Fair face soffit of 1300/1200 655 NORTH LOCATION PLAN

Hanger rod 1700/1650 AS PER PLAN CEILING LEVEL CEILING LEVEL

Fair face soffit of Slab as per structural AS PER PLAN

18
AS PER PLAN EQ. EQ.
Slab as per structural drawings

18
drawings E6
Hanger rod

500
20 463

500
500

473
Painted (paint type-3) Gypsum
board bulkhead supported on Q BLOCK
G BLOCK

Painted (paint type-3) Gypsum galvanised steel backup frame H

100
100

18
board bulkhead supported on anchored /braced to structure as BLOCK BLOCK BLOCK

18
B C D

galvanised steel backup frame required 6mm thick BLOCK

E
BLOCK
F

polished mirror
anchored /braced to structure

VARIES
with bevelled BLOCK
I
BLOCK
J
BLOCK
K
BLOCK
L
BLOCK
L
VARIES

as required edge as per

engr's approval

1153
1143
alternate location of
Plastic laminate

2400
2400
2400
suspend ceilling as per on 18mm MDF

1682
alternate location of schedule

1800
1900
1682
suspend ceilling as per

1825
NOTES
schedule

18
Lock Lock

( 3EQ. Divisions )
MDF filler packing CEILLING 1. THIS DRAWING IS THE PROPERTY OF ARCADIA ENGINEERING,

( 3EQ. Divisions )

18
MDF filler packing PVC Laminate finish to SHARJAH UAE.
PVC Laminate finish to Architrave finishes as/
Architrave finishes as/ 2. IT IS NOT ALLOWED TO REPRODUCE ITS CONTENTS IN ANY FORM
Engineer's approval EXCEPT FOR THE PURPOSE FOR WHICH IS INTENDED.

602
600
Engineer's approval Provide plastic laminated with
Provide plastic post framed edge for internal 3. THIS DRAWING IS NOT TO BE SCALED STATED DIMENSIONS ARE TO
BE CONSIDERED.
laminated with post shelves/partition

18
100 18
framed edge for

18
18
F.F.L F.F.L F.F.L 4. ANY DISCREPANCIES ARE TO BE BROUGHT TO THE ATTENTION OF

100

100
500
internal THE ENGINEER AND RESOLVED PRIOR TO COMMENCEMENT OF ANY
E5
500

WORK.
shelves/partition Storage space Porcelain Tiles Skirting to Porcelain Tiles

100
Porcelain Tiles Skirting to

75
Storage space above wardrobe match floor finish and as per Skirting to match floor 5. ALL DIMENSIONS ARE IN MILLIMETERS AND TO BE VERIFIED ON SITE
PVC Laminate finish to match floor finish and as per
above wardrobe Laminate finish to cupboard Engineer's Approval finish and as per Engineer's Approval AND APPROVED BY THE ENGINEER.
cupboard door with concealed Engineer's Approval
door with concealed hinges
hinges finishes as/ INTERNAL ELEVATION INTERNAL ELEVATION
6. ALL LEVELS ARE IN METERS.
finishes as/ Engineer's approval INTERNAL ELEVATION
Engineer's approval 7. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER
Polished Stainless Steel 1700/1650 RELEVANT DISCIPLINE DRAWINGS AND ALL RELEVANT SECTIONS OF
THE SPECIFICATION.
pull handle as/Engineer's 1300/1200 655
approval Polished Stainless AS PER PLAN AS PER PLAN AS PER PLAN
Steel pull handle EQ EQ EQ Hanger rod
CEILING LEVEL EQ. CEILING LEVEL
as/Engineer's
approval

18
E4 E3
EQ.

500

500

500
473
Adjustable shelf

100
Hanger rod

18
6MM THICK 6MM THICK
POLISHED MIRROR POLISHED MIRROR
WITH BEVELLED WITH BEVELLED
EDGE AS PER EDGE AS PER
ENGR'S APPROVAL ENGR'S APPROVAL
2400

