KeyGrabber USB

User’s Guide

KeyGrabber USB
inc. Mac Compatibility Pack (MCP)

Check http://www.keelog.com/ for the latest version of this document.

1 Copyright © www.keelog.com
 KeyGrabber USB

Table of contents
Table of contents ...................................................................................................................... 2
Getting started .......................................................................................................................... 2
Introduction .............................................................................................................................. 3
About the product ................................................................................................................. 3
Features ............................................................................................................................... 3
Requirements ....................................................................................................................... 3
Applications .......................................................................................................................... 4
Quick start ................................................................................................................................ 5
Recording keystrokes ............................................................................................................... 6
Viewing recorded data .............................................................................................................. 7
Flash drive options ................................................................................................................... 9
Phrase searching .................................................................................................................. 9
Memory erasing .................................................................................................................... 9
Memory formatting .............................................................................................................. 10
Configuration options ............................................................................................................. 11
Mac Compatibility Pack .......................................................................................................... 14
National keyboard layouts ...................................................................................................... 15
Specifications ......................................................................................................................... 16
Troubleshooting...................................................................................................................... 17
List of special keys ................................................................................................................. 19
Legal disclaimer .................................................................. Błąd! Nie zdefiniowano zakładki.

Getting started
Already familiar with KeyGrabber keyloggers?

 Start key-logging in 2 simple steps: section Quick start

New to KeyGrabber hardware keyloggers?

 Learn about keystroke recording first: section Recording keystrokes

 Then learn to retrieve the recorded data: section Viewing recorded data

Questions or problems?

 Go through the Troubleshooting section.

2 Copyright © www.keelog.com
 KeyGrabber USB

Introduction

About the product

The KeyGrabber USB is an advanced USB hardware keylogger with a huge internal flash
disk, organized as a file system. Text data typed on the USB keyboard will be captured and
stored on the internal flash drive in a special file. This data may be retrieved on any other
computer with a USB port and keyboard, by switching to flash drive mode. The keylogger will
pop up as a removable drive, giving instant access to all captured data. The KeyGrabber USB
is 100% transparent for computer operation and no software or drivers are required.

Features

• High-capacity internal flash memory, accessible as a USB removable drive

• Compatible with all USB keyboards (including Linux & Mac)
• Mac Mode ensuring full compatibility with all Apple keyboards (MCP version only)
• Ultra fast memory contents retrieve via USB port
• Transparent to computer operation, undetectable for security scanners
• No software or drivers required, operating system independent
• Memory protected with strong 128-bit encryption
• Quick and easy national keyboard layout support
• Ultra-compact and discreet

Requirements

• Computer with standard USB 1.1 or 2.0 port

• USB HID-compliant keyboard (Low-Speed, Full-Speed, or High-Speed)
• Operating system with USB Mass-Storage device support

3 Copyright © www.keelog.com
 KeyGrabber USB

Applications

Employers:

• Monitor acceptable internet usage

• Monitor employee productivity
• Detect unauthorized access attempts
• Backup typed text
• Collect computer usage statistics

Parents:

• Monitor your family's computer activity

• Protect your child from on-line hazards and predators
• Observe WWW, E-mail, and chat usage
• Save a copy of written documents

Investigators:

• Monitor remote computers

• Retrieve unknown passwords, operating system independent
• Collect computer-related evidence
• Detect unauthorized use of computer equipment

4 Copyright © www.keelog.com
 KeyGrabber USB

Quick start
This section contains concise information on basic keylogger handling. If you need detailed
instructions, please refer to sections Recording keystrokes and Viewing recorded data.

To record keystrokes, plug the device in-between the keyboard and USB port.

To view recorded data, plug the device in-between the keyboard and USB port, and press
the 3-key combination simultaneously (by default K, B, S)

The keylogger will pop up as a removable drive, containing the file LOG.TXT. This file will
contain all recorded keystroke data.

5 Copyright © www.keelog.com
 KeyGrabber USB

Recording keystrokes
Installation of the KeyGrabber USB is quick and easy. Simply plug it in between the USB
keyboard and the USB port. No software or drivers are required. The USB hardware
keylogger will start recording all data typed on the keyboard to the internal flash disk. Once
recording starts, new data will be appended to the end of the log file. The device is completely
transparent for computer operation.

Disconnect the USB keyboard from the USB port at the computer or hub.
This can be done even with the computer up and running.

Connect the hardware USB keylogger between the USB keyboard and the USB port.
Keystroke logging will start automatically.

Note: If an external USB hub is being used, connect the keylogger between the hub and the
USB keyboard.

