1- The primary reasons for 5- A patient who wears a

obtaining the most extensive complete maxillary denture

area coverage for a complains of buring sensation
mandibular complete denture in the palatal area this
are : indicative of too much
a) Provide balancing occlusion and pressure being exerted by
to increase the tongue space. denture on the:
b) To increase the capacity of the a) Incisive foramen
underlying structure to withstand b) Palatal mucosa
the stress due to biting force and c) Hamular notch
to improve the appearance. d) Posterior palatal seal
c) To increase the capacity of the
underlying structure to
withstand the stress due to
biting force and to improve
seal. 6- The First step in the
d) All of the above.
treatment of abused tissue in
2- The new Complete Denture
patient with existing dentures
should be evaluated after :
is to:
a) 24 hours of delivery
a) Fabricate a new set of dentures
b) One week of deliver
b) Reline the dentures
c) No evaluation
c) Educate the patient
d) One hour after deliver
d) Excise the abused tissue
7- The incisal edges of the
maxillary anterior teeth
should just touch the wet/dry
3- Posterior teath are set edge to line of the lower lip when
edge may cause: enunciating which sounds:
a) Gagging Reflex a) Linguoalveolar sounds such as
b) Cheek biting s,z
c) Reduce the taste b) Fricative or labiodental sounds
d) Speech deficulties ( f , v or ph)
4- Maxillary anterior teeth c) b , p , m sounds
arranged : d) linguodental sounds such as (that
a) Facial to the ridge or those)
b) Exactly on the ridge
c) Ligual to the ridge
1
8- the primary role of anterior b) Overextention of the tray
teeth on dentures is: c) Thick borders
a) to incise the food d) Thin borders
b) occlusion 13- A generalized speech
c) esthetics difficulty with complete
d) stability of denture denture caused by:
9- The primary indicator of the a) Faulty tooth position
accuracy of border molding b) Faulty palatal contour
is: c) All of the above
a) Adequate coverage of the tray d) None of the above
borders with the material used
for border molding
b) Stability and lack of
displacement of the tray in the
mouth
c) Uniformly thickness of the
border
d) None of the above 14- At the first appointment
10- The primary stress bearing after insertion of complete
area of the maxillary arch is: dentures, the presence of
a) Residual ridge generalized soreness on the
b) Rugae area crest of the mandibular ridge
c) Maxillary tubrosity
is most likely due to:
d) Torus palatinus
a) The newness of the denture
11- overextented distobuccal b) Defective tissue registeration
corner of the mandibular c) Premature occlusal contacts
denture will punch against d) Incomplete Polimarization of
wich mucles during function: denture material
a) Bucsinator muscle 15- The inferior surface of
b) Zygomaticus muscle maxillary occlusal rim should
c) Masseter muscle be parallel to:
d) Temporalis muscle a) Camper’s line
12- After border molding the b) Franfort line
mandibular custom tray, it is c) Horizontal condylar inclination
important to check for d) Fox plan
dislodgement in order to 16- The major disadvantage of
detect areas of: immediate denture is:
a) Underextention of the tray a) increase of post insertion care

2
 b) increase of soreness c) Unilateral distal extension
c) not being able to have an removable partial denture
anterior tooth try-in to evaluate d) None of the above
esthetics 20- The major connector is:
d) high cost a) The connecting tang between the
17- The posterior palatal seal denture and other components of
for a maxillary denture: the prosthesis.
a) is placed 3 mm posterior to b) The part of the denture base
vibrating line which extend from the neck of
b) is not necessary when fabricating the tooth to the border of the
a complete denture on the patient denture
with a flat palate c) The unit of the partial denture
c) will vary in outline and depth base that connects the parts of
according to palatal form of the prosthesis located on one
the patient side of the arch with those
on the opposite side
21- A mandibular lingual bar
18- Which of the following major connector requires a
landmarks are relevant to minimum of :
location of posterior palatal a) 3 mm of vertical height between
seal: the gingival margin and the floor
a) hamular notchs of the mouth
b) vibration line b) 5 mm of vertical height between
c) fovae palatine the gingival margin and the floor
d) all of the above of the mouth
19- How would you classify a c) 9 mm of vertical height between
the gingival margin and the floor
removable partial denture in
of the mouth
which a portion of the
d) 7 mm of vertical height between
functional load is carried by the gingival margin and the
the residual ridge at one end floor of the mouth
of the denture base segment 22- The type or form of the
while the othe end of the base clasp is chosen after:
segment is supported by a) Looking the x-ray
natural teeth ? b) Talking to the patient
a) Tooth –born removable partial c) Surveying the cast
denture d) The initial metal try-in of the
b) Bilateral distal extension frame work
removable partial denture
3
23- Occlusal approach clasps c) Balancing occlusion
are originate: d) Contact areas of the proximal
a) Below the height of contour teeth
b) Above the height of contour 28- The cingulum rest is usually
c) Above the 0.08” undercut confined to preparation on :
d) None of the above a) Maxillary canine
24- All of the following are b) Maxillary lateral incisors
advantage of infrabulge c) Mandibular canine
d) Mandiular lateral incisors
retainers as compared to
suprabulge retainers except:
a) Less bothersome to the
vestibular tissues
b) Less prone to caries
c) Esthetically superior in most cases
d) Cleaner 29- The retentive clasp arm
25- Which of the following should be passive until a
Kennedy classes is tooth – dislodging force is applied. In
born : a clasp only the tip of the
a) Class I retentive arm should be
b) Class II flexible and the other
c) Class III
components are rigid.
26- What is the recommended a) Both statement are wrong
treatment for patient who has b) Both statement are true
lost her four maxillary c) The first statement is wrong and
incisors some time ago and the second is true
has suffered excessive ridge d) The first statement is true and the
second is wrong
resorption:
a) Six unit fixed bridge 30- Which of the following is
b) No treatment defined as “ the quality of the
c) Removable partial denture restoration to be firm , steady
d) Maryland bridge , constant and not subject to
27- In the mesial rest, guide change of position when force
plane and I-bar design, are applied”
reciprocation is achieved by a) Adhesion
all of the following except : b) Stability
a) Rigid plating c) Reciprocation
b) Minor connector d) Support

