AssociatedElectrics.

com
2
:: Introduction
Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and
maintaining your new Kit. Please take a moment to read through this manual to help familiarize yourself with these steps.
We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the
illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags.
Check each bag for these sheets before you start to build.
:: KIT Features
Features in the RC8B3.2e Kit:

• New suspension arm design with inserts for flex adjustments

• Longer rear suspension arm length with narrow rear arm mounts

• New stiff shock bladder design improves jumping and handling performance

• Updated shock cap works for bladder or emulsion style shock setups

• Shorter and lower front bumper reduces drag and allows easier access to anti-roll bar screws

• I.F.M.A.R. approved rear wing

• 42T ring and 12T pinion gears on front and rear differentials for improved gear ratios

• Updated chassis with chamfered front edges to reduce drag

• Side guards are now threaded into the chassis from the top side of the car

• Two-piece sliding motor mount for easy gear mesh adjustment and motor removal

• 90% parts compatibility with RC8B3.1e

:: Additional
Your new RC8B3.2e Kit comes as a kit. There are some items you will need to complete your kit (refer to catalog for suggestions):

• 2 or 3 channel radio/transmitter - /2.4GHz recommended • Transmitter batteries

• 1/8th scale sized motor (#27405, #27406) • 1/8th scale sized ESC (#27007)
• 4s LiPo Battery Pack (#27341, #27342) • Polycarbonate-specific paint
• Steering servo - (#27101, #27115) • Thread-locking compound - (#1596)
• 1:8 scale buggy tires • 1:8 scale buggy wheels • CA (cyanoacrylic) glue - (#1597)
• Needle-nose pliers • Hobby knife • Reamer / hole punch • Ride height gauge

:: Other Helpful Items

• Silicone Shock/Diff Fluids (Refer to catalog for complete listings) • Body Scissors (AE #1737)
• Shock Pliers - (#1675) • FT Hex Wrenches - (#1518) • FT Hex Wrenches / Nut Drivers - (#1519)
• Reamer / Hole Punch - (#1499) • Wire Cutters • Calipers or a Precision Ruler
• Ride Height Gauge - (#1449) • Turnbuckle Wrench - (#1114) • Wheel Nut Wrench 17mm - (#1571)
• FT 5.0mm Hex Driver - (#1506) • Scissiors - (#1737)

Associated Electrics, Inc. Customer Service

21062 Bake Parkway. Tel: 949.544.7500
Lake Forest, CA 92630 Fax: 949.544.7501
www.AssociatedElectrics.com · https://twitter.com/Team_Associated · www.instagram.com/teamassociatedrc/ · www.facebook.com/TeamAssociated/
 3
:: Hardware - 1:1 Scale View
Flat Head (fhcs) Button Head (bhcs) Set Screws
2.5x6mm (4675) 2x4mm (91492) 3x3mm (25225)

2.5x8mm (31448) 2.5x6mm (31520) 3x6mm (81257)

3x6mm (31541) 2.5x8mm (31521) 3x10mm (4671)

3x8mm (25201) 2.5x18mm (81259) 3x12mm (81258)

Titanium (91592)

3x6mm (31531) 4x4mm (7732)

3x10mm (25202) Titanium (91580)
Titaniuim (91593)
5x4mm (89221)
3x10mm (25211)
3x12mm (25203)
Titanium (91594) Ball Bearings
3x14mm (25187)
Titanium (91584) 5x8x2.5mm (8680)
3x14mm (89208)
Titanium (91595) 3x16mm (89203)
Titanium (91585)
5x10x4mm (91560)
3x30mm (89212) 3x20mm (25188)

3x24mm (89204)
4x10mm (81262) Titanium (91589) 6x10x3mm (31404)

4x14mm (81260)
4x12mm (89214)
6x12x4mm (91561)
4x16mm (81261)
4x14mm (89217)

4x16mm (81263) 8x16x5mm (91564)

4x20mm (81264)

8x16x5mm flanged
(91565)

Nuts (lock/plain) Washers / Shims

15x21x4mm (91566)
M2.5 LockNut, Silver (89215) 5.5x0.5mm (31381)

M3 Nut (91477) 5.5x1.0mm (31382)

M3 Alum. Locknut, Blue (31550)
M3 Locknut, Black (25215) 5.5x2.0mm (31383)
Socket Head (shcs)
M3 Locknut w/Flange (25612) 2.6x6mm Washer (89278)
FT 3mm Locknuts, Blue(25392) 2x5mm (31511)
Bulkhead Washers
7.8x2.0mm, Blue (31386) 2x16mm (7184)
M4 Locknut (89216)
FT M4 Locknut, Blue (31551) 3x8mm Washer (89218) 3x8mm (89223)
M4 Locknut, Serrated (91738)

3x10mm (25620)

3x24mm (89225)
4
:: Table of Contents
1................... Cover 16 - 18.........Rear End Build
(Bag 7.1, 7.2, 7.3)

2................... Introduction
19.................Rear Hubs Build
(Bag 8.1, 8.2)
3................... 1:1 Hardware “Fold Out”

20................Center Bulkhead Build

4................... Table of Contents (Bag 9.1, 9.2)

5 - 7..............Differentials Build 20 - 21.......Battery Tray Build

(Bag 1.1, 1.2) (Bag 10.1, 10.2)

7 - 8..............Shocks Build 22................Receiver Box Build

(Bag 2.1) (Bag 11.1, 11.2)

9....................Turnbuckles Build 23................Wheels / Tires / Body

(Bag 3.1, 3.2) (Misc.)

10 - 11.........Steering / Chassis Build 24 - 33....... Droop Settings / Catalog

(Bag 4.1, 4.2)

34................ Back Cover

11 - 14........Front Gearbox Build
(Bag 5.1, 5.2, 5.3)

14 - 15........Steering Blocks Build

(Bag 6.1, 6.2)

:: Notes

This symbol indicates a special

! note or instruction in the manual.

There is a 1:1 hardware foldout page in the

front of the manual. To check the size of a part,
line up your hardare with the correct drawing
This symbol indicates a Racers Tip. until you find the exact size. Each part in the
foldout has a number assigned to it for ordering
replacement parts.

Associated Electrics, Inc. Customer Service

21062 Bake Parkway. Tel: 949.544.7500
Lake Forest, CA 92630 Fax: 949.544.7501
www.AssociatedElectrics.com · https://twitter.com/Team_Associated · www.instagram.com/teamassociatedrc/ · www.facebook.com/TeamAssociated/
3/21 5
:: Differential Build (Front and Rear) - Bag 1.1, 1.2 - Step 1
81380
88 81385

!
#65 ease Diff Sun
bla
c k gr Outdrive
81380 Gear, 20T,
O-Ring
Pin HTC
5.8x1.9mm Set aside 13x15.8mm
81379 2.5x12mm shims until diff install
Diff 91564
Case 8x16x5
Bearing

81381 81012
Diff Shim 17mm
6x8x0.20mm Outdrive,
Front Diff

bla
c k
88
#65 ease
gr
81008
15mm
Outdrive,
!
Align pin with
Rear Diff groove in sun gear

:: Differential Build (Front and Rear) - Bag 1.1, 1.2 - Step 2

81381 x4
Diff Shim
3.6x12x0.12mm
81380 x4
Diff Planet
Gear, 10T,
81380 x2 HTC
Diff
Crosspin
Racer’s Tip:
You can use #81385 planet o-ring
between the planet gears and the
diff shims as a tuning option.
Do not install 3.3x1.5mm planet
o-ring for kit setup.