6 Copyright © www.keelog.com
 KeyGrabber USB

Viewing recorded data

Once keystroke data has been recorded, it may be retrieved on any computer with a USB
port. This is done by switching to flash drive mode. The KeyGrabber USB and keyboard
should be connected in the same way, as during normal recording.

Each device has a built-in 3-key combination (by default K, B, S). Press these 3 magic keys
simultaneously to trigger flash drive mode.

After a few seconds, the hardware keylogger will automatically get detected as a mass
storage device. The operating system will use the standard built-in mass storage driver (MS
Windows 7 in the following examples).

Depending on the drive letters available, the device will be visible as a new drive, for example
F:. Use the systems file manager to browse this disk (for example Explorer). The keyboard
will be disconnected and unavailable, so the mouse must be used to browse the disk.

7 Copyright © www.keelog.com
 KeyGrabber USB

The removable disk will contain the file LOG.TXT with a text log of all captured data.
Keystroke data is formatted in the same as it would appear on the screen, with special keys in
brackets ([Ent], [Esc], [Del] etc.). This file can be viewed and searched with any text editor,
such as Notepad or MS Word.

During flash drive mode, the USB keyboard is inaccessible, and usually the mouse is the only
operating device. Therefore it is a good idea to copy the file to the hard drive, and restore
standard operation. Erasing and editing the file LOG.TXT is obsolete, because the flash disk
has a huge memory worth of years of intensive typing.

Switching back to standard mode can be achieved by a safe software removal of the flash
disk. Use the systems standard disk removal procedure. For MS Windows, left-click on the
Safe Removal icon in the system tray and select the appropriate drive. Some systems will
require to unplug the reconnect the keylogger.

Note: During the first switch to flash drive mode, the operating system can ask for drivers. In
such case choose automatic driver installation (usually default option).

Note: While in flash drive mode on non-MCP devices, the USB keyboard is disabled. Use the
mouse to operate the system. If mouse operation is dependent on the keyboard (i.e. wireless
desktop or USB keyboard with mouse attached to it), connect the keyboard/mouse combo to
a different USB port after switching to flash drive mode.

8 Copyright © www.keelog.com
 KeyGrabber USB

Flash drive options

Flash drive mode allows several standard examination and maintenance procedures to be
performed through the operation system. The most common operations are described below
with MS Windows as an example operating system.

Phrase searching

Copy the log file LOG.TXT to the hard drive and restore standard mode, by disconnecting the
flash disk. Open LOG.TXT in any text editor, such as Notepad or MS Word. The entire log file
may be viewed, or searched using the text editor built-in Find option (CTRL-F). To locate
WWW & E-mail addresses, define the search phrase as ‘www’, ‘.com’, ‘@’ etc.

Memory erasing

The flash disk high capacity makes memory erasing obsolete. This is equivalent to several
years’ worth of intensive typing. However, it is possible to keep the log file clean by erasing it
occasionally. This can be achieved by the standard system file delete procedure while in flash
drive mode. For MS Windows active the context menu for the log file and select Delete. A
new log file will be created on the next power-up.

9 Copyright © www.keelog.com
 KeyGrabber USB

Memory formatting
Flash disk formatting will erase all data present, including the log, configuration, and layout
files. For MS Windows activate the flash drive context menu and choose Format. Make sure
the correct disk is selected and check the option Quick Format.

Disconnect and reconnect the keylogger from the USB port immediately after formatting has
finished. Default settings will be restored and a new log file will be created.

10 Copyright © www.keelog.com
 KeyGrabber USB

Configuration options
The KeyGrabber USB may be configured through the file CONFIG.TXT, placed in the flash
drive root folder. Use any text editor to prepare such a configuration file, containing the
following text:

Password=KBS
LogSpecialKeys=Medium
DisableLogging=No

Copy this file to the root folder in flash drive mode. The new configuration will be loaded on
next power-up.

The following list presents the most common configuration options. All variable and value
strings are case insensitive.

Password sets the 3-key combination for triggering flash drive mode. Any three-letter key
combination is allowed (sequence is irrelevant). The password setting is national-layout
independent. Default value is KBS.

LogSpecialKeys sets the logging level for special keys, such as Enter, Escape, F1...F12 etc.
Special keys are logged in brackets, i.e. [Ent]. Allowed values are None (only text is logged),
Medium (text with basic function keys are logged), and Full (text with all special keys are
logged). Default value is Medium.

DisableLogging allows to disable keystroke logging, however does not affect mode
switching. Allowed values are Yes (logging disabled) and No (logging enabled). Default value
is No.

DisableLayout allows disabling the currently loaded layout, without having to delete the
layout file. Allowed values are Yes (layout disabled) and No (layout enabled, if present).
Default is No.