4
31- A patient of yours walks abutments by virtue of the low
into your office with the central loading at the base of the
attachment
following complaint. “When I
d) all of them are advantages
smile , my upper denture does
34- The size of the posterior
not hold.” Which of the
teeth for the removable
denture base needs to be
partial denture is determined
adjusted?
primarily by which two of the
a) Distobuccal flange
b) Buccal notch and buccal following:
vestibule a) the lip line of the patient
c) Labial notch and labial flange b) age of the patient
d) None of the above c) the characteristics of the
denture supporting tissues
d) face bow transfer
35- Class IV kennedy classification
32- Free end saddles are liable
a) bilateral edentulous area located
to be displaced under occlusal posterior to the remaining natural
pressure (antero-posterior teeth
rocking around the abutment b) unilateral edentulous area located
tooth, due to the highly posterior to the remaining natural
teeth
displacable soft tissue which
c) a single but unilateral ( crossing
imprssion technique is
the midline) edentulous area
employed to try and prevent located anterior to the remaining
this kind of movement: natural teeth
a) anatomic impression technique d) unilateral edentulous area located
b) altered cast technique posterior to the remaining natural
c) No matter which technique is teeth
chosen 36- Bilateral edentulous area
d) Either technique could be used present posterior to the
33- All of the following are remaining teeth can be classified
advantages of precision as kennedy :
attachment restorations a) Class I
Except : b) Class II
a) provide retention without display c) Class III
of metal d) Class IV
b) easy to repair 37- If the third molar is absent
c) the functional load is dispersed and not to be replaced :
down the long axis of the

5
 a) It is not considered in the 43- The patients had previous
classification denture experience. They feel
b) It is may or may not be considered
that they can adapt to
c) None applies
d) It is considered important in the anything new. He will
classification cooperate with the dentist
38- Removable partial denture and will usually experience
is indicated in: satisfaction in treatment.
a) Long edentulous area a) Pilosophical patient
b) Excessive loss of alveolar process b) Hysterical patient
c) Distal abutment loss c) Exacting patient
d) All of the above d) Indifferent patient

44- They are emotionally

39- Advantage of The U-shaped
unstable, nervous and
major connector is increased:
a) Rigidity apprehensive. Psychiatric
b) Support help is needed for the success
c) Stability in treatment of this patient.
d) None of the above a) Pilosophical patient
40- The most rigid major b) Hysterical patient
connector is : c) Exacting patient
a) A-P palatal strap d) Indifferent patient
b) A-P palatal bar 45- ………… is / are solution/s
c) Palatal plate for weak abutments:
d) Anterior palatal starp a) Extraction
41- The ideal denture base b) Splinting
should not have: c) Restoration
a) Sufficient strength d) All of the above
b) Dense and non-irritating surface 46- Clicking of denture teeth
c) High specific gravity during mastication :
d) Esthetically accepted a) The presence of porcelain teeth
42- The first step of the b) Low vertical dimensions
diagnosis is: c) High vertical dimension
a) Extra oral examination d) A&C
b) Intraoral examination 47- Clicking of the denture
c) Patient interview during insertion is due to:
d) Cast analysis