:: Differential Build (Front and Rear) - Bag 1.1, 1.2 - Step 3

81385 81380 81380
88
#65 ease Outdrive Pin Diff Sun
k gr
bla
c
O-Ring 2.5x12mm Gear, 20T,
5.8x1.9mm HTC

81009 91564
Diff Ring 8x16x5
Gear, 42T Bearing

81381 81012
Diff Shim 17mm
6x8x0.20mm Outdrive,
Front Diff
88

!
#65 ease
bl a c k gr 81008
15mm
Outdrive, Align pin with
Rear Diff groove in sun gear
 6
:: Differential Build (Front and Rear) - Bag 1.1, 1.2 - Step 4
81384
Diff
!
89208 x4
Gasket 3x14mm
FHCS
Racer’s Tip:
88 Use black grease
#65 ease
c k gr (#6588) to coat
bl a
the diff gasket
before installation!
Diff
Flui
d

Front Diff Fluid:

Racer’s Tip: 5,000cst #5453
Fill diff above the cross
pins, below the planet Rear Diff Fluid:
gears as shown.
5,000cst #5453

:: Differential Build (Center) - Bag 1.1, 1.2 - Step 5

81380
88 81385
#65 ease Diff Sun
bla
c k gr Outdrive
81380 Gear, 20T,
O-Ring
Pin HTC
5.8x1.9mm
81379 2.5x12mm
Diff 91564
Case 8x16x5
Bearing

81381
Diff Shim 81012
6x8x0.20mm 17mm

!
Outdrive,
88
#65 ease
gr
Center Diff
c k
bla
Align pin with
groove in sun gear

:: Differential Build (Center) - Bag 1.1, 1.2 - Step 6

81381 x4
Diff Shim
3.6x12x0.12mm
81380 x4
Diff Planet
Gear, 10T,
81380 x2 HTC
Diff
Crosspin
Racer’s Tip:
You can use #81385 planet o-ring
between the planet gears and the
diff shims as a tuning option.
Do not install 3.3x1.5mm planet
o-ring for kit setup.
 7
:: Differential Build (Center) - Bag 1.1, 1.2 - Step 7
88
81385 81380
#65 ease
gr Outdrive Diff Sun
lack
b
O-Ring 81380 Gear, 20T
5.8x1.9mm Pin
2.5x12mm

81389
91564
B3.1e
8x16x5
Plastic Spur
Bearing
Gear, 46T
81381
Diff Shim 81012
6x8x0.20mm

!
17mm
88
Outdrive,
#65 ease
ck gr Center Diff
bla Align pin with
groove in sun gear

:: Differential Build (Center) - Bag 1.1, 1.2 - Step 8

81384
Diff
Gasket ! 89208 x4
3x14mm
FHCS
Racer’s Tip:
Use black grease
88 (#6588) to coat
#65 ease
g r the diff gasket
lac k
b
before installation!

Diff
Flui
d

Racer’s Tip:
Fill diff above the cross Center Diff Fluid:
pins, below the planet
5,000cst #5453
gears as shown.

:: Shocks Build - Bag 2.1 - Step 1

81200 89215 81160
Shock Piston 2.5mm Shock Shock Body,
(8x1.2 tapered) Piston Locknut
!
Set aside shock pins
30.5mm
(Front)

81161
! 89278 x2 and M3x6mm set
screws until shock 81185 Shock Body,
2.6x6mm installation Shock Body 39.5mm
Washer
Install pistons O-Ring (Rear)
taper down 81170
TiN Shock Shaft, 81185 81186 x2
3.5x30.5mm O-Ring Hat Shock
(Front) Bushing O-Ring

81173 81188 81185

TiN Shock Shaft, Shock Body O-Ring
3.5x42.5mm Seal Spacer
(Rear) Retainer
 8
:: Shocks Build - Bag 2.1 - Step 2
81181
Shock Cap
81452 Insert
Racer’s Tip: RC8B3.2
Use green slime Shock Cap 91492
(#1105) to
lube the o-rings
2x4mm
before installation! BHCS
91492
81190

!
Gasket
Shock
Boots 81453
Bladder, When installing the
81194 Stiff shock bladder, make
sure it is correctly
Shock seated within the
Rod End shock cap as shown.
and Ball

:: Shocks Build - Bag 2.1 - Step 3

k
oc

!
sh id
flu

! Compress shock shaft fully.

!
Leave a gap Let shock fluid bleed from
when bleeder screw hole, then
installing the tighten the screw.
Fill to top of shock cap.
shock body. For more rebound, do not
compress shock shaft as far
Front Shock Fluid: before tightening the
35wt #5429 shock cap.

Rear Shock Fluid:

30wt #5422

:: Shocks Build - Bag 2.1 - Step 4

81221
Spring
Collar O-Ring,
20mm 81194

!
Spring
81221 Cup,
Spring 20mm
The springs come with
a colored marking Collar, 20mm
pre-installed for easy
identification
k
oc 81225
sh id
f l u
V2 Front Spring,
Blue (5.50lb/in)

81231
V2 Rear Spring,
Blue (4.30lb/in)
 9
:: Turnbuckles Build - Bag 3.1, 3.2 - Step 1
Steering Servo Turnbuckle
1401 91469 x2
33mm Ball Cup
Turnbuckle

!
Set aside until page 22

11.50mm (0.45”)

:: Turnbuckles Build - Bag 3.1, 3.2 - Step 2

Steering Turnbuckle
81397 x2

81093 89526
Turnbuckle
Ball, !
Note the direction of
Rod End, 4x50mm Shouldered
turnbuckle ball
4mm, Turnbuckle
Offset 81093
Rod End,

!
4mm

25.00mm (0.98”) Set aside until page 15

Left Turnbuckle Right Turnbuckle

:: Turnbuckles Build - Bag 3.1, 3.2 - Step 3

Rear Hub Turnbuckle
81397 89269 81398 81094
Turnbuckle
Ball,
Shouldered
Steel
Turnbuckle,
5x38mm
Turnbuckle
Ball,
Shouldered
Rod End,
5mm,
Offset
!
Set aside until page 19

81094
Rod End,
5mm
16.00mm (0.63”)
Right Turnbuckle

Left Turnbuckle
10
:: Steering / Chassis Build - Bag 4.1, 4.2 - Step 1

81431 31540 x8 81091 x2

RC8B3.2 3x5mm Steering
Side FHCS Post
Guards

25201 x2
Loosely attach
3x8mm 3x5mm FHCS and
FHCS then install 3x8mm
FHCS. Tighten after
all screws are installed
81460
RC8B3.2e
Chassis
81262 x2 #1596
4x10mm thread lock

FHCS (not included)

:: Steering / Chassis Build - Bag 4.1, 4.2 - Step 2

81084
Servo
Saver
Tube
Racer’s Tip: 81084 x2
Use black grease 81083 Servo Saver
(#6588) to lube
Servo Tube Shim
the bellcrank halves
before installation! Saver
Spring

81086 88
#65 ease
Steering gr
ck
bla
Bellcrank
81084
81086 Servo Saver
Servo Tube Spring
Saver Arm Nut & O-Ring

:: Steering / Chassis Build - Bag 4.1, 4.2 - Step 3

31404 x4
6x10x3mm
Bearing

81086
Steering
Bellcrank

1.5mm 8680 x4
5x8x2.5mm
Bearing
 11
:: Steering / Chassis Build - Bag 4.1, 4.2 - Step 4
81088 x2
Steering
Bellcrank
Nut

81089
Steering
Rack

25201 x2 #159
6
k
d loc
3x8mm threa

FHCS (not included)

:: Front Gearbox Build - Bag 5.1, 5.2, 5.3 - Step 1

91561 x2
81015 6x12x4mm
! Gearbox,
(Inboard)
Bearing
(not included)

ck
ad 96
Set aside front bumper,

lo
re 5
th #1
rear chassis brace, 89221
and rear body post
until rear gearbox build
5x4mm
steps. Set Screw

81009
Diff Pinion 81020
Gear, 12T Center
Universal,
(76mm)
81015
Dust Cap 4675
2.5x6mm
FHCS

:: Front Gearbox Build - Bag 5.1, 5.2, 5.3 - Step 2

NOTE:
Install the front diff
(17mm outdrives).
81381 x3 Step 1:
Diff Shim
13.5x15.8x0.20mm ! 88
Add shims on the ring gear
side to TIGHTEN gear mesh.
Subtract shims on this side
STEP 1 #65 ease
gr
to LOOSEN gear mesh.
c k
81015 bl a

Gearbox, Step 2:
Add or subtract shims here
25620 x2 (Outboard)
to finalize diff side to side
3x10mm play once gear mesh is
SHCS set from Step 1.
Recommended diff side to

!
side clearance (gearbox
assembly) 0.10 - 0.25mm.
81015 81259
Anti-Roll STEP 2 Notes:
2.5x18mm 0.1mm shim can be used for
Bar Cap BHCS fine tuning of gear mesh
12
:: Front Gearbox Build - Bag 5.1, 5.2, 5.3 - Step 3
Kit Setup: 81438 Build left and
Front Arm,
Lower right side!

