Radial Insert Ball Bearings
Mounted Units
Recommended Combinations
Technical Product Information TPI 106
TPI 106 USA USA.book Seite 1 Dienstag, 20. Februar 2001 7:59 07
Radial Insert Ball Bearings, Combined with Cast Iron Housings –
GG ASE GG SAO GG SHE GG LCTE GG GLCTE
d = 12 to 120 d = 30 to 100 d = 12 to 60 d = 12 to 40 d = 12 to 40
Heavy series Without
lubrication hole
RAE..NPPB FLCTE
d = 12 to 50 d = 12 to 40
(excluding 45)
Without lubrication holes
GRAE..NPPB PASE PSHE GLCTE
d = 12 to 60 d = 12 to 60 d = 12 to 60 d = 12 to 40
GE..KRRB RASE RSHE
d = 17 to 120 d = 17 to 120 d = 17 to 60
GNE..KRRB RSAO
d = 30 to 100 d = 30 to 100
Heavy series
GE..KPPB-3 TASE TSHE
d = 20 to 80 d = 20 to 80 d = 20 to 60
With triple-lip seals
GE..KLLHB LASE LSHE
d = 20 to 50 d = 20 to 50 Diameters
With labyrinth seals available
on request
GLE..KRRB RASEL
d = 20 to 70 d = 20 to 70
Non-locating bearings
GSH..RRB RASEA RSHEA
d = 20 to 50 d = 20 to 40 Diameters
Bearings with available
adapter sleeves on request
AY..NPPB FLCTEY
d = 12 to 30 d = 12 to 30
Without lubrication holes
GAY..NPPB PASEY PSHEY FLCTEY GLCTEY
d = 12 to 60 d = 12 to 60 d = 12 to 60 d = 35 to 40 Diameters
available
on request
GYE..KRRB RASEY RSHEY
d = 12 to 90 d = 12 to 90 d = 15 to 60
Recommended Combinations
The other designations indicate alternative combinations. Please contact INA for details.
TPI 106 USA USA.book Seite 1 Dienstag, 20. Februar 2001 7:59 07
Recommended Combinations
GG CJT GG CJTZ GG CFT GG ME GG MEO GG FE GG CJ GG CJO GG CF
d = 12 to 75 d = 20 to 60 d = 12 to 50 d = 20 to 120 d = 30 to 100 d = 25 to 60 d = 12 to 120 d = 30 to 100 d = 20 to 50
With Lower section Heavy series Heavy series Lower section
centering pilot height than height than
CJT CJT
PCJT PCFT PME PCJ PCF
d = 12 to 60 d = 12 to 50 d = 20 to 60 d = 12 to 60 d = 20 to 50
RCJT RCJTZ RME RFE RCJ
d = 17 to 75 d = 20 to 60 d = 20 to 120 d = 25 to 60 d = 17 to 120
RMEO RCJO
d = 30 to 100 d = 30 to 100
TCJT TME TFE TCJ
d = 20 to 75 d = 20 to 80 d = 25 to 60 d = 20 to 80
LCJT LME
d = 20 to 50 Diameters
available
on request
RCJTL RMEL RCJL
Diameters Diameters d = 30 to 70
available available on
on request request
RCJTA RMEA RCJA
d = 20 to 40 Diameters Diameters
available available
on request on request
PCJTY PCFTY PMEY PCJY
d = 12 to 60 Diameters d = 20 to 60 d = 12 to 60
available
on request
RCJTY RMEY RCJY
d = 12 to 75 d = 20 to 90 d = 12 to 90
TPI 106 USA USA.book Seite 1 Dienstag, 20. Februar 2001 7:59 07
GG CFTR GG TUE GG TUEO HUSE GG HE GG SFT
HUE
d = 12 to 50 d = 20 to 120 d = 80 to 100 d = 20 to 50 d = 20 to 35
Heavy series d = 20 to 50
PCFTR PTUE PHUSE PHE PSFT
d = 12 to 50 d = 20 to 60 d = 25 to 50 d = 20 to 50 d = 20 to 35
RTUE RHE
d = 20 to 120 d = 20 to 50
RTUEO
d = 80 to 100
TTUE THE
d = 20 to 80 d = 20 to 50
RTUEL
Diameters
available
on request
PTUEY PHEY
d = 20 to 60 d = 20 to 45
RTUEY
d = 20 to 80
TPI 106 USA USA.book Seite 1 Dienstag, 20. Februar 2001 7:59 07
Radial Insert Ball Bearings,
Combined with Sheet Steel Housings
GEH PBS GEH BT GEH BT LST MST
GRG (Set of 2) (Set of 2)
d = 12 to 40 d = 12 to 30
d = 12 to 30 d = 20, 25 d = 12 to 40
RALE..NPPB RPB RALT
d = 20 to 30 d = 30 d = 20, 25
Light series, without
lubrication holes
RAE..NPPB PBS PB RPB RAT
d = 12 to 50 d = 12 to 40 d = 12 to 30 d = 12 to 25 d = 12 to 40
(excluding 45)
Without
lubrication holes
GRAE..NPPB
d = 12 to 60
GE..KRRB RBS RB RRT
d = 17 to 120 d = 17 to 40 d = 17 to 30 d = 17 to 40
GE..KPPB-3 TBS TB RTT
d = 20 to 80 d = 20 to 40 d = 20 to 30 d = 20 to 40
With triple-lip seals
GE..KLLHB LBS LB RLT
d = 20 to 50 d = 20 to 40 d = 20 to 30 d = 20 to 40
With labyrinth seals
GLE..KRRB RBSL RBL RRTL
d = 20 to 70 d = 20 to 40 d = 20 to 30 d = 20 to 40
Non-locating bearings
GSH..RRB RBSA RBA RRTA
d = 20 to 50 d = 20 to 50 d = 20 to 30 d = 20 to 40
Bearings with
adapter sleeves
AY..NPPB PBSY PBY RATY
d = 12 to 30 d = 12 to 30 d = 12 to 30 d = 12 to 30
Without
lubrication holes
GAY..NPPB PBSY RATY
d = 12 to 60 d = 35 to 40 d = 35 to 40
GYE..KRRB RBSY RBY RRTY
d = 12 to 90 d = 12 to 40 d = 12 to 30 d = 12 to 40
Recommended Combinations
For the other designations, housings and bearings must be ordered and will be delivered separately.
