ORTHODONTIC

INSTRUMENTS

Japanese-made Supreme Quality Instruments

CHARACTERISTIC OF STAINLESS STEEL Disinfection : Making power of harmful microorganism
lower to the human body
HEAD DENTAL instruments are basically made from the marten- Concise processing – Boiling disinfection / Filtration
sitic stainless steel. It is the most suitable material known form Chemical processing – Disinfectant (chemical solution)
the dental instruments because the proper hardness, strength,
and toughness can be realized by hear treatment. The stainless ① Dry the instruments completely after sterilization. Oiling at the
steel is a kind of metal alloy that forms on surface stable film joint is recommended for the instruments with moving parts
effective is damaged. Please care the instruments as following such as forceps, pliers, and needle-holders.
procedures to use for a long term.
※ Glutaral is recommended to use. Do not use the following
solution. Sodium hypochlorite, Benzalkonium chloride,

USUAL CARE Benzathonium chloride, Povidone-Iodine, Phenol,

Formaldehyde, Chlorhexidine Guluconate, Functional Water
● Lubricate periodically on all instruments with hinges, locks and (super-acid water, oxidation water), Household detergent
the other moving parts such as forceps, pliers, scissors and
needle-holders.
Sterilization : Removal of microorganism for asepsis
● Sharpness of blades decreases by wear-out or damage. Concise processing – Autoclave
When the sharpness becomes dull, ask us resharpening or Chemical processing – EOG (ethylene oxide gas)

reconditioning without delay.

① Recommended the sterilization by autoclave or by EOG.
② Use the autoclave below temperature of 132°C (269.6°F) in
dry room.
CARE AFTER USE
③ Do not use the high pressure steam sterilization with the
Washing : Flush visible stains and tissue. medicine made of alcoholic content.
Concise processing – washing by hand / ultrasonic cleaner ④ Keep the instruments dry.
Chemical processing – cleaning agent / ultrasonic cleaner with
cleaning agent

① Check if the instrument is in good condition to use it again.

② Flush blood, fat or protein from the surface before it dries.
③ Cleaning agent is which rust prevention is effective is
recommended. Use it according to directions of the
manufacturer.
④ Water temperature from 40°C to 60°C (104°F to 140°F) is the
most effective in the ultrasonic cleaner. Place instruments in
open position in a way that they do not touch each other on a
tray in order to avoid insufficient cleaning.
⑤ Pliers with blades such as cutters should avoid ultrasonic-
cleaning. The blades can be damaged due to vibration.
Cutting Pliers
Pin & Ligature Cutters 1
Hard Wire Cutters 2
Ligature Cutters 2
Distal End Cutters 3
Flat Cutters 4
Wire Cutters 4
Utility Pliers
How Pliers 5
Weingart Utility Plier 5
Weingart Utility Pliers 6
Bending Pliers
Loop Forming Pliers 7
Torquing Pliers 8
Bird Beak Pliers 9
Light Wire Pliers 9
Facebow Adjusting Pliers 10
Wire Bending Pliers 11
Cinch Back Pliers 12
Quad Helix Bending Pliers 12
Arch Forming Instrument
Arch Forming Pliers 13
Arch Turret 14
Banding Pliers
Band Removing Pliers 15
Band Contouring Pliers 16
Banding Instrument
Elastic Separating Pliers 17
Band Pusher 17
Bonding Instrument
Bracket Placers 18
Bracket Positioning Gauge 18
Ligating Instrument
Ligating Instrument 19
Debonding Pliers
Bracket Removing Pliers 23
Bond Removing Pliers 24
Crimping Pliers
Hook Crimping Pliers 25
Replacements
Replacement Parts 26
orthodontic instruments
CUTTING PLIERS
PIN & LIGATURE CUTTERS
1/1

6043W 6053W 6056S

Pin & Ligature Cutter Pin & Ligature Cutter Miniature Pin & Ligature Cutter Slim
Maximum Cutting Capacity Maximum Cutting Capacity Maximum Cutting Capacity
Ligature wires up to .016” Ligature wires up to .016” Ligature wires up to .015”
Elastic Ligatures Elastic Ligatures Length: 126mm
Length: 119mm Length: 116mm MSRP: $139.10
MSRP: $166.90 MSRP: $166.90