1153
2400

2325
PLASTIC PLASTIC LAMINATE

2400
2400
LAMINATE ON ON 18mm MDF

1682
EQ.

1800
18mm MDF

1825

1825
Polished Stainless Steel Polished Stainless
pull handle as/Engineer's Steel pull handle

18
as/Engineer's Lock

( 3EQ. Divisions )
approval
1700

approval

602
PVC Laminate finish to PVC Laminate finish to
cupboard door with concealed cupboard door with concealed
EQ.

hinges finishes as/ Engineer's hinges finishes as/

100 18
approval cross bracing: Engineer's approval

18
cross bracing: F.F.L F.F.L F.F.L

100
18 mm

75

75
18 mm melamine finish
(3 nos.) PORCELAIN TILES SKIRTING TO MATCH FLOOR Porcelain Tiles Skirting to match floor PORCELAIN TILES SKIRTING
melamine finish 4mm thick Malamine finish 4mm thick melamine finish TO MATCH FLOOR FINISH
FINISH AND AS PER ENGINEER'S APPROVAL finish and as per Engineer's Approval
(3 nos.) hardboard backing finish hardboard backing to match AND AS PER ENGINEER'S
to match internal internal construction EXTERNAL ELEVATION EXTERNAL ELEVATION APPROVAL
construction EXTERNAL ELEVATION
Adjustable shelf
10
11 10 11 10

1700/1650 1300/1200 655

AS PER PLAN AS PER PLAN
Provide plastic laminated AS PER PLAN
EQ.

EQ. EQ. EQ. EQ. EQ. KEY PLAN

Provide plastic with post framed edge for EQ.
laminated with post internal shelves/partition
framed edge for
internal
shelves/partition

600
Skirting to match

600
600
Screed Filling floor finish and as per
100

Screed Filling Skirting to

100

Engineer's approval
match floor finish and as
per Engineer's approval
CB-03 CB-02 CB-01

E2 E1 PLAN
PLAN PLAN

11 WARDROBE
1 : 10
DETAILS - SECTION 05 10 WARDROBE
1 : 10
DETAILS - SECTION 04 09 WARDROBE
1 : 25
(CB-03) 08 WARDROBE
1 : 25
(CB-02) 7 WARDROBE (CB-01)
1 : 25

General Notes for Wardrobe

1.0 The contractor shall verify all dimensions at site and prepare PVC Laminate finish to
shopdrawings for Eng's approval. In case of any discrepancies shall bring R0 13/01/2020 J.F ISSUED FOR CONSTRUCTION ARADA
to the knowledge of engineer prior to fabrication. 4mm thick Melamine finish cupboard door with
No. Date (DD-MM-YYYY) By Revision Details App.
2.0 The shutters for wardrobe shall be of 18mm thk. M.D.F. board with hardboard backing finish to concealed hinges finishes
plastic laminate with post formed edges finish to match engr.'s sample. DEVELOPMENT :
3.0 The carcase shall be of 18mm thk. M.D.F. board faced with plastic match internal construction as/ Engineer's approval
laminate including lippings to all exposed edges. Internal arrangements
shall be as indicated on drawings.
AL JADA - SARAB VILLAS
4.0 The Wardrobe shall be provided with complete hardware , i.e.
concealed heavy duty hinges (120°), stainless steel handles, shelf Painted Gypsum board
100 Painted Gypsum board Provide plastic laminated
G+1+PARKING
support, etc.for complete operation. bulkhead supported on
5.0 The back panel shall be 4 mm thick plastic laminated hardboard. bulkhead supported on with post framed edge for
galvanised steel backup Polished Stainless Steel
6.0 Provide 18mm thick 100mm wide laminated MDF board architrave on galvanised steel backup internal shelves/partition PLOT NO. 7114
frame anchored /braced to pull handle as/Engineer's
the 3 side of wardrobe frame anchored /braced to Provide plastic laminated
7.0 Provide polished s.steel circuler hanger rod 100 structure as required structure as required approval DEVELOPER :
8.0 Provide 100mm high plastic laminated skirting (colour to match shutter with post framed edge for
colour ) to exposed side MDF filler packing internal shelves/partition Align shutter and skirting ARADA
9.0 Provide 18mm thick 100mm wide HDM board cross bracing behind
face DEVELOPMENTS LLC
the back panel
10. Provide 6mm thick polished mirror with bevelled edge from inside of OWNER :
shutter 1NO. mirror to be provided for each wardrobe
Laminate finish to SCREED FILLINGing ALJADA
11. All Wardrobe shall be 600mm deep unless noted otherwise.
Architrave finishes as/
12. Provide 18mm thick MDF board. Filler board on sides of the wardrobe
size to suite site conditions. Finish to match shutter finish
13. Same wall finish to the room to be applied to wall areas behind
Engineer's approval
6 DETAIL E6 Mortar Filling
DEVELOPMENTS
MAIN CONSULTANT :
wardrobes in that room.
14. No skirting to be provided to the walls covered by wardrobes.
15. Provide laminate on both sides of the shutter/ shelves and all the
1:2 Porcelain Tiles Skirting to
match floor finish and as
ARCADIA MIDDLE
exposed edges, color as per engr.'s approval PVC Laminate finish to EAST
40

