Scribd
Upload
111 views2 pages

BK 5250

The BK5250 DeviceNet Compact Bus Coupler extends the Beckhoff Bus Terminal system with a cost-optimized and compact housing version. It supports up to 64 Bus Terminals and can connect up to 255 terminals with an extension. The coupler offers automatic baud rate detection up to 500 kbps and address selection switches. It includes a 5-pin fieldbus connector and provides power, input/output, and configuration capabilities for Bus Terminals.

Uploaded by

Julio Cesar Vazquez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
111 views2 pages

BK 5250

The BK5250 DeviceNet Compact Bus Coupler extends the Beckhoff Bus Terminal system with a cost-optimized and compact housing version. It supports up to 64 Bus Terminals and can connect up to 255 terminals with an extension. The coupler offers automatic baud rate detection up to 500 kbps and address selection switches. It includes a 5-pin fieldbus connector and provides power, input/output, and configuration capabilities for Bus Terminals.

Uploaded by

Julio Cesar Vazquez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

BK5250 https://www.beckhoff.

com/bk5250

BK5250 | DeviceNet Compact Bus Coupler

Configuration interface

Status display
fieldbus,
power LEDs
K-bus

Fieldbus connection
Bus Coupler
supply

Input for

power contacts

Address selector Power contacts

Address selector

Product status: Regular delivery

The Compact Bus Coupler BK5250 for DeviceNet extends the Beckhoff Bus Terminal system by a cost-optimized version in a
compact housing. Up to 64 Bus Terminals are supported; with the terminal bus extension, up to 255 Bus Terminals can be
connected. The DeviceNet Bus Coupler offers automatic baud rate detection up to 500 kbaud and two address selection
switches for address assignment. A 5-pin connector for the fieldbus connection is included in the scope of supply. Optionally,
the ZS1052-3000 connector with integrated terminating resistor can be connected.

Product information

Technical data

System data DeviceNet | BK5250

Number of I/O stations 64

Data transfer medium screened, twisted copper wire with power supply, 5-pin

Max. cable length 500 m 250 m 100 m

Data transfer rates 125 kbaud 250 kbaud 500 kbaud

Operating modes bit strobe, polling, cyclic, change of state (COS)

DeviceNet type communications adapter

Technical data BK5250

Number of Bus Terminals 64 (255 with K-bus extension)

Technical changes reserved


As of 03.03.2022
| Site 1 of 2
BK5250 https://www.beckhoff.com/bk5250

Max. number of bytes fieldbus 512 byte input and 512 byte output

Digital peripheral signals 1,020 inputs/outputs

Analog peripheral signals 256 inputs/outputs

Configuration possibility via KS2000 or the controller

Data transfer rates automatic detection

Bus interface 1 x open pluggable connector, 5-pin, included

24 V DC (-15 %/+20 %), through bus cable 11…25 V (conforms to DeviceNet


Power supply
specification)

Serial interface configuration interface

Diagnostics LED 2 x power supply, 2 x K-bus, 2 x fieldbus

Current supply K-bus 1750 mA

Power contacts max. 24 V DC/max. 10 A

Electrical isolation 500 V (power contact/supply voltage Bus Coupler)

Weight approx. 100 g

Operating/storage temperature -25…+60 °C/-40…+85 °C

Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27

EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4

Protect. rating/installation pos. IP20/variable

Approvals/markings CE, UL, ATEX

Ex marking II 3 G Ex nA IIC T4 Gc

Housing data BKxx50, BCxx50

Design form compact terminal housing with signal LEDs

Material polycarbonate

Dimensions (W x H x D) 44 mm x 100 mm x 68 mm

Installation on 35 mm DIN rail, conforming to EN 60715 with lock

Side by side mounting by means of double slot and key connection

Marking labeling of the BZxxx series

Wiring solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver

s*: 0.08…2.5 mm²,

Connection cross-section st*: 0.08…2.5 mm²,

f*: 0.14…1.5 mm²

Stripping length 8…9 mm

Current load power contacts I max: 10 A

*s: solid wire; st: stranded wire; f: with ferrule

Technical changes reserved


As of 03.03.2022
| Site 2 of 2

You might also like