NON-SKID ADHESIVE
(NSA)
T02 & T09
NON-SKID
ADHESIVE (NSA)
NON-SKID ADHESIVE FOR VITRIFIED
TILES, NATURAL STONES AND FOR
TILE-ON-TILE APPLICATION
Grey White
For Internal Tile on tile
Floor & Wall Application
For Tiles & Non-Slip
Natural Stone Adhesive
Polymer
Low VOC
Modified
Available in 5 kg, Available in 20 kg
20 kg & 30 kg pack. & 50 kg pack.
NON-SKID ADHESIVE
(NSA)
DESCRIPTION STANDARD COMPLIANCE/ SPECIFICATION
Roff Non-Skid Adhesive is a polymer modified, thin-set tile Roff Non-Skid Adhesive complies to the adhesion
adhesive for fixing ceramic, semi-vitreous tile, vitrified tiles requirements of IS 15477: 2004 Type 2 & IS 15477 : 2019 -
& natural stones of regular size. It is suitable for both vertical Type 1’T’ “Specification for Adhesives for use with
and horizontal surfaces, over the cementitious substrate Ceramic Tiles and Mosaics.”
for indoor application, in dry as well as wet areas. It is also
recommended for Tile on Tile Application.
AREA OF USE
Material to be fixed On surface/ substrate Area of application
All types of ceramic tile, Cement-based screeds & mortars, Flooring and walls,
terracotta, pavers, brick vitrified cement-based plasters/ renders, for internal applications
tiles, glass mosaic tiles, large concrete surfaces, bricks, AAC & external shaded area,
format tiles , precast terrazzo,
*
blocks, existing tiles & stones, external area*, dry & wet area,
marble & natural stones, low other cement-based surfaces. new construction & renovation,
thickness slabs, class Ia, Ib, IIa, domestic applications,
IIb & III tiles as per IS 13712 : 2006. commercial applications.
*For all exterior or large tiles/ stones installation, mix Roff Bond repair with Roff NSA. Consult with Roff technical team.
FEATURES AND ADVANTAGES LIMITATIONS
• Easy to use - just add water on site, ready to use. • Do not apply directly to gypsum plaster or
boards, fibre cement boards or other drywall
• Ideal product for tile-on-tile applications
partitions, plywood, chipboard, particleboard,
on floor.
decorative laminates or resilient flooring,
• Sag resistant formula: provides hassle-free metal, plastic, deformable surfaces or subject
application on vertical walls. to vibrations. Use Roff Powerflex/ Masterfix as
• Water resistant - suitable for wet areas. per application.
• Good adhesive bond strength & bonds to various • Adhesives for ceramic tile, bricks and stone are not
cement-based substrates. designed as replacements for waterproof coating.
Use Roff waterproofing coating before tiling for
• Low VOC - for healthy living.
wet area.
• Do not use for fixing artificial/ nano/ engineered
stone/ composites/ metal tile. Use Masterfix for
the same.
NON-SKID ADHESIVE
(NSA)
TECHNICAL INFORMATION
APPLICATION PROPERTIES
Testing Properties Test Results
Tentative Mixing Ratio Grey - 1 : 0.28 by weight
(Powder: Water) White - 1 : 0.32 by weight
Mixed Density 1.7 - 1.9 kg/ litre
Open Time (IS 15477: 2019) Approx. 20 minutes
Adjustability (IS 15477: 2019) Approx. 20 minutes
Pot Life Approx. 120 minutes
Tensile Adhesion Strength as per EN1348 ≥ 0.5 N/mm²
VOC Content (EPA 24) < 1.2 gm/ kg
Application Temperature (substrates and materials) 5°C to 35°C
Adhesive Thickness 3 - 12 mm
Setting/ Trafficable/ Grouting Time 24 hours
PERFORMANCE PROPERTIES AS PER IS 15477 : 2004 (TYPE 2)
Testing Properties Requirement Test Results
a) Shear Adhesion at Dry condition, 24 hours ≥ 4 KN 4 - 6 KN
b) Shear Adhesion at Dry condition, 14 days ≥ 10 KN 10 – 12 KN
c) Shear Adhesion at Heat ageing condition ≥ 5 KN 7 - 10 KN
d) Shear Adhesion at Wet condition ≥ 5 KN 9 - 12 KN
PERFORMANCE PROPERTIES AS PER IS 15477: 2019 (TYPE 1 ‘T’)
Testing Properties Requirement Test Results
a) Tensile Adhesion at Dry Condition ≥ 0.5 N/mm² 0.6 – 1 N/mm²
b) Tensile Adhesion at Wet condition - 0.6 – 1 N/mm²
c) Shear Adhesion at Dry Condition ≥ 1.0 N/mm² 1.1 – 1.5 N/mm²
d) Shear Adhesion at Wet condition - 1.0 – 1.4 N/mm²
e) Shear Adhesion at Heat Ageing - 1.2 – 1.5 N/mm²
f) Slip Resistance (T) ≤ 0.5 mm 0.3 – 0.5 mm
Note : Test results are indicative as per testing method specified in standard. Test results may vary as per substrate, site condition & testing machine etc.