11 Copyright © www.keelog.com
 KeyGrabber USB

MacMode allows to enable/disable Mac Mode on devices with the MCP option. Mac Mode is
a special mode ensuring full compatibility with all Apple keyboards. Allowed values are Yes
(Mac Mode enabled) and No (Mac Mode disabled). Default value is Yes.

Encryption enables flash disk encrypting. Encryption will ensure full confidentiality of the
stored data, even if the device is physically tampered with. Allowed values are Yes
(encryption enabled) and No (encryption disabled). Default is No.

Important: toggling the encryption setting will format the entire flash disk. All data will be lost,
including the configuration and layout files!

An example configuration file contents is shown below:

Password=SVL
LogSpecialKeys=Full
Encryption=Yes
MacMode=No

A full list of available parameters with descriptions is available below.

Basic parameter list

Parameter Values Example Description

3-character password Three-character key combination for
Password Password=SVL
(default KBS) activating flash drive mode.
None
LogSpecialKeys Medium (default) LogSpecialKeys=Full Special key logging level.
Full
Yes
DisableLogging DisableLogging=Yes Keystroke logging disable flag.
No (default)
Yes
National layout disable flag (see
DisableLayout No (default) DisableLayout=Yes
section National keyboard layouts).
Menu
Yes (default) Mac Mode enable flag. Available only
MacMode MacMode=No
No on devices with MCP.

12 Copyright © www.keelog.com
 KeyGrabber USB

Advanced parameter list (use only when you know what you’re doing!)

Parameter Values Example Description

Flash drive encryption setting
Yes
Encryption Encryption=No (caution: changing this value will re-
No (default)
format the flash drive).
Yes SupportReportProtocol
SupportReportProtocol Report protocol support flag.
No (default) =No
No
Low (default)
CheckShortFrame CheckShortFrame=No Short frame fast filter option.
Medium
High
Yes (default)
CheckModifierByte CheckModifierByte=No Modifier byte check flag.
No
Filter value
FrameFilter (range 0…255, FrameFilter=226 Frame filter value.
default 98)
Auto (default)
Full
KeyboardSpeed KeyboardSpeed=Auto USB keyboard speed setting.
Low
Mixed
Yes
CheckOverflow CheckOverflow=Yes Overflow check flag.
No (default)

13 Copyright © www.keelog.com
 KeyGrabber USB

Mac Compatibility Pack

The Mac Compatibility Pack (MCP) is a hardware enhancement ensuring full compatibility
with Apple Mac computers and keyboards. Several Apple keyboards are USB High-Speed
and Low-Speed combos, creating a challenge for all types of USB keyloggers. The aluminum
Apple A1243 and A1242 are typical examples:

The KeyGrabber USB with the Mac Compatibility Pack features a special Mac Mode (enabled
by default), which will convert the keystroke data stream to USB Full-Speed, ensuring proper
operation of the keyboard and logging of all keystrokes. Mac Mode is compatible with
standard keyboards too, so the KeyGrabber does not have to be reconfigured.

When enabled, Mac Mode will add an additional pass-through USB hub to the system. If this
is undesired, Mac Mode can always be disabled, restoring normal operation. To disable Mac
Mode, open the configuration file CONFIG.TXT (see section Configuration options) and add
the following entry:

MacMode=No

14 Copyright © www.keelog.com
 KeyGrabber USB

National keyboard layouts

It is possible to enable a national layout for language-adapted keyboards, such as French,
German etc. This will allow national characters to get logged properly (including those with Alt
Gr), such as ö, æ, ß, ó etc. The following example demonstrates the advantages of applying
the German national layout.

Text logged without layout Text logged with layout

Kezlogger )PS-2 / USB= KeyLogger (PS/2 & USB)

To enable a national layout, the appropriate layout file named LAYOUT.USB must be placed
on the flash disks root folder. The file must be copied in flash drive mode. Layout files may be
obtained from the CD-ROM attached with the device.

To enable the layout, safely remove the flash disk. On power-up, the layout file will be loaded
automatically.

15 Copyright © www.keelog.com
 KeyGrabber USB

Specifications

Power supply – 4.5 V – 5.5 V DC (drawn from the USB port)

Power consumption – 65 mA (0.33 W)

Keyboard support – USB HID-compatible keyboard (Low-speed, Full-speed, High-speed)

Maximum burst log speed - 500 byte/s (approx.)

Maximum continuous log speed - 100 byte/s (approx.)