TPI 106 USA USA.book Seite 1 Dienstag, 20. Februar 2001 7:59 07
CSLT RCSMF MSB MSA LSTR MSTR GEH
CST GRG (Set of 2) MSB (Set of 2) (Set of 2) MSTU
d = 20 to 30 d = 12 to 30 d = 12 to 60 d = 20 to 50 d = 20 to 30 d = 20 to 35 d = 25 to 30
Relubricable Light series
PCSLT RALTR
d = 20 to 30 d = 20 to 30
RCSMF RA RATR
d = 12 to 30 d = 12 to 40 d = 20 to 35
RA GRA MSTU
d = 45 to 60 d = 20 to 50 d = 25 to 30
RR GRR RRTR
d = 17 to 60 d = 20 to 50 d = 20 to 35
TR GTR RTTR
d = 20 to 60 d = 20 to 50 d = 20 to 35
LR GLR RLTR
d = 20 to 50 d = 20 to 50 d = 20 to 35
RRL GRRL RRTRL
d = 20 to 60 d = 20 to 50 d = 20 to 35
RRA GRRA RRTRA
d = 20 to 40 d = 20 to 40 d = 20 to 35
RAY RATRY
d = 12 to 30 d = 20 to 30
RAY GRAY RATRY
d = 35 to 60 d = 20 to 50 d = 35
RRY GRRY RRTRY
d = 12 to 60 d = 20 to 50 d = 20 to 35
TPI 106 USA USA.book Seite 1 Dienstag, 20. Februar 2001 7:59 07
Corrosion-Protected Cast Iron Mounted Units Corrosion-Prot.
GG ASE..FA125 GG CJT..FA125 GG CJ..FA125 GEH PBS GEH BT
d = 12 to 60 d = 12 to 60 d = 12 to 60 d = 12 to 40 d = 12 to 30
GRAE..NPPB FA 125 PASE..FA 125 PCJT..FA 125 PCJ..FA 125 PBS..FA 125 PB..FA 125
d = 12 to 60 d = 12 to 60 d = 12 to 60 d = 12 to 60 d = 12 to 40 d = 12 to 30
GE..KRRB FA 125 RASE..FA 125 RCJT..FA 125 RCJ..FA 125 RBS..FA 125 RB..FA 125
d = 20 to 50 d = 20 to 50 d = 20 to 50 d = 20 to 50 d = 20 to 40 d = 20 to 30
GYE..KRRB VA
d = 12 to 40
Cast Iron Mounted Units for Higher Temperatures
GG ASE GG CJT GG CJ GG TUE
d = 12 to 120 d = 12 to 75 d = 12 to 120 d = 20 to 120
GE..KRRB FA 101T RASE..FA101T RCJT..FA101T RCJ..FA101T RTUE..FA101T
d = available on request Diameters Diameters Diameters Diameters
For temperatures from available available available available
–40 ºC to +150 ºC on request on request on request on request
GE..KRRB FA 164.1 RASE..FA164.1 RCJT..FA164.1 RCJ..FA164.1 RTUE..FA164.1
d = 17 to 120 d = 20 to 120 d = 30 to 50 d = 25 to 90 Diameters
For temperatures from available
–20 ºC to +250 ºC on request
GAY..NPPB FA 164.1 PASEY..FA164.1 RCJTY..FA164.1 PCJY..FA164.1
d = 12 and 15 d = 12, 15 d = 12, 15 d = 12, 15
For temperatures from
–20 ºC to +250 ºC
GE..KLLHB LASE LCJT LCJ
d = 20 to 50 d = 20 to 50 d = 20 to 50 Diameters
With labyrinth seal available
For temperatures from on request
–40 °C to +150 °C
GLE..KRRB RASEL RCJTL RCJL RTUEL
d = 20 to 70, d = 20 to 70 Diameters d = 20 to 70 Diameters
Non-locating bearings available available
For temperatures from on request on request
–40 ºC to +150 ºC
Recommended Combinations
TPI 106 USA USA.book Seite 1 Dienstag, 20. Februar 2001 7:59 07
Radial Insert Ball Bearings and Sheet Steel Housings
MST..FA 125 MSB..FA 125 MSA..FA 125 MSTR..FA 125 MSB..VA MSA..VA
(Set of 2) (Set of 2) MSB..FA 125 (Set of 2) MSB..VA
d = 12 to 40 d = 12 to 60 d = 20 to 50 d = 20 to 35 d = 12 to 30 d = 20 to 30
Relubricable Relubricable
RAT..FA 125 RA..FA 125 GRA..FA 125 RATR..FA 125
d = 12 to 40 d = 12 to 60 d = 20 to 50 d = 20 to 35
RRT..FA 125 RR..FA 125 GRR..FA 125 RRTR..FA 125
d = 20 to 40 d = 20 to 50 d = 20 to 50 d = 20 to 35
RRY..VA GRRY..VA
d = 12 to 30 d = 20 to 30
Sheet steel housings and bearings must be ordered and will be delivered separately.