!
81292
Use 2x 3x8mm BHCS only
on the inside of the front 89317
!
Take care not to
RC8B3 Arm lower suspension arm. Droop overtighten
Mount B, Screw insert screws.
HRC Do not overtighten!
81050 x2 Droop Screw: 81438
Arm Mount Kit Setup: Front Arm
4.0mm 31532 x2 Insert,
Insert,
Center
3x8mm
BHCS
Lower !
81260 x2 Note that each arm is
25201 x3 marked with a R for the
4x14mm 3x8mm Right arm or an L for
BHCS FHCS the Left arm.

:: Front Gearbox Build - Bag 5.1, 5.2, 5.3 - Step 4

Kit Setup: 81150
81150 x2
Anti-Roll
Anti-Roll
Bar Pivot
Bar Rod
81446 x2 End
Suspension
Arm Shim 81258
81291
RC8B3 3x12mm
Arm Mount Set Screw
A, HRC
81060 x2 81150
Hinge Rod End
Pin Ball
81260 x2 81050 x2 1.5mm
4x14mm Arm Mount
BHCS Insert, Center

:: Front Gearbox Build - Bag 5.1, 5.2, 5.3 - Step 5

81257 x2 !
! 3x6mm
Set Screw
Note direction

Left Side Right Side

Anti-Roll Bar Pivots:
Offset the anti-roll bar
rod ends 81197 x2
(approximately 45 degrees). Shock
Pin
 13
:: Front Gearbox Build - Bag 5.1, 5.2, 5.3 - Step 6
81130

! (Front) Anti-Roll
Bar, 2.3mm
Center the anti-roll
bar collet on the anti-
roll bar, then tighten
the 3x3mm set
screw.

(not included)
81150
! th #15
re
ad 96
lo
ck
Anti-Roll
Bar
Front anti-roll
bar gap: 2.0mm
Collet

25225
3x3mm
Set Screw

:: Front Gearbox Build - Bag 5.1, 5.2, 5.3 - Step 7

Tighten 3x6mm set screws
just enough to still allow the 81447

! anti-roll bar to move freely.

(not included)
#159
6
89214
4x12mm
FHCS
Body Post,
Front
threa
d lock 81030
25225 x2 Top Plate
3x3mm
Set Screw
96
#15 ock 89216
ad l
thre M4
31521 x2 Locknut
(not included)
25201
2.5x8mm
3x8mm
BHCS
FHCS
81032
81257 x2 Chassis
3x6mm Brace,
Set Screw Front

:: Front Gearbox Build - Bag 5.1, 5.2, 5.3 - Step 8

(not included)
Kit Setup: 25201 x2 89214 x2 81050 x2
3x8mm 4x12mm 89225 x2 Arm Mount
6 k
FHCS FHCS 3x24mm 59 loc Insert,
#1 ad
SHCS th
re Center
th #1
re 59
ad 6 54
lo
ck
32
1
(not included)

81050 x2
Arm Mount
Insert,
Center

81196 x2 81026
81049 Shock Shock Tower,
Upper Link Bushing Front
Mount
14
:: Front Gearbox Build - Bag 5.1, 5.2, 5.3 - Step 9
Build left and right side!
25201 x5
3x8mm
FHCS ! ! 81446
Caster Clip,
Use included extra clips 0.9mm
to finish shimming upper
Take care not to
arm. Start with 1x2.0mm
overtighten insert
screws.
and 1x1.0mm clip 81446
Caster Clip,
81442 2.0mm
Front Arm
Insert, Upper
81442
Front
Arm, Upper 81060 Note that each arm is
89214 x4 81446 Hinge Pin,

!
marked with a R for the
4x12mm Caster Clip, Front Upper Right arm or an L for
FHCS 1.0mm Short the Left arm.

:: Steering Blocks Build - Bag 6.1, 6.2 - Step 1

89096
Build left and right side!
Wheel
Hex Pin
91566 (not included)
81328
15x21x4mm 25225
CVA
Bearing 3x3mm

ck
Coupler

ad 96
lo
Set Screw

th #15
re
#6
bla 5
ck 88
gre
ase

81326 81079
81394 Wheel Hex,
CVA Axle,
CVA Drive +1mm Wide
Steel
Shaft (94mm) 91565 89221
81328 81065 8x16x5mm 5x4mm
CVA Coupler Steering Bearing, Set Screw
Pin Block Flanged

:: Steering Blocks Build - Bag 6.1, 6.2 - Step 2

Build left and
right side! 25202 x2
81067 x2
Pillow 3x10mm
Ball, Steel FHCS
81063
Steering
Block Arm
+2 deg

!
Tighten pillow ball nut until
81070 x2
pillow ball begins to bind, Pillow
then loosen until pillow ball
81065 x2 Ball Nut,
moves freely. Pillow Aluminum
Ball Cap
 15
:: Steering Blocks Build - Bag 6.1, 6.2 - Step 3

81056 x2
Suspension
Arm
Endcap

81072
Pillow
Ball Shim
(0.7mm)

Pillow Ball Shims

81072 25211 x2
Pillow 3x10mm
Ball Shim BHCS
0.35mm 0.7mm 1.4mm (0.35mm)

:: Steering Blocks Build - Bag 6.1, 6.2 - Step 4

25211 x2
81262 x2
4x10mm
3x10mm
BHCS !
For attaching
FHCS #1596
thread steering link to 81447
lock
steering rack Front
89216 (not included) Bumper
Kit Setup:
M4
Locknut 1
2
3

81264 x2
4x20mm

89214
4x12mm
!
Install center
FHCS
89214 x2
universal underneath 4x12mm
FHCS
steering rack FHCS

:: Steering Blocks Build - Bag 6.1, 6.2 - Step 5

Kit Setup:
Mount the front shock in the
outside hole on the front arm.

A B

25612
M3 Locknut
W/ Flange

81197
Shock
81257
Pin
3x6mm
Set Screw
16
:: Rear End Build - Bag 7.1, 7.2, 7.3 - Step 1
81015 91561 x2
(not included)
Gearbox, 6x12x4mm
(Inboard) Bearing

ck
ad 96
lo
re 5
89221

th #1
Racer’s Tip: 5x4mm
Use black grease Set Screw
(#6588) to
lube the diff pinion
before installation!
81009 81021
Diff Pinion Center
Gear, 12T Universal,
(106mm)
81015
Dust Cap 4675
2.5x6mm
FHCS

:: Rear End Build - Bag 7.1, 7.2, 7.3 - Step 2

NOTE:
Install the REAR Diff!

Step 1:

!
Add shims on the ring gear
81381 x3 side to TIGHTEN gear mesh.
Diff Shim 88
Subtract shims on this side
#65 ease to LOOSEN gear mesh.
13.5x15.8x0.20mm STEP 1 ck g
r
bla
81015 Step 2:
Gearbox, Add or subtract shims here
(Outboard) to finalize diff side to side
25620 x2 play once gear mesh is
3x10mm set from Step 1.
Recommended diff side to
SHCS

!
side clearance (gearbox
assembly) 0.10 - 0.25mm.
81015
Anti-Roll 81259 STEP 2 Notes:
Bar Cap 2.5x18mm 0.1mm shim can be used for
BHCS fine tuning of gear mesh

:: Rear End Build - Bag 7.1, 7.2, 7.3 - Step 3

Kit Setup: 81434

81454 ! Rear Arm

!
Arm Mount, Use 2x 3x8mm BHCS Take care not to
HRC, Narrow only on the inside of the overtighten
(C) rear suspension arm. insert screws.