6
 a) Flexible retentive tip is inserted
periodontal lesions, pocket
on the undercut below the survey
line formation and caries.
b) Flexible reciprocal arm is inserted a) true
on the undercut below the survey b) false
line c) may or may not
c) Rigid reciprocal arm is inserted 51- A complete radiographic
on the undercut below the survey of the remaining teeth
survey line and edentulous areas is not
d) All of the above
important is partial denture
cases.
a) true
b) false
48- Thick, ropy saliva produces c) may or may not
poor retention and difficulties
52- Good abutment must have:
during impression. Serous,
a) Low C/R ratio
moderate amount of saliva is b) High C/R ratio
necessary for denture
retention and oral hygiene.
a) both are correct
b) both are wrong
c) the first statement is correct and
the second statement are wrong
d) the first statement is wrong and
the second statement is correct
53- The maxillary ridge consists
49- The depth of the lingual
of compact bone, covered by
sulcus influences the selection
soft tissue that is loose,
of the mandibular major
delicate in nature.
connector. a) True
a) true b) False
b) false
54- The broader the coverage of
c) may or may not
the denture foundation, the
50- Loss of contact between greater the distribution of
neighboring teeth is a load/ per unit area.
a) True
predisposing factor to
b) False

7
 55- The physiologic impression 58- The type of denture Base
technique which performed distal to the upper left second
at finished denture stage is premolar is:
called: a) Combined Denture Base
a) Altered cast technique b) Metallic Denture Base
b) Relining c) Both are the same
c) Mclean’s technique d) None of the above
d) Hindel’s Technique 59- The Type of Denture Base
distal to upper right first
premolar is:
a) Combined Denture Base
b) Metallic Denture Base
c) Both are the same
d) None of the above
60- The acrylic part of the
denture base at the left side
attached to the metal frame
work by:
a) Ladder shaped frame work
b) Mish work shaped frame work
c) Metal Pins
d) a or b
Choose the Correct Answer 61- At this case the Indirect
according this case : Retention is or are:
a) Cingulum Rest at right canine
56- According Kennedy b) Cingulum Rest at Left canine
classification this case was c) Extension of Major Connector at
classified: Rugae area
a) Class II d) No need for Indirect Retention At
b) Class III this case due to tripoding
configuration
c) Class I modification 2
62- The major connector of
d) None of the above
57- At this case The Designed choice is:
Partial Denture was: a) Middle strap
a) Tooth Born
b) Anterior strap
b) Tooth – Tissue Born c) Posterior bar
c) Both
d) Non of the above
8
63- If there is large torus b) RPI
palatinus extended c) RPA
d) a or c
posteriorly, the major
67- At the right side, the clasp/s
Connector is:
could be used at the last
a) Anterior strap
b) Posterior bar molar:
a) Ring Clasp
c) Middle strap
b) Aker Clasp
d) All of the above c) Extended Clasp
d) A or b

68- At the anterior abutment at

the right side, If there is not
64- The type of the clasp for
Buccal undercut, the Clasp
retention at Left second
could be used:
premolar when the undercut
a) Create an undercut buccally and
is located at mesiobuccal area
Aker clasp could be used
is:
b) Aker Clasp
a) Aker Clasp
c) Wrought wire clasp
b) Double Aker clasp
c) RPI clasp d) All of the above
d) All of the Above Choose the correct answer
65- The type of the clasp/s for according to the Case:
retention at Left second
premolar when the undercut
is located at disto buccal area
is:
a) Reverse Aker
b) RPI 69- According Kennedy
c) Aker Clasp classification this case was
d) All of the Above classified:
66- If there is sever bony a) Class II
under cut, the clasp/s could b) Class III
c) Class I modification 2
be used at left second
70- The type of denture Base
premolar :
a) Reverse Aker could be used

9
 a) Combined Denture Base edentulous ridge, the
b) Metallic Denture Base material of teeth could be:
c) Both are the same a) Acrylic teeth
d) None of the above b) Porcelain teeth
71- At this case the Indirect c) Metal teeth
Retention is or are: d) None of the above
a) Cingulum Rest at right canine
b) Cingulum Rest at Left canine
c) No need for Indirect
Retention
72- The major connector of
choice if the distance between
gingival margin and the floor
of the mouth 3 mm:
a) Lingual bar
b) Lingual plate
c) Labial bar
d) Swing lock
73- The major connector of
choice if the lower incisors
are lingual inclined severely :
a) Swing lock
b) Lingual bar
c) Lingual plate
d) All of the above
74- The type of the clasp for
retention at right abutment
when the undercut is located
at mesiobuccal area is:
a) I bar gingival approach clasp
b) Aker clasp
c) Extended clasp
d) All of the above
75- To Decrease the stress
applied on the right

10
11