FA 125 = Special INA Corrotect® coating (zinc-iron-cobalt plating)
VA = Stainless steel
Bearing End Covers
As an accessory, INA supplies plastic bearing end covers to cover shaft ends.
These end covers provide:
■ Protection against injury by rotating shafts
■ Added protection against contamination
Bearing end covers are available for:
■ Mounted units PASE.., PASE..FA 125, RASE.., RASE..FA 125, PSHE.., RSHE..,
PCJT.., PCJT..FA 125, RCJT.., RCJT..FA 125, PME.., RME.., PCJ.., PCJ..FA 125, RCJ..,
and RCJ..FA 125, for shaft diameters of 20, 25, 30, 35, 40, 50 and 60 mm
Please contact INA for details.
Housings have a mounting groove for end covers on the locking collar side.
TPI 106 USA USA.book Seite 1 Dienstag, 20. Februar 2001 7:59 07
Features and Selection of Mounted Units
INA housings are robust machine elements that are ready as well as inner rings extended on one or both sides, and
to install and particularly easy to fit. They provide reliable and contact or non-contact seals. The bearings are fastened on
economical bearing arrangements for standard operating the shaft radially by an eccentric locking collar or two set
conditions as well as for work in damp and heavily screws in the inner ring.
contaminated environments.
These units have proven effective over the long term Compensation of Misalignment
and are available in many different series. The spherical interface between the bearing and the housing
The standard design consists of: allows the outer ring of the radial insert ball bearing in the
■ A pillow block or flanged housing unit housing bore to compensate for shaft misalignment errors.
This compensating feature corrects tilting of the shaft caused
■ Radial insert ball bearings, greased and with seals by inaccuracies in assembly or the tolerances of surrounding
on both sides structures.
Cast Iron or Sheet Steel Housings Special Applications
The housings are made of cast iron or sheet steel. In addition to the standard designs, mounted units are also
Cast iron housings are unsplit, have a high tensile strength, available for higher operating temperatures and in a corrosion
and are threaded for standard SAE grease nipples for resistant version.
lubrication of the radial insert ball bearings. Sheet steel
housings are split-design units made from deep drawn sheet INA Catalog “Ball Bearings, Housed Bearing Units”
steel and are suitable for medium tensile loads. This catalog contains a description of INA’s entire product line
for these bearings and mounted units, as well as information
Radial Insert Ball Bearings on additional INA products, such as idler pulleys and
The radial insert ball bearings have a spherical outside surface sprockets.
on the outer ring that is adapted to the housing bore,
Radial Insert Ball Bearings, Combined with C
GG ASE GG SAO GG SHE
d = 12 to 120 d = 30 to 100 d = 12 to 60
Heavy series
1
RAE..NPPB
d = 12 to 50 (excl. 45)
Without lubrication holes
Criteria for
Mounted Unit Identification: GRAE..NPPB PASE PSHE
d = 12 to 60 d = 12 to 60 d = 12 to 60
1 Find the housing in the top row 2 3
2 Find the bearing in the first column GE..KRRB RASE RSHE
d = 17 to 120 d = 17 to 120 d = 17 to 60
3 The point in the chart where the
bearing and the housing intersect
GNE..KRRB RSAO
– features the recommended d = 30 to 100 d = 30 to 100
Heavy series
mounted unit for this combination
GE..KPPB3 GG ASE.. GG ASE..
TPI 106 USA USA.book Seite 4 Dienstag, 20. Februar 2001 7:59 07
· Printed in Germany
Sach-Nr. 004-408-969/TPI 106 US-D 01015
INA Wälzlager Schaeffler oHG
91072 Herzogenaurach (Germany)
www.ina.com
Germany:
Telefon 0180 / 5 00 38 72
Telefax 0180 / 5 00 38 73
E-Mail
[email protected] Other Countries:
Telefon +49 / 9132 / 82-0
Telefax +49 / 9132 / 82-49 50