Do not overtighten!
89317 81434
Droop Rear Arm
Screw Insert
Droop Screw:
Kit Setup:
1.5mm 31532 x2
3x8mm !
81050 x2 BHCS Note that each
81260 x2 Arm Mount arm is marked
25201 x3 with a R for the
4x14mm Insert, 3x8mm Right Arm or an L
BHCS Center FHCS for the Left Arm.
 17
:: Rear End Build - Bag 7.1, 7.2, 7.3 - Step 4
81446 81260 x2 81150
Kit Setup:
Suspension 4x14mm Anti-Roll
81150 x2
Arm Shim BHCS Bar Pivot
Anti-Roll
81060 x2 Bar Rod
Hinge End
Pin
81455 81258
Arm Mount, 3x12mm
HRC, Narrow Set Screw
(D)
81050 x2
81150
Arm Mount 0mm
Rod End
Insert,
Ball
Center

:: Rear End Build - Bag 7.1, 7.2, 7.3 - Step 5

Center the anti-roll
bar collet on the anti-

81257 x2
! roll bar, then tighten
the 3x3mm set
screw.
81140
(Rear) Anti-Roll
3x6mm Bar, 2.7mm

! Set Screw

(not included)
81150
th #15
re
ad 96 Anti-Roll
lo
ck Bar
Left Side Right Side Collet
Anti-Roll Bar Pivots:
Offset the anti-roll bar
rod ends 81197 x2 25225
(approximately 45 degrees). Shock 3x3mm
Pin Set Screw

:: Rear End Build - Bag 7.1, 7.2, 7.3 - Step 6

25225 x2 #1596 (not included)
3x3mm thread lock

Set Screw
ck
ad 6
re 59
lo
th #1

31521 x2
2.5x8mm
BHCS

!
Rear Anti-Roll
Bar Gap: 0mm 81257 x2
3x6mm
Set Screw

! Tighten 3x6mm set screws just enough to

still allow the anti-roll bar to move freely.
18
:: Rear End Build - Bag 7.1, 7.2, 7.3 - Step 7

25188 81032
3x20mm Chassis
BHCS Brace
Mount 89214 x2
4x12mm
FHCS

81032 25612
Chassis M3
Brace, Locknut
Rear W/Flange

:: Rear End Build - Bag 7.1, 7.2, 7.3 - Step 8

Kit Setup: 81196 x2 25203 x2
5 Shock 25203 3x12mm
4
23 Bushing 3x12mm FHCS
1 FHCS 81106 x2
Wing
Mount
Button
81456
Shock 81108
#1
Tower, Wing Mount,
59
3 6 thr
ead 6 Rear Low 81106
loc
2 5 k
(Kit Setup) Wing,
1 4 (not included) Black
81109
81447 89225 x2 Wing 25215 x2
Body Post, 3x24mm Mount, M3
Rear SHCS +8mm Locknut

:: Rear End Build - Bag 7.1, 7.2, 7.3 - Step 9

25187 x2
3x14mm
BHCS

81263 x2
4x16mm
FHCS
25215 x2 89214 x2
M3 4x12mm
Locknut FHCS
 19
:: Rear Hubs Build - Bag 8.1, 8.2 - Step 1
Build left and 91566 89096
right side! 15x21x4mm Wheel
Bearing Hex Pin
81394
CVA Drive (not included)
Shaft
(94mm)

ock
81075

6
thr 159
dl
81328 Rear

ea
#
#6
bla 5
ck 88 CVA Hub
gre
ase
Coupler
25225
3x3mm
Set Screw 81079
81328 Wheel Hex,
CVA 91565 +1mm Wide
81326 8x16x5mm 89221
Coupler
CVA Axle, Bearing, 5x4mm
Pin
Steel Flanged Set Screw

:: Rear Hubs Build - Bag 8.1, 8.2 - Step 2

Install left and right side! Kit Setup:
(not included)

!
Note left/right
25211
3x10mm
BHCS

ock
6
thr 159
hub orientation.

dl
ea
#
81075
Rear Hub
Shim, 2.5mm
81076
Hub Hinge
Pin 89204
25612 81075 81075 25612 3x24mm
M3 Locknut Rear Hub Rear Hub M3 Locknut BHCS
w/Flange Shim, 1.0mm Shim, 1.5mm w/Flange

:: Rear Hubs Build - Bag 8.1, 8.2 - Step 3

Install left
89216 and right side!
M4 Kit Setup:
Locknut Mount the rear shock in the
outside hole on the rear arm.

AB

25612
81264 x2
M3 Locknut
4x20mm
W/ Flange
FHCS
81197
89214 x3 81257
Shock
4x12mm 3x6mm
Pin
FHCS Set Screw
20
:: Center
Center Bulkhead - Bag 9.1, 9.2 - Step 1
25211 x4
81304 81299
3x10mm
RC8B3e Center RC8B3e
BHCS
Bulkhead Motor Mount

81304
RC8B3e
Bulkhead
Cover

81304 6
59 ck
#1 d lo
RC8B3e thr
e a

Wire Guide 81262 x4 (not included)

31448 4x10mm
2.5x8mm FHCS
FHCS

:: Center
Center Bulkhead - Bag 9.1, 9.2 - Step 2
Motor
not
included!
(not included)
89206 x2
4x10mm 6
59 ock
#1 d l
BHCS re
a
th #1596
thread lock

31532 x2
3x8mm
BHCS

81300
RC8B3e Motor 7732
Motor
Mount Slide 4x4mm
pinion not
Set Screw included!

:: Battery Tray Build - Bag 10.1, 10.2 - Step 1

81298 ESC not
RC8B3e 89506 x2
included!
Battery Foam Hook and Loop
Battery Strap

6727
Servo
Tape

81297
RC8B3e
Battery Tray
 21
:: Battery Tray Build - Bag 10.1, 10.2 - Step 2
Install the ESC wire as shown first.

!
Then run the hook and loop straps
as shown.

:: Battery Tray Build - Bag 10.1, 10.2 - Step 3

81262 x3
4x10mm
81263 x2 FHCS
4x16mm
FHCS
22
:: Receiver Box Build - Bag 11.1, 11.2 - Step 1
89218 x4 Transponder
25187 x4 3x8mm not included!

!
3x14mm Receiver
Washer 25225 not included!
BHCS
3x3mm
When spacing your Set Screw
71023 servos, make sure the
Servo not servo does not touch
Grommet
included! the chassis when
Plug installed. 6727
6338 Servo
Antenna Tape
89023 x2
Tube and
Servo
Cap
Spacer
71023
Receiver
Box 81303
Grommet Receiver
Box

:: Receiver Box Build - Bag 11.1, 11.2 - Step 2

31448 x3
2.5x8mm
FHCS

81303
RC8B3e
Receiver
Box Lid

81262 x2
4x10mm
FHCS

:: Receiver Box Build - Bag 11.1, 11.2 - Step 3

81250 25215 25201
Servo Horn M3 3x8mm 91050
(Steering) Locknut FHCS HD Ball
and Cone Stud, 12mm
Printed here
A - Airtronics Washer
F - Futaba
31386
H - Hitec
Shim,
J - JR/KO
31386 2mm
81250 Shim,
Servo Horn 2mm
Insert

81250 91048
Servo Horn HD Ball
Large Ring Stud, 8mm
 23
:: Wheels / Tires / Body - Misc. - Step 1

!
Wheels, Tires, and Foam
Inserts Not Included!

!
(not included)
97
#15
lue
89296 CA t
ire g

RC8 Wheels, Build four

white, 83mm wheels/
89297 tires
RC8 Wheels, Tires:
yellow, 83mm When gluing tires to wheels, use a fast-curing
tire glue (CA) (AE #1597). This is available at
your local hobby shop. Make sure to clean the
mounting surface of the tire and wheel with
alchohol for best adhesion.

:: Wheels / Tires / Body - Misc. - Step 2

!
Install wheel nuts with the
serrated edge
towards the wheel.

81082 x4
Wheel Nuts,
17mm
(Blue)

:: Wheels / Tires / Body - Misc. - Step 3

Painting Tips:
Your kit comes with a clear polycarbonate
body. You will need to prep the body before
you can paint it. Wash the inside thoroughly
with warm water and liquid detergent. Dry
the body using a clean, soft, lint-free cloth.
Install the window masks on the inside of the
body. (R/C cars get painted from the inside).
Using high quality masking tape, apply tape
to the inside of the body to create a design.
Spray (either rattle can or airbrush R/C
specific paint) the paint to the inside of the
body (prefferably dark colors first, lighter
colors last).