Plaster finish as per specs per Engineer's approval

100

100
BUILT-IN WARDROBE DETAILS cupboard door with
AS PER SCHEDULE (H)

MEP CONSULTANT :
CARCASS concealed hinges finishes
18mm MDF board with face of melamine finish with pvc edges, finish match 4mm thick Melamine finish as/ Engineer's approval Provide sealant at base PIONEER Engineering Consultants

to doors. hardboard backing finish to Sand cement screed below as/ Engineer's approval ENGINEER
DOORS : PVC Laminate finish to match internal construction
18mm MDF board with face of pvc laminated finish including matching the wardrobe Floor finishes DRAWING TITLE :
lipping to all exposed edges, internal arrangements shall be as indicated
cupboard door with Provide plastic laminated
concealed hinges finishes Provide plastic laminated as/finishing schedule
in drawings. with post framed edge for
as/ Engineer's approval with post framed edge for refer also flooring
BACK BOARD :
4 mm thick Malamine finish hard board internal shelves/partition
internal shelves/partition detail WARDROBES DETAILS
CROSS BRACING :
MDF 18 mm thick, 100 mm height back facia on full length of wardrobes Provide plastic laminated
Structural slab

50
HANDLES : 100

50
long type stainless steel from "european origin" with post framed edge for Structural slab
HINGES : as/structural drawings
internal shelves/partition as/structural drawings
110°&170° opening,with 3-way millimetric adjustment."salici, blum"/approved Cross bracing: 18 mm
equivalent melamine finish (3 nos.)
HANGING RODS : DRAWN BY CHECKED BY APPROVED BY DATE
Oval shape chrome finish with chrome finish base support
ARCHITRAVES : L.N T.H B.J 03/02/2019
MDF 18 mm thick, 100 mm height back facia on full length of wardrobes
SKIRTING : Fair face RCC wall/flush JOB NO: SCALE : SIZE :
100 mm high skirting Ceramic Skirting to match floor finish pointed block wall 1013 As A1
MIRRORS :
6 mm thick with polished edges to be fixed from inside of doors. 1 no mirror construction behind
per wardrobes has to be provided wardrobe indicated
DISCIPLINE TYPE DRAWING NO. REVISION

5 DETAIL E5 4 DETAIL E4 3 DETAIL E3 2 DETAIL E2 1 DETAIL E1

A GEN G-5004 R0
1:2 1:2 1:2 1:2 1:2