Actual field performance will depend on installation methods and site conditions.
NON-SKID ADHESIVE
(NSA)
APPLICATION INSTRUCTIONS APPLICATION
SUBSTRATE PREPARATION • A
pply adhesive to the substrate with the flat side of
the trowel.
• The substrate must be level, cured, undamaged, compact,
rigid, resistant, dry and free from any debonding agents • Comb on additional adhesive with the notched side.
and from damp rising. • Use the proper sized notched trowel to ensure full
bedding of the tile.
• All surfaces must be plumb and true to within 6 mm in
10 ft (3m). • Tiles must be fixed within 15-20 minutes of adhesive
being applied, depending on the porosity of the surface
• Dry, dusty surfaces should be dampened with water & and atmospheric conditions.
excess water should be swept off.
• Check the adhesive ribs periodically and if a skin has
• New concrete slabs shall be damp cured and 28 days old formed, remove the dried adhesive and apply fresh
before application which will reduce the shrinkage from adhesive.
tile fixing surface. • Press the tiles firmly into position with a slight twisting
action, checking periodically that good contact is
• Expansion joints to be provided & filled with suitable
maintained with the back of each tile and beat in using
sealant.
rubber mallet to imbed tile and adjust level.
• Do not cover expansion joints with thin set tile
• Leave no voids behind tiles.
adhesive/ tile.
• For large size tiles or irregular surfaces, adhesive can
MIXING additionally be buttered on the backs of the tiles to
• Add 3 – 3.5 parts of powder to 1 part of water or ensure full adhesive contact.
5 - 6 litre water for 20 Kg powder in a clean mixing vessel. • Use suitable support along with adhesive for fixing tiles
on vertical surfaces.
• Adjust the water as per desired consistency.
• For highly absorbent natural stones which may form a
• Mix with a suitable mechanical stirrer or slow speed wet patch when adhesive is used, it is recommended to
drills (50 - 100 rpm) until a lump free homogeneous paste use suitable Roff Impregnating sealer on all sides. Please
is obtained. refer Technical Data Sheets of product intended for use
for specific instructions of use
• Always mix required quantity, which can be consumed
within pot life. • Leave adequate joints between individual wall and floor
tiles using Roff spacers. The joint width shall be as per the
• Leave mixture for 5 minutes before use. recommendation of architect / engineer.
• No further water should be added. • Clean off surplus adhesive from the tile face and
between joints.
• Clean tools and tile work with water while adhesive
is fresh.
NON-SKID ADHESIVE
(NSA)
PRECAUTIONS & NOTE PACKAGING
• Always add powder to water. • Grey – 5 kg, 20 kg & 30 kg bag
• Do not add excess water than recommended. • White – 20 kg & 50 kg bag
• Never add sand & cement at site.
SHELF LIFE
• Do not use on wet screed. Surface must be fully cured.
12 months for sealed pack when stored under cover, out
• Do not use the adhesive to correct surface irregularities of direct sunlight, dampproof condition and protect from
greater than 15 mm. extremes of temperature.
• Protect from direct rainfall/ foot traffic for at least
24 hours. GROUTING
• Leave gap between the tile & fill gaps with Roff tile grout. Grouting should be carried out after 24 hours of tiling.
Use the appropriate grouting material from Roff range of
• Designer/ applicator must evaluate the use of an
cementitious and epoxy grouts.
additional mechanical fastening system for extra
security for high height (such as steel hooks fastened
SAFETY PRECAUTIONS
to the substrate).
Keep out of reach of children. Wear suitable protective
COVERAGE clothing, gloves and eyes/face protection. After contact
with skin, wash immediately with plenty of clean water.
• Approx. 5 - 6 m²/ 20 kg Bag at 3 mm thickness
In case of contact with eyes rinse immediately with
(using 6 mm x 6 mm notch).
plenty of clean water and seek medical advice. Limited
• Approx. 7.5 - 8 m²/ 30 kg Bag at 3 mm thickness to professional use only.
(using 6 mm x 6 mm notch).
For more details please refer the relevant Material Safety
• Approx. 1.2 kg/ m² per mm of thickness. Data Sheet, available on request.
*Coverage will vary depending on trowel notch size, type, size of tile and
substrate smoothness and evenness.
CC-RF-TDS-NSA-DEC
Pidilite Industries Limited
Construction Chemicals Division, Ramkrishna Mandir Road, Post Box No. 17411, Andheri (E) Mumbai 400059 INDIA
Tel +91-22-2835 7000 Fax +91-22-2835 7008 • Website : www.roff.in • E-mail :
[email protected] • Toll Free No. 1800 22 5502
DISCLAIMER : While the company guarantees its products against defective materials, the use and application of these products are made without guarantee since the conditions of
their application are beyond its control. It is recommended to verify with the company that the product is suitable for the intended use, and that this Data Sheet version is the latest
one. The company may modify it without prior notice. Technical characteristics are listed for guidance only. For more information, please contact the company office in your location.