NOTE: use ONLY paint that is recommended

for use with (polycarbonate) plastics. If you
do not, you can destroy the polycarbonate
body!!!

After painting, cut the body along the trim

lines. Make sure to drill or use a body reamer
to make the holes for the body mounts and
antenna if required!
24
:: Droop Settings
Set droop by measuring overall length of shock (from standoff to shock pin) while the chassis is elevated above your
working surface. The shocks should be fully extended.
Kit setup for front droop is 105mm shock length, and 124mm shock length for the rear.
If the shock length is too long, adjust by turning the droop screws clockwise.
If the shock length is too short, adjust by turning the droop screws counter-clockwise.

Front Droop: Increasing front droop (loosen droop screws) will increase off-throttle steering. It also allows the
front end to lift more, giving more rear grip and less front grip on-power. Remember to never loosen the screws beyond
the FULL DROOP setting. Decreasing front droop (tighten droop screws) yields more on-power steering and quicker
response at the expense of some stability in bumpy sections. It will also give less off-throttle steering.

Rear Droop: Increasing rear droop (loosen droop screws) will increase traction in bumpy sections, but will reduce
high-speed stability. Remember to never loosen the screws beyond the FULL DROOP setting. Decreasing rear droop
(tighten droop screws) will increase stability in high speed sections, but will reduce stability in bumpy sections.

Setup Sheets:
To find different setups for your kit, visit our website, www.rc10.com and click on the
“Setup Sheets” link, and then the link to your model. Our team of professional drivers help develop these setups at
races worldwide. Additionally, most drivers have a “base” setup that they use as a starting point for most races.
Try running some of our base setups or look for track conditions and tires that are similar to your local track and
replicate that setup. Remember, each adjustment has a purpose, so copy everything from the setup sheet and then
make adjustments based on the recommendations in here.
 25
:: Shocks :: Shock Fluid
81160 RC8B3 Shock Body, 30.5mm 2 5420 10 Weight Silicone Shock Fluid 2oz.
81161 RC8B3 Shock Body, 39.5mm 2 5421 20 Weight Silicone Shock Fluid 2oz.
81170 RC8B3 TiN Shock Shaft, 3x30.5mm 2 5422 30 Weight Silicone Shock Fluid 2oz.
81173 RC8B3 TiN Shock Shaft, 3.5x42.5mm 2 5423 40 Weight Silicone Shock Fluid 2oz.
81181 RC8B3 Shock Cap Insert 2 5424 22.5 Weight Silicone Shock Fluid 2oz.
81185 RC8B3 Shock Rebuild Kit 2 5425 80 Weight Silicone Shock Fluid 2oz.
81186 RC8B3 Shock O-Ring 8 5426 27.5 Weight Silicone Shock Fluid 2oz.
81188 RC8B3 Shock Body Seal Retainer 2 5427 15 Weight Silicone Shock Fluid 2oz.
81190 RC8B3 Shock Boots 4 5428 25 Weight Silicone Shock Fluid 2oz.
81194 RC8B3 Shock Rod End & Spring Cup 4 5429 35 Weight Silicone Shock Fluid 2oz.
81200 RC8B3 Shock Pistons 2 ea. 5430 45 Weight Silicone Shock Fluid 2oz.
(6x1.3 - KIT, 6x1.3 T, 8x1.2 T) 5431 55 Weight Silicone Shock Fluid 2oz.
81221 Spring Collars, 20mm 2 5432 32.5 Weight Silicone Shock Fluid 2oz.
81452 RC8B3.2 Shock Cap 2 5433 37.5 Weight Silicone Shock Fluid 2oz.
81453 RC8B3 Shock Bladder, Stiff 2 5434 42.5 Weight Silicone Shock Fluid 2oz.
81461 RC8B3.2 Shock Kit, Front 1 5435 50 Weight Silicone Shock Fluid 2oz.
81462 RC8B3.2 Shock Kit, Rear 1 5436 60 Weight Silicone Shock Fluid 2oz.
89215 M2.5mm Shock Piston Locknut 10 5437 70 Weight Silicone Shock Fluid 2oz.
89278 Washer, 2.6x6mm 20 5438 47.5 Weight Silicone Shock Fluid 2oz.
91492 12mm V2 Bleeder Screw / Gasket 2

81181
89215
89278 91492
81221
81200 91492
81452
89278
81453 81221

Front:
81170
Front:
Rear: 81160
81173 Kit Front:
Rear: 81225
81161
Kit Rear:
81231

81185
81190
81185
81185
81185
81194
81185
81194

81188
81194
:: Springs
81222 Front Spring, V2, 4.9lb/in, Green Pr.
81223 Front Spring, V2, 5.1lb/in, White Pr.
81224 Front Spring, V2, 5.3lb/in, Gray Pr.
81225 Front Spring, V2, 5.5lb/in, Blue - KIT Pr.
81226 Front Spring, V2, 5.7lb/in, Yellow Pr.
81229 Rear Spring, V2, 4.1lb/in, White Pr.
81230 Rear Spring, V2, 4.2lb/in, Gray Pr.
81231 Rear Spring, V2, 4.3lb/in, Blue - KIT Pr.
81232 Rear Spring, V2, 4.4lb/in, Yellow Pr.
26
:: Front / Rear Gear Differential :: Center Gear Differential
81008 Diff Outdrives, 15mm (Rear Diff) 2 81012 Diff Outdrives, 17mm (Center Diff) 2
81009 RC8B3.1 Underdrive Diff Gear Set, 42T 1 81379 RC8B3.1 Differential Case 1
81012 Diff Outdrives, 17mm (Front Diff) 2 81380 RC8B3.1 Differential Gear Set (HTC) 1
81379 RC8B3.1 Differential Case 1 81381 RC8B3.1 Differential Shim Set 1
81380 RC8B3.1 Differential Gear Set (HTC) - Kit 1 81383 RC8B3.1 Differential Gear Set (LTC) 1
81381 RC8B3.1 Differential Shim Set 1 81384 RC8B3.1 Differential Gasket 3
81383 RC8B3.1 Differential Gear Set (LTC) 1 81385 RC8B3.1 Differential O-Ring Set 1
81384 RC8B3.1 Differential Gasket 3 81389 RC8B3.1e Plastic Spur Gear, 46T - KIT 1
81385 RC8B3.1 Differential O-Ring Set 1 89208 M3 x 14mm FHCS 10
89208 M3 x 14mm FHCS 10 91564 8 x 16 x 5mm Bearings 2
91564 8 x 16 x 5mm Bearings 2
81008 - Rear
81012 - Front 81012
81380
81381
81380 81381
91564 81380
81385 91564
81381 81381 81380
81379 81381
81385
89208 89208
81379
91564
81381 81009
81380 91564 81389
81381 81380 81381
81381
81384
81384
81008 - Rear 81012
81385
81012 - Front 81385
81380
81380
81380 81380

:: Center Bulkhead
7732 M4 x 4mm Set Screw 10
25211 M3 x 10mm BHCS 10
31448 M2.5 x 8mm FHCS 6 25211
31532 M3 x 8mm BHCS 6
81262 M4 x 10mm FHCS 6 25211
81299 RC8B3e Motor Mount 1
25211
81300 RC8B3e Motor Mount Slide 1 25211
81304 RC8B3e Center Bulkhead / Cover / Guide 1
89206 M4 x 10mm BHCS 10
89512 Pinion, 12T 1
89513 Pinion, 13T 1 81300 81304
89514 Pinion, 14T 1
89515 Pinion, 15T 1
89516 Pinion, 16T 1 89206
89517 Pinion, 17T 1
89593 Pinion, 18T 1 89206
89594 Pinion, 19T 1 31532
89595 Pinion, 20T 1

