Twin Disc Marine Transmission MG-5050 Series
Maximum 272 kW (365 hp) @2800 RPM (PLEASURE CRAFT)
STANDARD EQUIPMENT
MG-5050SC
Vertical offset, cast iron housing
Mechanical control valve
Oil strainer
MG-5050A
Vertical offset, cast iron housing
10° down angle on output shaft
Mechanical control valve
Oil strainer
MG-5050RV
Vertical offset, cast iron housing
10° down angle on output flange
Input flange
Mechanical control valve
Oil strainer
INPUT RATINGS - KILOWATS (KW) (HORSEPOWER (HP))*
For service classification definitions and important notes refer to www.twindisc.com, the Twin Disc Marine Product
Guide or contact Twin Disc directly.
Reduction Ratios Pleasure Light Intermediate Medium Continuous
:1 Craft Duty Duty Duty Duty
@ 2800 RPM @ 2800 RPM @ 2500 RPM @ 2100 RPM @ 2100 RPM
MG-5050SC
1.00, 1.11, 1.23, 272 kW 254 kW
1.53, 1.71, 2.04 (365 hp) (341 hp) 187 kW 128 kW 116 kW
261 kW 223 kW (251 hp) (172 hp) (156 hp)
2.45
(350 hp) (299 hp)
231 kW 216 kW 170 kW 119 kW 108 kW
3.00
(310 hp) (290 hp) (228 hp) (160 hp) (145 hp)
MG-5050A & MG-5050RV
Reduction Ratios Pleasure Light Intermediate Medium Continuous
:1 Craft Duty Duty Duty Duty
@ 2800 RPM @ 2800 RPM @ 2500 RPM @ 2100 RPM @ 2100 RPM
1.12, 1.25, 1.50, 272 kW 254 kW
1.80, 2.04 (365 hp) (341 hp) 187 kW 128 kW 116 kW
239 kW 223 kW (251 hp) (172 hp) (156 hp)
2.50
(320 hp) (299 hp)
* Ratings shown for use with standard right-hand rotation engines.
The maximum allowable rated engine speed is 3300 rpm (5500 rpm in high speed configuration).
Specifications subject to change without prior notice in the interest of continual product improvement.
Contact your local Twin Disc representative for engineering specifications, Survey Society Approvals
and Classifications.
Scan QR code to see Twin Disc‘s entire Marine product line.
For nearly a century, we’ve been making
boats perform better and more reliably.
OPTIONS MG-5050SC MG-5050A MG-5050RV From system-design consultation to
SAE J617 no. 2 to SAE J617 no. 1 housing adaptor X X application development to in-service
SAE J617 housing no. 2 X X support, Twin Disc provides fully
SAE J617 housing no. 3 X X integrated propulsion solutions that will
SAE J617 housing no. 4 X X optimize your craft’s performance,
Borg Warner housing X X
reliability and safety over the years.
Flexible coupling for 14” flywheel (SAE J620 size 355) X X
Bring Twin Disc aboard early in the
Flexible coupling for 11.5” flywheel (SAE J620 size 290) X X
development process, and you’ll enjoy
Flexible coupling for 10” flywheel (SAE J620 size 255) X X
a lifetime of enhanced operating value.
Input flange for freestanding installation standard
High speed configuration (3300-5500 rpm) X X X
TRANSMISSIONS • ELECTRONIC CONTROLS •
Electric control valve (12VDC or 24 VDC) X X
EXPRESS JOYSTICK SYSTEM • SAILDRIVES •
®
Mechanical trolling valve X X X
EXPRESS POSITIONING • ARNESON SURFACE
®
Oil cooler X X X
DRIVES • MARINE CONTROL DRIVES •
Companion flange/bolts set X X X ROLLA PROPELLERS • BOW & STERN
Monitoring devices to customer’s specification X X X THRUSTERS • STEERING SYSTEMS •
Mounting brackets X X X RUDDERS • TRIM TABS
Live PTO:
SAE J744 size 82-2, 16-4 (SAE “B”, 2-bolt, max. 35 Nm) X X
SAE J744 size 101-2/4, 22-4 (SAE “B”, 2/4-bolt, max. 197 Nm) X X
Dry weight incl. SAE #3 housing and SAE 290
flexible coupling 91 kg 91 kg 85 kg
MG-5050SC C 134 mm (5.28”)
S 119 mm (4.69”)
F 325 mm (12.78”)
L 207 mm (8.13”)
R 149 mm (5.85”)
MG-5050A C 140 mm (5.52”)
S 93 mm (3.68”)
F 307 mm (12.10”)
L 207 mm (8.13”)
R 149 mm (5.85”)
A 10°
MG-5050RV C 140 mm (5.52”)
S 93 mm (3.68”)
F 78 mm (3.06”)
F1 257 mm (10.13”)
L 207 mm (8.13”)
R 149 mm (5.85”)
A 10°
Twin Disc, Incorporated
Racine, Wisconsin 53403 USA
Twin Disc, Incorporated reminds users of these products that their safe operation depends on use in compliance Phone +1-262-638-4000
with engineering information provided in our catalog. Users are also reminded that safe operation depends Fax +1-262-638-4482
on proper installation, operation and routine maintenance and inspection under prevailing conditions. It is the www.twindisc.com
responsibility of users (and not Twin Disc, Incorporated) to provide and install guards or safety devices which
may be required by recognized safety standards or by the Occupational Safety and Health Act of 1970 and its
subsequent provisions. TD-Bulletin-MG-5050_Series
© 2016, Twin Disc, Incorporated
United States of America • Australia • Belgium • Canada • China • India • Italy • Singapore • Switzerland Printed in the USA - 1/2016