6046 6056 HS-15

Pin & Ligature Cutter Pin & Ligature Cutter Miniature Pin & Ligature Cutter
Maximum Cutting Capacity Maximum Cutting Capacity Maximum Cutting Capacity
Soft wires up to .015” Soft wires up to .015” Ligature wires up to .016”
Length: 120mm Length: 120mm Elastic Ligatures
MSRP: $139.10 MSRP: $139.10 Length: 120mm
MSRP: $139.10

5 10 15 20

1 ORTHODONTIC INSTRUMENTS
 HARD WIRE CUTTER
1/1

6066S 6206 6046H

Pin & Ligature Cutter Slim Angular Ligature Cutter 45° Angled Hard Wire Cutter
Maximum Cutting Capacity Maximum Cutting Capacity Maximum Cutting Capacity
Soft wires up to .015” Soft wires up to .015” Hard wires up to .020” round
Length: 120mm Length: 122mm Length: 119mm
MSRP: $139.10 MSRP: $139.10 MSRP: $139.10

LIGATURE CUTTERS
1/1
The smallest possible edges with the angle of
40 degrees allow easy access to the lingual
area and offer wide view into the mouth.
Two models are available in the same cutters.
The operation can choose one of two; regular
or reversed edges according to operative area.
It assumes proper operation in a wide view.
The curve of the handle was conventionally
located below with the sharper curving line. It
allows stable feeling of grip in operation at the
hard to reach area.

P-410
Reversed Ligature Cutter 40° Angled
Maximum Cutting Capacity
Ligature wires up to .008”
Length: 134mm
MSRP: $166.90

P-400
Ligature Cutter 40° Angled
Maximum Cutting Capacity
Ligature wires up to .008”
Length: 134mm
MSRP: $166.90

5 10 15 20

ORTHODONTIC INSTRUMENTS
2
orthodontic instruments
CUTTING PLIERS
DISTAL END CUTTERS 1/1

5503 5503S
Distal End Safety Cutter Distal End Safety Cutter
Maximum Cutting Capacity Maximum Cutting Capacity
Rectangular wires up to .022”×.028” Rectangular wires up to .022”×.028”
Round wires up to .020” Round wires up to .020”
Braided wires up to .016” Braided wires up to .016”
Length: 115mm Length: 120mm
MSRP: $155.00 MSRP: $155.00

5503SF
Distal End Safety Cutter Slim Flush Cut
Maximum Cutting Capacity
Rectangular wires up to .022”×.028”
Round wires up to .020”
Braided wires up to .021”×.025”
Length: 121mm
MSRP: $174.80
Flush Cut permits to cut wires flush to 10°
buccal tubes.
Holds any size of wires made of
stainless steel or Nit-Ti alloy at the 5503SL
hold ring in heat-proof rubber. Distal End Safety Cutter
Maximum Cutting Capacity
Rectangular wires up to .022”×.028”
Round wires up to .020”
Braided wires up to .016”
Length: 147mm
MSRP: $155.00

9503
Replacement Hold Ring (10/pk.)
MSRP: $17.00

Refer Tip List on P.26 for details

5 10 15 20

3 ORTHODONTIC INSTRUMENTS
 FLAT CUTTER 1/1

1/1

▼
30-550FL
Distal End Safety Cutter Flush Cut Long Handle
Maximum Cutting Capacity Maximum Cutting Capacity
Rectangular wires up to .022”×.028” Cut at top: φ1.0mm
Round wires up to .020” Cut at side: φ1.2mm
Braided wires up to .021”×.025” Length: 132mm
Length: 147mm MSRP: $95.40
MSRP: $174.80

9503
Replacement Hold Ring (10/pk.)
MSRP: $17.00

Refer Tip List on P.26 for details

WIRE CUTTERS 1/1

10°

0046 WIRE NIPPER #3

Power Cutter
Wire Nipper
Maximum Cutting Capacity
Maximum Cutting Capacity
Hard & Soft wires up to 1.5mm (0.059”)
Hard & Soft wires up to 1.2mm (0.047”)
Length: 168mm
Length: 153mm
MSRP: $59.90
MSRP: $81.00