31532
81299
7732 81304

89514

81262 81262

81304
31448
 27
:: Front Gearbox
4675 M2.5 x 6mm FHCS 10
25620 M3 x 10mm SHCS 10 89221
31521 M2.5 x 8mm BHCS 10
81009 RC8B3.1 Diff Pinion Gear, 12T 1
81015 RC8B3 Gearbox 2 81015
81020 RC8B3 Center Universal, 76mm 1
81020
81050 RC8B3 Arm Mount Insert 12 ea.
81060 RC8B3 Hinge Pin Set 1
81009 91561
81257 M3 x 6mm Set Screw 10
81259 M2.5 x 18mm BHCS 10 25620
81260 M4 x 14mm BHCS 10
31521
81264 M4 x 20mm FHCS 10 91561
81291 RC8B3 HRC Arm Mount, A 1
81292 RC8B3 HRC Arm Mount, B 1 81015
81446 RC8B3 Shim Set 1 81015
81447 RC8B3 Body Post & Bumper 1
89214 M4 x 12mm FHCS 10 4675 81050
89221 M5 x 4mm Set Screw 10
91561 Bearing, 6 x 12 x 4mm 4 81446
81259 81447
89214
81257 81260
31521

81264
81050 81060 81292
81291 81446
81050
81060
81260 81050

:: Rear Gearbox
4675 M2.5 x 6mm FHCS 10
25620 M3 x 10mm SHCS 10 31521
81259 81257
31521 M2.5 x 8mm BHCS 10
81009 RC8B3.1 Diff Pinion Gear, 12T 1
81015 RC8B3 Gearbox 2
81021 Center Universal, 106mm 1 91561 81015
81050 RC8B3 Arm Mount Insert 12 ea.
81060 RC8B3 Hinge Pin Set 1 81009 25620
81257 M3 x 6mm Set Screw 10
81259 M2.5 x 18mm BHCS 10
81015
81260 M4 x 14mm BHCS 10 81015
81264 M4 x 20mm FHCS 10
81446 RC8B3 Shim Set 1
81454 RC8B3 HRC Arm Mount, Narrow, C 1 91561
81455 RC8B3 HRC Arm Mount, Narrow, D 1
89214 M4 x 12mm FHCS 10
89221
89221 M5 x 4mm Set Screw 10
91561 Bearing, 6 x 12 x 4mm 4 81015
4675 81050
81260
81021 81264

89214 81455
81446
81050 81060
81454 81446
81050
81060
81050
81260
28
:: Steering
8680 FT Steering Bearing Set, 4 ea.
5 x 8 x 2.5mm & 6 x 10 x 3mm
25201 M3 x 8mm FHCS 10
31404 Bearing, 6 x 10 x 3mm 4
81083 Servo Saver Spring 1
81084 RC8B3.1 Servo Saver Tube 1
81086 RC8B3 Steering Bellcrank 1
81088 RC8B3 Steering Bellcrank Nut 2
31404 81083
81089 RC8B3 Steering Rack 1 31404
81091 RC8B3 Steering Post 2
81262 M4 x 10mm FHCS 10
81397 Turnbuckle Ball, 4mm 4 81084 81088
81084
8680
81084

81084 81086
81088

8680 8680
81084
81086 31404

8680
81089 81086
81091 81091

25201

81262 81262
25201
31404

:: Front Shock Tower :: Rear Shock Tower

25612 M3 Locknut with Flange, Black 20 2208 Large Hood Pins 6
81026 RC8B3 Shock Tower, Front 1 25203 M3 x 12mm FHCS 20
81050 RC8B3 Arm Mount Inserts 12 ea. 25211 M3 x 10mm BHCS 20
81196 RC8B3 Shock Bushing 4 25612 M3 Locknut with Flange, Black 20
89214 M4 x 12mm FHCS 10 81196 RC8B3 Shock Bushing 4
89225 M3 x 24mm SHCS 10 81447 RC8B3 Body Posts & Bumper 1
81456 RC8B3.2 Rear Shock Tower, Aluminum 1
89214 M4 x 12mm FHCS 10
89225 M3 x 24mm SHCS 10

81196
89225 25612 25211
25203
81026
25211

81196
89225

2208 89214
81050
25612 81447 81456

89214
 29
:: Front Suspension
25201 M3 x 8mm FHCS 10
25202 M3 x 10mm FHCS 10 25201
25211 M3 x 10mm BHCS 10
25225 M3 x 3mm Set Screw 10
31532 M3 x 8mm BHCS 10 81442 81060
81056 RC8B3 Suspension Arm Endcap 4
81060 RC8B3 Hinge Pin Set 1
81446 25211
81063 RC8B3 Steering Block Arm +2 deg Pr. 81446 25202
81065 RC8B3 Steering Block Pr.
81067 RC8B3 Pillow Ball 2 81056 81397 25211
81070 RC8B3 Pillow Ball Nut 4 81093
81072 RC8B3 Pillow Ball Shim 6 81442 81072
81079 RC8B3 Wheel Hexes, +1mm wide 2 89526 81063
81082 RC8B3 Wheel Nuts, 17mm Blue 2 81328
81093 RC8B3 Rod End, 4mm (4 ball joints, 1 81394 81067 81397
2 rod ends, 2 offset rod ends) 91566
81197 RC8B3 Shock Pin 4 81065
81257 M3 x 6mm Set Screw 10 81093
81326
81328 81065
RC8B3 CVA Axle, steel 2
81328 FT RC8B3 CVA Rebuild Kit 1 81257 81326 81070
81394 RC8B3.1 CVA Driveshaft (94mm) 2
81397 RC8B3.1 Turnbuckle Balls 4
25225
91565
81438 RC8B3.2 Front Lower Susp. Arms 1 81197
81442
89096
RC8B3.2 Front Upper Arm Set Pr. 81438
81446 RC8B3 Shim Set 1 81065
89096 Wheel Hex Pin 4 81197
89221 M5 x 4mm Set Screw 10
81070
89317 Droop Screw 8
89317
89526 4 x 50mm Turnbuckle 2
81082
91565
81056 81079
8 x 16 x 5mm Flanged Bearing 4 81438
91566 15 x 21 x4mm Bearing 4 81067
31532 89221
81072
25201

:: Rear Suspension
25201 M3 x 8mm FHCS 10
81397 25211
25211 M3 x 10mm BHCS 10
25225 M3 x 3mm Set Screw 10 81094
25612 M3 Flanged Locknut 10 89269
31532 M3 x 8mm BHCS 10
81075 RC8B3 Rear Hub Pr. 81328
81076 RC8B3 Hub Hinge Pin 2 81094
81079 RC8B3 Wheel Hexes, +1mm wide 2 81394 81398
81082 RC8B3 Wheel Nuts, 17mm Blue 2
81094 RC8B3 Rod End, 5mm (4 ball joints, 1 81326 89204 91565
2 rod ends, 2 offset rod ends)
81328 81079
81197 RC8B3 Shock Pin 4 81075
81257 M3 x 6mm Set Screw 6 91566
81326 RC8B3 CVA Axle, steel 2 25612 89096
81328 FT RC8B3 CVA Rebuild Kit 1
25225 89221
81394 RC8B3.1 CVA Driveshaft (94mm) 2
81397 RC8B3.1 Turnbuckle Ball 4 81446
81398 RC8B3.1 Turnbuckle Ball (Shouldered) 4 81257 81075
81434 RC8B3.2 Rear Arm Set 1 81257
81446 RC8B3 Shim Set 1 81082
81197
89096 Wheel Hex Pin 4
89204 M3 x 24mm BHCS 10 81434
89221 M5 x 4mm Set Screw 10
89269 Steel Turnbuckle, 5 x 38mm 2
81076
89317 Droop Screw 8 81197
91565 8 x 16 x 5mm Flanged Bearing 4
91566 15 x 21 x4mm Bearing 2
25612
81434
31532

25201
89317
30
:: Front Chassis Brace :: Rear Chassis Brace
2208 Large Hood Pins 6 25188 M3 x 20mm BHCS 10
25201 M3 x 8mm FHCS 10 25215 M3 Locknut, Black 10
81030 RC8B3 Top Plate 1 81032 RC8B3 Chassis Brace Pr.
81032 RC8B3 Chassis Brace Pr. 89214 M4 x 12mm FHCS 10
81049 RC8B3 Upper Link Mount 1 89216 M4 Locknut 10
81050 RC8B3 Arm Mount Insert 12 ea.
81262 M4 x 10mm FHCS 10
81447 RC8B3.2 Body Post and Bumpers 1
89214 M4 x 12mm FHCS 10
89216 M4 Locknut 10

