Login or Sign Up
Search
Forums Blogs Articles Groups
Today's Posts Member List Calendar
Forum
Vehicle Discussion
E46 (2001 - 2006)
e46 Coding/Tuning
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to
register
before you can post: click the register link above to proceed. To start viewing messages,
select
the forum that you want to visit from the selection below.
How to BDM MSS54/HP with FGtech Galletto 4
POSTS LATEST ACTIVITY PHOTOS
Search Page 2 of 2 Filter
02-14-2021, 08:45 PM #16
Galetto clone can not correct checksums in this ecu. Flash unmodified
(no need for checksum correction) and modify later with an tool over
Obd with checksum correction.
S54B32
Senior Member
Join Date: Apr 2020
Posts: 167
Location: Germany
03 TiAG SMG, near to zero options, Electric steeringpump conversion,
MK60, karbonius, Flap, CSL management, Self tuned, AEM UEGO,
Limited Pole Positions, SPAL Electric Fan, visco&aux Fan delete,
shortest possible Z3 rack, style 163, 996 Brakes, PSS10s, Turner
Motorsport Camberplates, GC Camberarms, Mufflermod, every bushing
solid or Polyurethane, near every M3 Job is done
1 like
02-15-2021, 11:30 AM #17
Thanks for the help. It looks like everything has worked spot on
HARBER07
Junior Member
Join Date: Jan 2021
Posts: 8
02-18-2021, 10:47 AM #18
Originally posted by Martyn
Joshb556 Split the file in half in HexEdit or similar.
Junior Member
This is an interesting solution. Does it matter which half goes onto the
master/slave chip?
Join Date: Nov 2020
Posts: 17 I was hoping to flash this with an EEPROM reader. Could that work?
Also, if you are having trouble sourcing these AMD chips. I found that
MS42/MS43 DMEs use the same AMD chips (each DME has one, and
some have the SI0 chip but I think they can be used as well, the AMD
datasheet doesn't really specify any differences). These DMEs are
pretty plentiful in junkyards, and 2 DMEs can yield the needed chips. I
am going to be trying this and can provide feedback on my results.
Last edited by Joshb556; 02-18-2021, 10:52 AM.
02-18-2021, 01:04 PM #19
Originally posted by Joshb556
This is an interesting solution. Does it matter which half goes
heinzboehmer onto the master/slave chip?
Senior Member
First half onto master and the second half onto slave.
Join Date: Mar 2020
Posts: 2349 Originally posted by Joshb556
Location: Bay Area I was hoping to flash this with an EEPROM reader. Could that
work?
Sure, as long as you can get the binary onto the chips you're good.
2002 Topasblau M3 - Coupe - 6MT - Karbonius CSL Airbox - MSS54HP Conversion -
Kassel MAP - SSV1 - HJS - PCS Tune - Beisan - AutoSolutions - Vibra-Technics - CMP -
VinceBar - Koni - Eibach - BlueBus - Journal - Instagram
1 like
08-25-2021, 08:10 AM #20
Where are you guys getting the bdm headers from? I need to get a new
dme setup as my old one shorted
thegenius46m
Senior Member
Join Date: Mar 2020
Posts: 376
Location:
Pleasanton, CA
2003 E46 M3 TiAg/Cinnamon 6MT
2005 E46 330i ZHP Imola/Sand
| Karbonius | Schrick | Supertech | Volk | Recaro | FCM |
SuperSprint | Turner | Hyperco | GC | PFC | CSF | VAC | OMP |
Radium Engineering | MPRacing |
Instagram:@thegenius46m
NorCal DME Programming and Coding Expert
01-30-2022, 03:55 PM #21
Originally posted by heinzboehmer
No other version of the software that I found online worked
gixxer and I only got it working with the download that includes
Senior Member "FGTech Galletto Edited v1.exe".
I believe this was because the BDM FW was at 0386 (aka. tool-0386
Join Date: Mar 2020 showing on the BDM V54 2012 SW).
Posts: 152
Location: RTP NC If FW is at 0475 (aka. tool-0475) then the following install should work,
"V55 for 0475 all Win.exe"
And yes, Windows 7 x86 version, including running as VM, seem to be
lot simpler than x64 counterpart.
01-30-2022, 03:59 PM #22
Originally posted by thegenius46m
Where are you guys getting the bdm headers from? I need to
gixxer get a new dme setup as my old one shorted
Senior Member
Following? And bend to solder, i would think.
Join Date: Mar 2020 https://www.amazon.com/Proto-Advanta...s%2C289&sr=8-2
Posts: 152
Location: RTP NC
01-30-2022, 04:13 PM #23
Originally posted by gixxer
cossie1 I believe this was because the BDM FW was at 0386 (aka.
Junior Member tool-0386 showing on the BDM V54 2012 SW).
If FW is at 0475 (aka. tool-0475) then the following install
should work, "V55 for 0475 all Win.exe"
Join Date: Apr 2020
Posts: 11
And yes, Windows 7 x86 version, including running as VM,
seem to be lot simpler than x64 counterpart.
Do you have a working link for the V55 software ?
Last edited by cossie1; 01-31-2022, 01:27 AM.
01-30-2022, 05:49 PM #24
Originally posted by cossie1
gixxer Do you have a working like for the V55 software ?
Senior Member
I am trying with tool 0386.
Join Date: Mar 2020
Posts: 152
Location: RTP NC
02-03-2022, 05:34 PM #25
Originally posted by gixxer
gixxer Following? And bend to solder, i would think.
Senior Member
https://www.amazon.com/Proto-Advanta...s%2C289&sr=8-2
Join Date: Mar 2020 Not it.
Posts: 152
Location: RTP NC Following would work, or its equivalent,
https://www.samtec.com/products/fts-105-01-l-dv-p-tr
There is place to request samples as well. Mine came overnight fedex.
02-11-2022, 06:02 PM #26
Originally posted by horoto
Does anyone have any idea on how to get it to work correctly
gixxer with an MSS54HP and ST chips in BDM mode?
Senior Member
The eeproms are ST M29F400BB, however it is recognized as
AMD 29F800BT in the FGTech BDM software.
In fact, running "Read Ext Flash" extracts 1024 kb of bin file.
Join Date: Mar 2020
With this file, if I try "write Ext Flash" again, there seems to be
Posts: 152
no problem connecting to BDM because the flash seems to be
Location: RTP NC
working properly.
Looking closely at the file, 0x00000 -> 0x7FFFF section and
0x80000 -> 0xFFFFF section have the same binary.
Of course in these setup I can't write a 512 kb CSL
master/slave binary.
Using tool-0386, which is the clone FGTech V54 i have, using the 1 MB
as it was read for writing and recheck with reads afterwards show it
does seem to work with ST Micro's, it's just that writing does 2 passes,
with second pass writing the same 512 KB data on top of first pass,
since there is no A16 line.
Previous
1
2
Default Style
HELP CONTACT US PRIVACY GO TO TOP
Powered by vBulletin® Version 5.6.6
Copyright © 2022 MH Sub I, LLC dba vBulletin. All rights reserved.
All times are GMT-8. This page was generated at 01:10 AM.