Data retention - 100 years

Maximum log read speed – 150 kB/s

Dimensions inc. connectors (L x W x H) - 53 mm x 20 mm x 12 mm (2.1" x 0.8" x 0.5")

16 Copyright © www.keelog.com
 KeyGrabber USB

Troubleshooting
The KeyGrabber USB will not work with the following hardware configurations:

1. Internal laptop keyboards

2. Bluetooth keyboards
3. USB-PS/2 and PS/2-USB adapters
4. Non-conformant USB keyboards

The keyboard is not responding

The keyboard connector or the keylogger connector is not inserted firmly. Please check the
connection with the USB keyboard and port.

The keylogger does not switch to flash drive mode

Please check the following:

1. Is the keylogger inserted between the keyboard and the keyboard port on the PC or
hub?
2. Is your 3-key combination correct?
3. Are you pressing the 3 keys simultaneously? The 3-key combination will not be
accepted if pressed sequentially.

Problems with logging national characters

Please check if you have downloaded the correct layout file and copied it to the flash disk root
directory? If not, please check the National keyboard layouts section.

The keyboard doesn’t work in flash drive mode

This is normal behavior for non-MCP devices. In flash drive mode, the keylogger will install
the removable disk instead of the keyboard. Use the mouse to copy the log file to the hard
drive, then restore normal operation. Alternatively, you may connect the keyboard to a
different USB port after switching to flash drive mode.

The mouse and keyboard don’t work in flash drive mode

This can happen on wireless keyboards and keyboard/mouse combos for non-MCP devices.
In flash drive mode, the keylogger will install the removable disk instead of the
keyboard/mouse combo. To get around this, connect the keyboard/mouse to a different USB
port after switching to flash drive mode.

17 Copyright © www.keelog.com
 KeyGrabber USB

I’ve checked everything, nothing helps!

If you are still experiencing problems, please do the following:

1. Check if the problem appears on a different keyboard.

2. Check if the problem appears on a different computer.
3. Contact the dealer you have purchased the device from. Please supply all necessary
information (keyboard model and manufacturer, OS type and version, and a short
description of the problem).

18 Copyright © www.keelog.com
 KeyGrabber USB

List of special keys

[Esc] - Escape [Prn] - Print Screen

[F1] - F1 [End] - End
[F2] - F2 [Scr] - Scroll Lock
[F3] - F3 [Up] - Up
[F4] - F4 [Dwn] - Down
[F5] - F5 [Lft] - Left
[F6] - F6 [Rgh] - Right
[F7] - F7 [Num] - Num Lock
[F8] - F8 [-N] - - (num)
[F9] - F9 [+N] - + (num)
[F10] - F10 [.N] - . / Delete (num)
[F11] - F11 [/N] - / (num)
[F12] - F12 [*N] - * (num)
[Ctl] - Control [0N] - 0 / Insert (num)
[Alt] - Alt [1N] - 1 / End (num)
[Ins] - Insert [2N] - 2 / Down (num)
[Hom] - Home [3N] - 3 / Page Down (num)
[PUp] - Page Up [4N] - 4 / Left(num)
[PDn] - Page Down [5N] - 5 (num)
[Del] - Delete [6N] - 6 / Right (num)
[Win] - Win [7N] - 7 / Home (num)
[Aps] - Apps [8N] - 8 / Up (num)
[Cap] - Caps Lock [9N] - 9 / Page Up (num)
[Ent] - Enter [Pwr] - Power
[Bck] - Backspace [Slp] - Sleep
[Tab] - Tab [Wke] - Wake

19 Copyright © www.keelog.com
 KeyGrabber USB

Legal disclaimer
No responsibility is taken for any damage, harm or legal actions caused by misuse of this
product. The user should follow the guidelines contained in this document, otherwise no
liability will be assumed. It is the user's responsibility to obey all effective laws in his/her
country, which may prohibit usage of this product.

In most countries the usage of a keylogger is fully legal as long as a clear notice is displayed,
informing the user of the monitored equipment about the presence of a keystroke logger. We
encourage the use of this equipment only for the purpose of monitoring your own computer,
especially for protecting children against online hazards. It is NOT LEGAL to use a keylogger
for the purpose of intercepting third party data, especially passwords, banking data,
confidential correspondence, etc. If in doubt, please seek legal advice before using a
keystroke logger. A good starting point is the U.S. Department of Justice Letter on Keystroke
Monitoring and Login Banners, according to which a clear notice should be displayed,
warning that user keystrokes may be logged.

For more information, visit the following websites:

http://www.keelog.com/

http://www.airdrivewifi.com/

You should not use this device to intercept

data you are not authorized to possess,
especially passwords, banking data,
confidential correspondence etc.

20 Copyright © www.keelog.com