2208
89214
81447 89214
81262 25188
25201
81032
25215
89214
81032
81030

25201 81032

81049
89216 89216
89214
89214
81050 89216

:: Anti-Roll Bars :: Wing

25225 M3 x 3mm Set Screw 10 25187 M3 x 14mm BHCS 10
81129 RC8B3 Front Anti-Roll Bars (2.0, 2.1, 2.2mm) 1 ea. 25203 M3 x 12mm FHCS 10
81130 RC8B3 Front Anti-Roll Bars (2.3, 2.4, 2.5mm) 1 ea. 25215 M3 Locknut, Black 10
81131 RC8B3 Front Anti-Roll Bars (2.6, 2.7, 2.8mm) 1 ea. 81104 RC8B3 IFMAR Wing, Black 1
81139 RC8B3 Rear Anti-Roll Bars (2.2, 2.3, 2.4mm) 1 ea. 81105 RC8B3 IFMAR Wing, White 1
81140 RC8B3 Rear Anti-Roll Bars (2.5, 2.6, 2.7mm) 1 ea. 81106 RC8B3 Wing, Black 1
81141 RC8B3 Rear Anti-Roll Bars (2.8, 2.9, 3.0mm) 1 ea. 81108 RC8B3 Wing Mount 1
81150 RC8B3 Anti-Roll Bar Drop Link / Collet 1 81109 Wing Mount, +8mm 1
81258 M3 x 12mm Set Screw 6 81263 M4 x 16mm FHCS 6

81106
25203

81150 81106

81129 81258
81104
81130
81105
81131
81150 81106
81139
81140
81141 81150
25215
25225
81263
81150
25225
81150 81108
81109
25215
25187
 31
:: Radio Tray / Battery Tray / Servo Linkage
1401 Turnbuckle, 3 x 33mm 2
6338 Antenna Tube with Cap, Black 1 25225
25187 M3 x 14mm BHCS 10
25188 M3 x 20mm BHCS 10 6338
25201 M3 x 8mm FHCS 10 31448
25215 M3 Locknut, Black 10
25225 M3 x 3mm Set Screw 10 31448 6338
31448 M2.5 x 8mm FHCS 10
71023 Receiver Box Grommets 1 31448 81298
81250 RC8B3 Servo Horns 1
81262 M4 x 10mm FHCS 10
81263 M4 x 16mm FHCS 10 81303
81297 RC8B3e Battery Tray 1 89506
81298 RC8B3e Battery Foams 1
81303 RC8B3e Servo / Receiver Box 6 25187
89023 Servo Mount Spacers 1
89218 3 x 8mm Washer 1 89218
89506 Hook and Loop Fastener Battery Strap 3 25187
91048 HD Ballstuds, 8mm 10 89218 89023
91050 HD Ballstuds, 12mm 10
91469 Ball Cup Set, Small 1 89023 71023

91469 81297
25215 25201 81303
81250
1401
81250
91469 31386
81250 81262
91050 91048
31386 81250 81262 81263 81262

:: Chassis
25201 M3 x 8mm FHCS 10
31540 M3 x 5mm FHCS 10
81431 RC8B3.2 Side Guards Pr.
81460 RC8B3.2e Chassis 1 31540

81431 81460

25201

31540

25201

81431
32
:: Factory Team and Option Parts :: Reedy Comp. Motors & Spare Parts
25392 3mm Blue Locknut, Flanged 10 27405 Sonic 866 Competition 1/8 Buggy Motor 1900kV 1
31550 M3 Aluminum Lock Nut 6 27406 Sonic 866 Competition 1/8 Buggy Motor 2100kV 1
81028 RC8B3 FT Graphite Front Shock Tower 1 27407 Sonic 877 Competition 1/8 Truggy Motor 2000kV 1
81077 FT Aluminum Rear Hubs 1 27408 Sonic 866 Rotor - Standard 1
81080 RC8B3 Wheel Hexes, +2mm Wide 2 27409 Sonic 866 Rotor - Low-Torque 1
81081 FT Hex Drives, 17mm, Blue 2 27410 Sonic 877 Rotor- Standard 1
81085 Servo Saver Arm, Aluminum 1 27411 Sonic 866/877 Screw Set (11 pcs.) 1
81382 FT Differential Cross Pins, With Inserts 1 27412 Sonic 866/877 Bearing Set (pr.) 1
81405 RC8B3.1 FT Chassis Weight, 15g 1 27413 Sonic 866/877 Sensor Board w/bearing 1
81406 RC8B3.1 FT Chassis Weight, 30g 1
81407 RC8B3.1 Shock Seal Bushing Set 1
81408 FT Aluminum Turnbuckle Ball Set 1
81410 RC8B3.1 Shock Bushings, Blue 4 :: Reedy Comp. Motors Accessories
81422 RC8B3.1 FT Graphite Rear Shock Tower, Tall 1 978 Flat Sensor Wire 70mm 1
979 Flat Sensor Wire 110mm 1
980 Flat Sensor Wire 150mm 1
981 Flat Sensor Wire 200mm 1
982 Flat Sensor Wire 270mm 1
994 Flat Sensor Wire 125mm 1
995 Flat Sensor Wire 175mm 1
27423 30mm Lightweight Motor Fan w/195mm extension 1
27457 30mm Aluminum Motor Fan w/195mm extension 1
27458 40mm Aluminum Motor Fan w/195mm extension 1

:: Wheels / Tires / Bodies / Decals :: Reedy ESC’S

726 Reedy 2016 Sticker Set 1 27007 Blackbox 850R Competition 1/8 ESC 1
81110 RC8B3 Pro Line Body 1 27008 Blackbox 850R Competition 1/8 ESC w/Programmer 1
81270 RC8B3 Decal Sheet 1 27027 Blackbox PROgrammer2 1
89296 RC8 83mm Wheels (White) 4 27030 Blackbox ESC/Programmer2 Connection Wire 1
89297 RC8 83mm Wheels (Yellow) 4 27032 Blackbox 850R 30x30x10mm Fan w/screws 1

