Phased Array Flaw Detector
NOVOTEST UD4701
Name Phased Array Flaw Detector NOVOTEST UD4701PA
Photo
Portable ultrasonic flaw detector NOVOTEST UD4701PA – device for detecting
defects in finished products, semi-finished products and welded joints, as well as
determining their coordinates and using DAC and DGS functions. Equipped with
a contrast color TFT display (resolution of 640×480), reliable enclosure, the
device is always ready for operation, both in the laboratory and in locations with
aggressive environmental influences such as temperature, dirt and precipitation.
In addition to traditional functions, the flaw detector has an input of a 2-axis
encoder, which allows user to connect various scanners to build C-, B- and other
scans and TOFD scan of the tested part of the product.
Use the device may not even highly be qualified specialists, since adjustment
and calibration take less than 5 minutes, and pre-defined functions allow for quick
inspection and ensure the quality of the results.
NOVOTEST UD4701PA allows user to assess the state of products or structural
elements on site and without pre-testing. This flaw detector is indispensable in
such industries like construction, machine building, production of rolled metal,
power engineering, research works, chemistry, mining etc.
Purpose
Standards EN 12668-1, ISO 18563-1
o 16-channel PA with C-SAFT / TFM signal processing
o Recording of signals by 1 or 2 position rotary encoder
o RF Amplifier for equalizing the sensitivity at the corners of the input
o Adjusting the aperture and the scanning angle
o Normal Flaw Detector Mode
o TOFD mode
Advantages
o Weld geometry constructor;
o Interface: USB
o Easy and convenient firmware upgrade via USB
o Power: Li-ion battery or external power supply
Up to 10-12 hours of battery life
o Phased Array Flaw Detector
o UT-probes – 2 pcs
o Cable for probes
o Power supply and charger
Standard o Memory card
set o Calibration certificate
o Operating manual
o Case
Weight 1.4 kg with batteries
Size (H x W x L) 200 mm x 225 mm x 80 mm
Operating temperature range From -30 C to +55 C
Supply voltage 15V / 2,5А DC
External power supply Power Supply 220В AC
Not less 10 hours of operation from the built-
Working hours
in battery
Battery Li-ion 10.8V, 5000 mА/h
Transducer connectors 2 Х Lemo00,1 Х Lemo 16
Firmware Upgrade Self-powered by USB
Menu Language Russian, English
Interface USB
200 settings with A-signal
Memory
1000 monitoring protocols and scan results
Specification
Color high contrast, TFT 640 x 480 pixels,
Display
(130 x 100 mm).
Changing the color schemes of the
screen for viewing and lighting Yes
conditions
Processing the image on the screen
Full-featured processing and analysis
after “freezing” the screen
Support for the weld inspection
Yes, with automatic calculation D1.1 Ratio
standard AWS D1.1
Comparison with the saved
Automatic in the entire amplification range
reference signal
Estimation of the size of defects in
Built-in ADD diagrams
the classical flaw detector mode
In percentage of the height of the screen
In dB relative to the threshold level in the
Amplitude measurement zone
In dB relative to the reference signal,
By DAC
Automatic Defect Alarm Light, sound
S-scan
А-scan + S-scan,
Simultaneous display of signals on
the screen in the PR mode in А-scan + B-scan,
manual mode
S-scan + B-scan,
А-scan + S-scan + B-scan
Determination of linear dimensions By two markers, set manually or
between reflectors in S-scan automatically
Automatically in the entire range of S-scan,
Calculation of the coordinates of the using a mathematical model of the prism in the
reflectors on the S-scan memory of the flaw detector, the accuracy of
determining the coordinates to 0.1mm
Automatically on the maximum amplitude of
Algorithm for finding a defect in the the signal in the zone, auto at the maximum
testeing zone amplitude of the signal on the selected beam,
manually
Rectangular zone for allocation of a part of a
signal on an S-scan with an accuracy of setting
Control Zones boundaries to 0.1mm
2 independent time-domain zones
Display of signals on the screen А-scan, B-scan, С-scan, D-scan, S-scan, L-
(visualization) scan, TOFD
Digital signal filtering Yes
Analog Signal Filtering Yes
Additional key + dB 6
Electrical damping of the converter
25 Ω, 50 Ω, 600 Ω
to increase the resolution
Gain Control Range 100 dB, in step 0.5, 1, 2, 6 dB
Broadband: 0.1-20 MHz, with the option of
Amplifier
narrowband filters
Display of real weld geometry (True-to-
B-Scan
geometry imaging)
Single-channel TOFD with recording by the
Using TOFD
path of probe or time
Any 2-axis scanners with optical encoders,
scans in the memory of the device, analysis of
Using scanners
scans in the device, and in a special analysis
software
Built-in helper, displaying the cutting of the
Welded joint geometry designer
seam on the scan image
Automatic calibration of ultrasonic
Yes
velocity
Automatic calibration of the control
Yes
range for a given seam thickness
Is automatically set depending on the set
Frequency of recurrences
parameters
Radio pulse amplitude of 50 V, with adjustable
Sounding impulse
number of periods (0.5-5)
Speed range 100 – 10 000 m/s
S-scan (sector scan), L-scan (linear scan with
Scanning mode
a constant angle)
min.: 0 – 5 mm
Max.: 0 – 3200 mm (depends on the operating
Scan
modes and the converter)
In step 0.1, 1, 5, 10 mm
Automatic calibration of the delay in With V-2 calibration block from reflector,
the prism calibration of TOFD converters
TVG, up to 10 dB / μs, with an accuracy of 0.01
Leveling of sensitive in depth
dB / μs
Aligning the sensitivity at the 2D correction (10 lines in depth, 20 points for
corners while scanning corner correction each)
Adjusting the angle scan angle From 0,3 to 2 degrees
Adjustment of working aperture 4, 8 and 16 simultaneously working elements
Adjustment of the FR parameters of Automatic from non-volatile memory of the
the converter device
Digital signal focusing using the C-SAFT / TFM
Algorithm for signal processing
method
Type of PHAs used Any classic 16-channel PA
o Additional UT-probes
o Additional cables for probes
o Charger
o Case for comfortable operating
o Calibration blocks
Available
options
Warranty Standard 3-year warranty. Extended warranty up to 5 years is also available
Payment 100% in advance. TT, WU, PayPal, Credit card
Delivery CIP, FCA etc. DHL, TNT, FedEx, UPS etc. Shipment - within 2 weeks
Company info:
Our company NOVOTEST designs and manufactures instruments for NON-
DESTRUCTIVE QUALITY TESTING. We are located in Ukraine, 5 Spasskaya str.,
Novomoskovsk.
NOVOTEST produces instruments for measuring a wide range of parameters and quality
control for the majority of products:
● metal hardness of various types;
● coatings thickness;
● ultrasonic flaw detectors;
● ultrasonic thickness gauges;
● instruments for magnetic testing;
● construction materials quality monitoring instruments;
● environmental control equipment and many other devices.
Our benefits:
● More than 10 years on NDT market;
● Leading manufacturer of NDT devices in Ukraine;
● Representative offices in more than 30 countries around the world;
● All our devices are covered by standard 3-year warranty. Extended warranty up to 5 years
is also available;
● Powerful development center;
● Constant expansion of the product range;
● Manufacturing customized NDT systems;
● Solutions for non-standard NDT tasks;
● After-sales service and technical support;
● Individual approach for cooperation with dealers.
For any information, please feel free to contact us!
We will be glad to answer for any questions!
