Scribd
Upload
65 views1 page

Pump Data Sheet

This document is a pump calculation sheet that contains information needed to size a pump for a particular application. It includes sections to provide details on the liquid being pumped, operating conditions, suction and discharge pressures, net positive suction head (NPSH) calculations, estimated power requirements, and notes. The sheet also contains conversion factors and leaves space to record the dates and names of people involved in making revisions or approving the pump sizing.

Uploaded by

ZUCEL ARLLETTE MAJUS CASTANEDA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
65 views1 page

Pump Data Sheet

This document is a pump calculation sheet that contains information needed to size a pump for a particular application. It includes sections to provide details on the liquid being pumped, operating conditions, suction and discharge pressures, net positive suction head (NPSH) calculations, estimated power requirements, and notes. The sheet also contains conversion factors and leaves space to record the dates and names of people involved in making revisions or approving the pump sizing.

Uploaded by

ZUCEL ARLLETTE MAJUS CASTANEDA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

A.K.C.

TECHNOLOGY
PUMP CALCULATION SHEET Document No.
Sheet of Rev.
Job Item No. (s)
Item Name. No. Working Total No. off

UNITS CASE I CASE II SKETCH OF PUMP HOOK-UP


1
2 Liquid Pumped
3 Corrosion/Erosion
4 Due To
5 Operating Temp. (T) o
C o
F
6 Specific Gravity at T
7 Viscosity cP cP
8 Vapor Pressure at T bar a psi a
9 Normal mass Flowrate kg/h lb/h
10 Normal Vol. Flowrate m3/h gpm
11 Min. Vol. Flowrate
12 Design Vol. Flowrate m3/h gpm
13 SUCTION CONDITION
14 Pressure at Equipment barg psi g + +
15 Static Head bar psi +/-
16 Total - Lines 14 + 15 bar psi + +
17 Suction Line P bar psi - -
18 Filter/Strainer P bar psi - -
19
20 Total Suction Pressure bar g psi g + +
21 DISCHARGE CONDITION
22 Pressure at Equipment bar g psi g + +
23 Static Head bar psi +/- +/-
24
25 Exchanger P bar psi + +
26
27 Furnace P bar psi + +
28 Orifice P bar psi + +
29 Control Valve P bar psi + +
30
31 Line P bar psi + +
32
33 Total Discharge Press. bar g psi g + +
34 Differential Pressure bar psi
35 Differential Head bar psi
36 NPSH NOTES
37 Total Suction Pressure bar a psi a 1. Pump shut-ff head not to exceed………
38 Vapor Pressure bar a psi a
39 NPSH - Lines 37 - 38 bar a psi a 2. Relief valve on pump discharge to be set at ……………
40 = m ft.
41 Safety Margin m ft. 3. Pump case design pressure…………
42 NPSH - Lines 40-41 m ft. design temperature……..
43 Hydraulic Power kW Hp
44 Estimated Efficiency % % 4. Sealing/flushing fluid available:
45 Estimated Abs. Power kW Hp
46 Type of Pump 5. Cooling medium available:
47 Drive
48 6. Insulation required:
49 Material - Casing
50 - Impeller 7. Start-up/commissioning fluid SG.
51 -Shaft
52
53 Sour Service Yes/No
54 HEAD m = 10.2 x bar /SG m = 10 x kg/cm2 / SG ft = 2.31 x psi / SG
55 VOLUME m3/h x SG x 1000 = kg/h igpm x SG x 600 = lb/h
56 POWER kW=m3/h x bar/36.0 kW=m3/h x kg/cm2 /36.71 Hp = igpm x psi/1427
57 1 Date 2 Date 3 Date 4 Date 5 Date
58 Description
59 Made/Revised by
60 Checked by
61 Approved Process
62 Approved

31

You might also like