Scribd
Upload
255 views2 pages

Thales SAGA Laser Spec

The document provides information about the SAGA HP Flashlamp-Pumped Nd:YAG Laser Series from Thales, including its features, specifications, and utilities requirements. It is a solid state laser primarily used for pumping other lasers and laser shock peening applications.

Uploaded by

JYK STONE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
255 views2 pages

Thales SAGA Laser Spec

The document provides information about the SAGA HP Flashlamp-Pumped Nd:YAG Laser Series from Thales, including its features, specifications, and utilities requirements. It is a solid state laser primarily used for pumping other lasers and laser shock peening applications.

Uploaded by

JYK STONE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

thalesgroup.

com

SAGA HP
Flashlamp-Pumped Nd:YAG
Laser Series

Ultra reliable
User friendly
Best beam quality in
its category
SAGA HP Typical SAGA HP beam profile at 532 nm

Flash Pump
Solid State Laser
Applications Features and Benefits
 Pump laser for ultrafast PW & TW systems  Largest installed base (more than 500 units)
 Laser shock peening  Field proven reliability for more than 20 years

 Ideal pump for OPO and dye lasers  Meet the highest requirements for Ti:Sa pumping with
the market best beam quality
Long Term Stability of Saga HP  Hands free operation, user friendly product
over 10 Hours  Cost effective solution for industrial applications

Specifications at 532 nm
MODEL SAGA HP
Repetition Rate (Hz) 5 or 10
Energy per pulse (J)

-> At 1064 nm 2.2


Physical Characteristics

© Thales 2021. All rights reserved. Thales, the Thales logo, are trademarks and service marks of Thales and are registered in certain countries. 01 February 2021.
(L x W x H)
-> At 532 nm 1.6
Power supply
Pulse to pulse energy stability (% rms) <1.2
32.68 x 23.62 x 25.59 in 83 x 60 x 65 cm Pulse duration (ns) 4 to 8
Time jitter (ns rms) 0.5
Cooling unit
Typical beam diameter (mm) 15
30.31 x 8.27 x 19.09 in 77 x 21 x 48.5 cm Divergence (mrad) <0.5
Beam pointing stability (μrad) 50
Laser head Beam spatial profile (near field) Top hat
43.70 x 11.34 x 7.40 in 111 x 28.8 x 18.8 cm Power consumption (kW) 2.4

Utilities and Environment


Requirements
Power

Voltage 208 Vac ± 5% 230 Vac ± 5%

Current 25A 20A

Frequency 60Hz 50Hz

Water
Flow > 2.7 Gal/min > 10 L/min

Static Pressure 30 – 90 psi 2 – 6 bars

Temperature 10 – 25oC 10 – 25oC

Thales LAS France SAS – 2, avenue Gay-Lussac – 78990 Élancourt – FRANCE


Tél: + 33 (0)1 30 96 70 00 > thalesgroup.com < 
[email protected] – www.thalesgroup.com/en/lasers

You might also like