5 10 15 20

ORTHODONTIC INSTRUMENTS
4
orthodontic instruments
UTILITY PLIERS
HOW PLIERS 1/1

3066T 3066 3076

How Pliers How Pliers How Pliers Small
Tips: 3.2mm (1/8”) diameter Tips: 3.2mm (1/8”) diameter Tips: 2.4mm (3/32”) diameter
Length: 138mm Length: 138mm Length: 138mm
MSRP: $127.20 MSRP: $95.40 MSRP: $95.40

WEINGART UTILITY PLIER

3086 5046
How Pliers Offset Weingart Utility Pliers
Tips: 3.1mm (1/8”) diameter Length: 147mm
Length: 136mm MSRP: $95.40
MSRP: $95.40

5 10 15 20

5 ORTHODONTIC INSTRUMENTS
WEINGART UTILITY PLIERS
1/1

5023T 5016T
Pin & Ligature Cutter Weingart Utility Pliers
Weingart Utility Pliers Length: 136mm
Length: 127mm MSRP: $127.20
MSRP: $131.10

5016 HS-20
Weingart Utility Pliers Weingart Utility Pliers
Length: 136mm Length: 128mm
MSRP: $95.40 MSRP: $95.40

5 10 15 20

ORTHODONTIC INSTRUMENTS
6
orthodontic instruments
BENDING PLIERS
LOOP FORMING PLIERS
1/1

0746 2136 3056

Young Pliers Jarabak Pliers Loop Forming Pliers
Maximum Bending Capacity Maximum Bending Capacity Maximum Bending Capacity
Wires up to .040” Wires up to .020” Wires up to .022”
Length: 120mm Length: 127mm Length: 125mm
MSRP: $95.40 MSRP: $95.40 MSRP: $103.30

9806
Replacement Tip (1/pk.)
.043” and .063” diameter
MSRP: $17.00

9716
Hex Wrench (1/pk.)
MSRP: $2.00

Refer Tip List on P.26 for details

3046 3046S 3046TR

Tweed Loop Forming Pliers Omega Loop Forming Pliers Tweed Loop Forming Pliers
Maximum Bending Capacity Maximum Bending Capacity Maximum Bending Capacity
Wires up to .022” Wires up to .022” Rectangular wires up to .022”×.028”
Length: 131mm Length: 132mm Length: 124mm
MSRP: $95.40 MSRP: $95.40 MSRP: $143.00

5 10 15 20

7 ORTHODONTIC INSTRUMENTS
 1.9

φ1.3

φ1.8
1/1
φ2.2

4306CK 3026
Kim Pliers with Cutter Nance Closing Loop Pliers
Maximum Bending Capacity Maximum Bending Capacity
Rectangular wires up to .016”×.022” Wires up to .022”
Length: 121mm Beaks are parallel at .020” opening
MSRP: $174.80 Length: 117mm
MSRP: $95.40

TORQUING PLIERS 1/1

3036T 3036
Tweed Arch Bending Pliers Tweed Arch Bending Pliers
Maximum Bending Capacity Maximum Bending Capacity
Rectangular wires up to .022”×.028” Rectangular wires up to .022”×.028”
Beaks are .060” wide, parallel at .020” opening Beaks are .043” wide, parallel at .020” opening
Length: 117mm Length: 117mm
MSRP: $127.20 MSRP: $127.20

5 10 15 20

ORTHODONTIC INSTRUMENTS
8
orthodontic instruments
BENDING PLIERS
BIRD BEAK PLIERS 1/1

.040".040"

3143T 3146
Bird Beak Pliers Bird Beak Pliers
Maximum Bending Capacity Maximum Bending Capacity
Wires up to .032 Wires up to .030”
Length: 117mm” Length: 117mm
MSRP: $131.10 MSRP: $95.40

LIGHT WIRE PLIERS

1/1

.027".027" .027".027"

3153C 3153T 3156

Light Wire Pliers with Cutter – Grooved Square Tip Light Wire Pliers – Grooved Square Tip Light Wire Pliers – Grooved Square Tip
Maximum Bending Capacity Maximum Bending Capacity Maximum Bending Capacity
Wires up to .020” Wires up to .020” Wires up to .018”
Length: 120mm Length: 120mm Length: 124mm
MSRP: $139.10 MSRP: $131.10 MSRP: $95.40

