Scribd
Upload
125 views2 pages

EP 31328 Tds

EnerPlastics provides technical information for its pink masterbatch product EP-31328. The product has a base resin of polyethylene, additives including antioxidants and dispersing agents, and can withstand temperatures up to 220°C. It is designed for use in PE/PP injection, blow molding, and extrusion applications. The recommended loading rate is between 1-4% depending on the final application.

Uploaded by

Thamim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
125 views2 pages

EP 31328 Tds

EnerPlastics provides technical information for its pink masterbatch product EP-31328. The product has a base resin of polyethylene, additives including antioxidants and dispersing agents, and can withstand temperatures up to 220°C. It is designed for use in PE/PP injection, blow molding, and extrusion applications. The recommended loading rate is between 1-4% depending on the final application.

Uploaded by

Thamim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

EnerPlastics LLC

Masterbatch

DATE: 29/08/2022

EP-31328
Pink Masterbatch

Technical Information
PROPERTY VALUE
Base Resin Polyethylene
Additives Blend of Antioxidants and Dispersing Agent
Heat Resistance 2200C
Light Fastness 3-4
Moisture Content 0.10% MAX (EP Standard)
Pellet Shape Cylindrical
Food Contact Approval APPROVED

Tests are performed according to EnerPlastics’ test methods based on International Standards.

Application
EP-31328 is designed to fulfil the technical requirements of Pink Masterbatch suitable for
PE/PP injection, blow molding and extrusion applications.

Disclaimer: The level of light fastness declared covers only the resistance of the color MB to
fading when exposed to light. It doesn’t include other environmental factors that may affect the
color properties in the final product

Dosing Rate (Recommendations)


The recommended Let down Ratio is between 1 - 4 %, depending upon the final application.

Processing Condition
Normal Processing

Storage & Packaging


Keep bags stored in a dry and cool place below 35°C, protected from sunlight & tightly closed
to avoid contamination. A shelf life in these conditions may exceed 12months.
The MasterBatch is packed in special 25kg UV stabilized-Laminated PP bags with PE liners.
Opening and dosing of the Masterbatch can be done without damaging the bag by just
removing the topstitching.

The information and recommendations contained in this Product Information are based upon data collected by EnerPlastics and are believed to be
correct. However, no warranty of fitness for use or any other guarantee or warrantee of any kind, express implied, is made with respect to the
information contained herein, and EnerPlastics assumes no responsibility for the results of the use of products and processes described herein.

P.O. Box 37561 Dubai, UAE, Tel: +971 4 880 2955, Fax: +971 4 880 2966, Email: [email protected], www.enerplastics .com
EnerPlastics LLC

Masterbatch

Food Packaging Status


EP-31328 can be used for food contact applications as all the ingredients used meet the European
Regulations.
General Statement

This information applies to the material as produced in our production facilities and does not cover
any additive, pigment and other material subsequently added by the buyer (or a third party).

This declaration replaces all previous ones relating to this subject matter and is, unless revoked in
writing, valid for a period of 1 (one year) as of the date of issuance, after which it will automatically
expire.

The information and recommendations contained in this Product Information are based upon data collected by EnerPlastics and are believed to be
correct. However, no warranty of fitness for use or any other guarantee or warrantee of any kind, express implied, is made with respect to the
information contained herein, and EnerPlastics assumes no responsibility for the results of the use of products and processes described herein.

P.O. Box 37561 Dubai, UAE, Tel: +971 4 880 2955, Fax: +971 4 880 2966, Email: [email protected], www.enerplastics .com

You might also like