:: MyLaps Transponders :: Reedy Servos & Accessories

MLP10R120 MyLaps RC4 (3-wire) Transponder 1 27100 RS1206 Digital HV Hi-Speed Competition Servo 1
MLP10R147 MyLaps RC4 (3-wire) Pro Transponder, Black 1 27101 RT1508 Digital HV Hi-Torque Competition Servo 1
MLP40R222 MyLaps Transponder Holder 1 27102 RS1206 Servo Case Set w/screws 1
27103 RS1206 Servo Gear Set 1
27105 RT1508 Servo Gear Set 1
27114 RT2406 Digital HV Brushless Competition Servo 1
:: Reedy Chargers and Accessories 27122 Reedy Aluminum Servo Horn (25) 1
27123 Reedy Aluminum Clamping Servo Horn (25) 1
27200 1216-C2 Dual AC/DC Comp. Battery Charger 1
27135 RT2406 Gear Set 1
27201 324-S AC LiPo/LiFe Compact Balance Charger 1
27136 RT2706A Gear Set 1
27202 123-S AC LiPo Compact Balance Charger 1
27139 RT2406 Case Set 1
27220 7-in-1 Universal Charge Lead (4mm) 1
27221 T-plug Charge Lead (4mm) 1
27222 XH 2-6S Balance Board (4mm) 1
27223 RX Charger Lead FUT (4mm) 1
27224 US to IEC 320 C5 angle 1M AC Power Cord 1
27226 EU to IEC 320 C5 angle 1M AC Power Cord 1
27232 4mm/5mm Pro Charge Lead 1 :: Reedy Accessories
643 Low Profile Bullet Plug 4mm x 14mm (2) 1
644 Low Profile Bullet Plug 4mm x 14mm (10) 1
645 Low Profile Bullet Plug 5mm x 14mm (2) 1
646 Low Profile Bullet Plug 5mm x 14mm (10) 1
647 Silicone Wire 12AWG-Black (1m) 1
648 Silicone Wire 14AWG-Black (1m) 1
650 Shrink Tubing - 15pcs 4.5mm x 20mm 1
747 Silicone Wire 12AWG-Black (30m) 1
:: Reedy Batteries 790 Silicone Wire 13AWG-Black (1m) 1
302 AA Alkaline 1.5V (4) 1 791 Silicone Wire 13AWG-Black (30m) 1
756 Wolfpack LiPo 4000mAh 35C 14.8V w/T-Plug 1 792 Low Profile Caged Bullet Plug 4mm x 14mm (2) 1
27313 LiPo Pro TX/RX 2400mAh 7.4V Flat 1 794 Low Profile Caged Bullet Plug 5mm x 14mm (2) 1
27315 LiFe Pro TX/RX 1600mAh 6.6V Flat 1
27353 Zappers SG3 6400mAh 115C 15.2V Stick 1
27354 Zappers SG3 5200mAh 115C 15.2V LP Stick 1
 33
:: Apparel / Promotional :: Tools
TEE SHIRTS 1111 FT Turnbuckle Wrench - 1/10 Vehicles 1
SP124* AE 2017 Worlds Tee, Black (S, M, L, XL-5XL) 1 1112 FT 4mm Turnbuckle Wrench - 1/10 Vehicles 1
SP126* Team Assoc. Tri T-Shirt, Black (S, M, L, XL-5XL) 1 1113 12mm Big Bore Shock Tool 1
SP128* Team Assoc. Womens Tri T-Shirt, Black (S, M, L) 1 1114 FT Dual Turnbuckle Wrench 1
SP129* Team Assoc. Youth Tri T-Shirt, Black (S, M, L) 1 1449 Off Road Ride Height Gauge 1
SP130* Team Assoc. Youth WC19 T-Shirt, Black (S, M, L) 1 1452 FT TC Ride Height Gauge - Touring Car Vehicles 1
SP131* Team Assoc. Womens WC19 T-Shirt, Black (S, M, L) 1 1498 FT Universal Tire Balancer 1
SP132* Team Assoc. WC19 T-Shirt, Black (S, M, L, XL-5XL) 1 1499 FT Body Reamer 1
SP143* Reedy W19 T-SHirt, Black (S, M, L, XL-3XL) 1 1500 FT 1.5mm Hex Driver 1
SP161* FT T-Shirt, White (S, M, L, XL-3XL) 1 1501 FT 2.0mm Hex Driver 1
SP200* Element RC Logo Tee, Gray (S, M, L, XL-5XL) 1 1502 FT 2.0mm Ball Hex Driver 1
SP201* Element RC Rhombus Tee, Black (S, M, L, XL-5XL) 1 1503 FT 2.5mm Hex Driver 1
1504 FT 2.5mm Ball Hex Driver 1
1505 FT 3.0mm Hex Driver 1
HOODIES/JACKETS 1506 FT 5.0mm Hex Driver 1
SP125* AE 2017 Worlds Pullover, Black (S, M, L, XL-3XL) 1 1507 FT 5.5mm Nut Driver 1
SP127* Team Associated Tri Zip Up, Black (S, M, L, XL-3XL) 1 1508 FT 7.0mm Nut Driver 1
SP142* Reedy W19 Hoodie - Black (S, M, L, XL-3XL) 1 1510 FT 1.5mm Hex Replacement Tip 1
SP160* FT Logo Lightweight “Medal” Zip Up Streaked, 1 1511 FT 2.0mm Hex Replacement Tip 1
Black (S, M, L, XL-4XL) 1512 FT 2.0mm Ball Replacement Tip 1
SP230* Element RC Zip Up, Black (S, M, L, XL-5XL) 1 1513 FT 2.5mm Hex Replacement Tip 1
SP231* Element RC Hoodie, Black (S, M, L, XL-5XL) 1 1514 FT 2.5mm Ball Replacement Tip 1
SP250* Element RC Jacket, Black (S, M, L, XL-2XL) 1 1515 FT 3.0mm Hex Replacement Tip 1
1518 FT Hex Driver Tool Set (3pcs) 1
HATS 1519 FT Hex/Nut Driver Tool Set (5pc) 1
SP20 AE Patch Trucker Hat 1 1522 FT Digital Scale, 100/0.01g 1
SP260 Element RC Hat, Curved Bill, Black 1 1555 FT Clutch Gauge, 4 Shoe 1
SP261 Element RC Hat, Flat Bill, Black 1 1568 FT 5.5mm Short Nut Driver 1
SP262 Element RC Beanie, Black 1 1569 FT 7mm Nut Driver, T-Handle 1
SP430 Reedy Trucker Hat 2018 1 1570 FT 5.5mm Short Nut Driver 1
SP431 Team Associated Tri Trucker Hat, Flat Bill 1 1571 FT 1:8 Wheel Nut Wrench, 17mm Hex 1
SP432 Team Associated Tri Trucker Hat, Curved Bill 1 1579 FT Ball Cup Wrench 1
SP434 FT Logo Trucker Hat, Flat Bill 1 1595 Chassis Weights, 1/4 oz 1
SP435 FT Logo Trucker Hat, Curved Bill 1 1650 7 Piece Hex Driver Set 1
1657 FT 1/4” Hex Drive .050” Tip 1
BANNERS/MATS CARRIERS 1659 FT 1/4” Hex Drive 5/64” - 2.0mm Tip 1
SP115 Reedy Circuit Cloth Banner 1 1661 FT 1/4” Hex Drive 1.5mm Tip 1
SP280 Element RC Counter Top Mat 1 1662 FT 1/4” Hex Drive 2.5mm Tip 1
SP281 Element RC Pit Mat 1 1666 FT 1/4” Hex Drive 5.5mm Nut Driver Tip 1
SP282 Element RC Pit Towel 1 1667 FT 1/4” Hex Drive 7.0mm Nut Driver Tip 1
SP283 Element RC Vinyl Banner, 48x24 1 1668 FT 1/4” Hex Drive 8.0mm Nut Driver Tip 1
SP284 Element RC Vinyl Banner, 20x12 1 1674 FT 1/4” 5 Piece Power Tool Tips Set (5/64-2.0mm, 1
SP285 Element RC Pin Pattern Counter Top Mat 1 1.5mm, 2.5mm, 5/64”- 2.0mm ball, 2.5mm ball)
SP425 FT Fluid Carrier 1 1675 FT Shock Shaft Pliers 1
** Use part number plus the desired size when ordering! 1679 FT T-Handle Ratchet Driver 1
1719 FT Camber + Track Width Tool 1
1737 FT Body Scissors 1
3718 12 Inch Nylon Wire Ties 12
:: Lubes & Adhesives / Misc. 3987 FT Droop Gauge - Touring Car Vehicles 1
1105 FT Green Slime Shock Lube 1 89240 RC8 FT Turnbuckle Wrench 1
1596 FT Locking Adhesive 1
1597 FT Tire Adhesive 1
5451 Silicone Diff Fluid 2,000CST 1
5452 Silicone Diff Fluid 3,000CST 1
5444 Silicone Diff Fluid 4,000CST 1
5453 Silicone Diff Fluid 5,000CST 1
5446 Silicone Diff Fluid 6,000CST 1
5447 Silicone Diff Fluid 15,000CST 1 :: Contact Information
5454 Silicone Diff Fluid 7,000CST 1
5455 Silicone Diff Fluid 10,000CST 1 Check out the following web sites for all of our electric kits,
5456 Silicone Diff Fluid 20,000CST 1 current products, new releases, setup help, tips, and racing info!
5457 Silicone Diff Fluid 30,000CST 1
5458 Silicone Diff Fluid 60,000CST 1 Associated Electrics, Inc.
5448 Silicone Diff Fluid 80,000CST 1 21062 Bake Parkway
5459 Silicone Diff Fluid 100,000CST 1 Lake Forest, CA 92630-8853 USA
5461 Silicone Diff Fluid 200,000CST 1 http://www.TeamAssociated.com
5463 Silicone Diff Fluid 500,000CST 1 http://www.RC10.com
5465 Silicone Diff Fluid 1,000,000CST 1 http://twitter/Team_Associated
6588 Black Grease - 4cc 1 1596 http://www.instagram.com/teamassociatedrc/
6591 S.Diff Lube - 4cc 1 http://www.facebook.com/TeamAssociated/
6636 Silicone Grease - 4cc 1
6727 Servo Tape 2 call: (949) 544-7500
7710 FT Foam Prefilter Treatment, 1 oz. 1 fax: (949) 544-7501