Technical Data Sheet
Previous Name: Shell Tellus Oils
Shell Tellus S2 M 46 • Extra Protection
• Industrial Applications
Industrial Hydraulic Fluid
Shell Tellus S2 M fluids are high performance hydraulic fluids that use Shell’s unique patented technology to provide
outstanding protection and performance in most manufacturing and many mobile equipment operations. They resist
breakdown under heat or mechanical stress and help prevent damaging deposit formation that can decrease the
efficiency of your hydraulic power system.
Performance, Features & Benefits the oil is exposed to various influences with transport and
· Long fluid life – maintenance saving storage that could effect the cleanliness level), helps reduce the
impact of contaminants on filter blocking, allowing both
Shell Tellus S2 M fluids help extend equipment maintenance
intervals by resisting thermal and chemical breakdown. This extended filter life and use of finer filtration for extra equipment
minimizes sludge formation and provides excellent protection.
performance in the industry standard ASTM D 943 TOST test Shell Tellus S2 M fluids are formulated for fast air release
(Turbine Oil Stability Test), providing better reliability and without excessive foaming to help efficient hydraulic power
system cleanliness. transfer and minimise fluid and equipment impacts of cavitation
Shell Tellus S2 M fluids also have good stability in the induced oxidation that can shorten fluid life.
presence of moisture, which ensures long fluid life and reduces
Main Applications
the risk of corrosion and rusting, particularly in moist or humid
environments.
· Outstanding wear protection
Proven zinc-based anti-wear additives are incorporated to be
effective throughout the range of operating conditions, · Industrial hydraulic systems
With an extensive range of equipment maker approvals and
including low load and severe duty high load conditions.
recommendations, Shell Tellus S2 M fluids are suitable for a
Outstanding performance in a range of piston and vane pump
wide range of hydraulic power applications found in
tests, including the tough Denison T6C (dry and wet versions)
manufacturing and industrial environments.
and the demanding Vickers 35VQ25, demonstrates how Shell
Tellus S2 M fluids can help system components last longer. · Mobile hydraulic fluid power transmission systems
Shell Tellus S2 M fluids can be used effectively in mobile
· Maintaining system efficiency hydraulic power applications such as excavators and cranes,
Superior cleanliness, excellent filterability and high
except where significant ambient temperature variations are
performance water separation, air release and antifoam
encountered. For these applications we recommend the Shell
characteristics all help contribute to maintaining or enhancing
Tellus “V” series.
the efficiency of hydraulic systems.
The unique additive system in Shell Tellus S2 M, in · Marine hydraulic systems
Suitable for marine applications where ISO HM category
combination with superior cleanliness (meeting the
hydraulic fluids are recommended.
requirements of ISO 4406 21/19/16 class or better ex Shell
plant filling lines as recognised by DIN 51524 specification,
Page 1 of 3 - Shell Tellus S2 M 46, v 2
Specifications, Approvals & Recommendations Compatibility & Miscibility
· Denison Hydraulics (HF-0, HF-1, HF-2) · Compatibility
· Cincinnati Machine P-68 (ISO 32), P-70 (ISO 46), P-69 (ISO Shell Tellus S2 M fluids are suitable for use with most hydraulic
pumps. However, please consult your Shell Representative
68)
before using in pumps containing silver plated components.
· Eaton Vickers M-2950 S
· Eaton Vickers I-286 S · Fluid Compatibility
Shell Tellus S2 M fluids are compatible with most other mineral
· Listed by Bosch Rexroth Ref 17421-001 and RD 220-1/04.03
oil based hydraulic fluids. However, mineral oil hydraulic fluids
· ISO 11158 (HM fluids) should not be mixed with other fluid types (e.g. environmentally
· AFNOR NF-E 48-603 acceptable or fire resistant fluids).
· ASTM 6158-05 (HM fluids) · Seal & Paint Compatibility
· DIN 51524 Part 2 HLP type Shell Tellus S2 M fluids are compatible with seal materials and
paints normally specified for use with mineral oils.
· Swedish Standard SS 15 54 34 AM
· GB 111181-1-94 (HM fluids)
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Helpdesk, or the OEM Approvals website.
Typical Physical Characteristics
Properties Method Shell Tellus S2 M
ISO Viscosity Grade ISO 3448 46
ISO Viscosity Grade ISO 3448 46
ISO Fluid Type HM
ISO Fluid Type HM
Kinematic Viscosity @0°C cSt ASTM D 445 580
Kinematic Viscosity @0°C cSt ASTM D 445 580
Kinematic Viscosity @40°C cSt ASTM D 445 46
Kinematic Viscosity @40°C cSt ASTM D 445 46
Kinematic Viscosity @100°C cSt ASTM D 445 6.7
Kinematic Viscosity @100°C cSt ASTM D 445 6.7
Viscosity Index ISO 2909 98
Viscosity Index ISO 2909 98
Density @15°C kg/l ISO 12185 0.879
Density @15°C kg/l ISO 12185 0.879
Flash Point (COC) °C ISO 2592 230
Flash Point (COC) °C ISO 2592 230
Pour Point °C ISO 3016 -30
Pour Point °C ISO 3016 -30
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in these characteristics
may occur.
Health, Safety & Environment
· Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Page 2 of 3 - Shell Tellus S2 M 46, v 2
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 3 of 3 - Shell Tellus S2 M 46, v 2
