pH : 2.5 ± 0.5

SECTION 4 - FIRE AND EXPLOSION HAZARD DATA


Flash Point (T.C.C.) : Not Applicable.
Flammable Limits - : Not Applicable.
Extinguishing Media : Not Applicable.
Special Fire Fighting Procedure : Extinguish with water spray or carbon dioxide, dry chemical powder or appropriate foam.
Normal fire fighting procedure may be used.
Unusual Fire/Explosion Hazards : None known.

SECTION 5 - REACTIVITY DATA


Stability : Stable.
Hazardous Decomposition Products : Burning can produce carbon dioxide and carbon monoxide.
Incompatibility : Strong acid and oxidizer.
SECTION 6 - HEALTH HAZARD DATA
Primary Routes of Exposure : Skin and Eyes
Symptoms of Over-Exposure : Prolonged or repeated contact with concentrated product may cause irritation and reddening
(eyes). Ingestion may cause nausea / vomiting, diarrhea, and irritation. Inhalation may cause
dizziness, drowsiness, and irritation to the respiratory tract.
SECTION 7 - EMERGENCY AND FIRST AID PROCEDURES
Eyes : Flush with cool water for at least 15 minutes and consult a physician immediately.
Skin : Wash with large amounts of soap and water. If irritation persists, consult a physician.
Ingestion : Do not induce vomiting. Dilute by drinking water. Call a physician immediately.
Inhalation : Move to an area fresh air.
SECTION 8 - SPECIAL PROTECTION INFORMATION
Respiratory Protection : Normally not required.
Ventilation Requirements : Normal ventilation sufficient.
Eye Protection : Safety glasses / goggles.
Hand Protection : Rubber / PVC Gloves.
Other Protective Clothing : Normal work clothing covering arms and legs.
SECTION 9 - SPILL OR LEAKAGE PROCEDURES
Steps to be Taken : Stop spill at source. Prevent run off. Mop, shovel, pump and/or absorb with inert material and
place in sound containers. Rinse remaining residue with excess water.
Material Disposal : Dispose off in an approved waste facility according to local regulation.
SECTION 10 - STORAGE AND HANDLING INFORMATION
Precautions: Keep container closed to prevent contamination. Store away from direct heat and out of reach of children.
No special storage / handling requirements if product is handled according to good manufacturing practices.

NOTICE: MSDS is correct at date of publication. It is not necessarily fully adequate for every circumstance, nor to be confused with or followed in violation of applicable
laws or insurance requirements. Health hazards and effects of over-exposure apply only to negligent handling or misuse of product in its concentrated form (as supplied)
and not routine exposure to diluted product under normal use. No warranty, express or implied, of merchantability, fitness or accuracy of data is made; as such the vendor
assumes no responsibility for injury or damages resulting from use of this product
.

Doc.MSDS_AM/Smrg/2022

You might also like