5 10 15 20

9 ORTHODONTIC INSTRUMENTS
 1/1

.027".027" .027".027"

3163C 3163T 3163

Light Wire Pliers with Cutter Light Wire Pliers Light Wire Pliers
Maximum Bending Capacity Maximum Bending Capacity Maximum Bending Capacity
Wires up to .020” Wires up to .020” Wires up to .018”
Length: 120mm Length: 120mm Length: 124mm
MSRP: $139.10 MSRP: $131.10 MSRP: $95.40

FACE BOW ADJUSTING PLIERS 1/1

0096
Head Gear Pliers
Maximum Bending Capacity
Wires up to .051” (1.3mm)
Length: 140mm
MSRP: $103.30

5 10 15 20

ORTHODONTIC INSTRUMENTS
10
orthodontic instruments
BENDING PLIERS
WIRE BENDING PLIERS 1/1

3136T 3136 3136L

Three Jaw Pliers Three Jaw Pliers Heavy Three Jaw Pliers
Maximum Bending Capacity Maximum Bending Capacity Maximum Bending Capacity
Wires up to .028” Wires up to .028” Wires up to .036”
Length: 120mm Length: 125mm Length: 122mm
MSRP: $131.10 MSRP: $95.40 MSRP: $95.40

.040".040" .050".050" .035".035"

2146T 3146TL 3146TS

Adams Pliers (Universal) Heavy Wire Bending Pliers Wire Bending Pliers
Maximum Bending Capacity Maximum Bending Capacity Maximum Bending Capacity
Wires up to .040” Wires up to .047” (1.2mm) Wires up to .028” (0.7mm)
Length: 132mm Length: 140mm Length: 120mm
MSRP: $119.20 MSRP: $155.00 MSRP: $139.10

5 10 15 20

11 ORTHODONTIC INSTRUMENTS
 CINCH BACK PLIERS
1/1

By simply selecting either left or right side

of the head along with gripping method,
you can bend wire in “cinch-back” for both
directions, buccal and lingual, at both jaw
sides, left and right, on both jaw positions,
upper and lower.

2246T 9006
Stop Pliers Tie Back Pliers In order to achieve secure-grip, anti-slip
Maximum Bending Capacity Maximum Bending Capacity finish is applied on both sides of head
where wire is bent.
Wires up to .025” Ni-Ti Wires up to .025”
Length: 121mm Length: 135mm
MSRP: $131.10 MSRP: $139.10

QUAD HELIX BENDING PLIERS 1/1

9706
Replacement Tip (1/pk.)
.063” (1.6mm) diameter
MSRP: $17.00

9716 2016L 2016R

Hex Wrench (1/pk.) Angled Three Jaw Pliers – Left Angled Three Jaw Pliers – Right
MSRP: $2.00 Maximum Bending Capacity Maximum Bending Capacity
Wires up to .036” (0.9mm) Wires up to .036” (0.9mm)
Refer Tip List on P.26 for details Length: 130mm Length: 130mm
MSRP: $147.00 MSRP: $147.00

2026T Used for small adjustment of quad helix or

Quad Helix Bending Pliers lingual arch. Narrow beaks allow easy access
to lower jaw.
Maximum Bending Capacity
Wires up to .036” (0.9mm)
Length: 125mm
MSRP: $155.00

5 10 15 20

ORTHODONTIC INSTRUMENTS
12
orthodontic instruments
ARCH FORMING INSTRUMENTS
ARCH FORMING PLIERS
1/1

3036T 3036
Tweed Arch Bending Pliers Tweed Arch Bending Pliers
Maximum Bending Capacity Maximum Bending Capacity
Rectangular Wires up to .022” × .028” Rectangular Wires up to .022” × .028”
Beaks are .060” wide, parallel at .020” opening Beaks are .043” wide, parallel at .020” opening
Length: 117mm Length: 116mm
MSRP: $127.20 MSRP: $95.40

0066 2236TG 2236T

Hollow Chop Pliers Arch Forming Pliers - Grooved Arch Forming Pliers – Non-grooved
Maximum Bending Capacity Grooves are of .016”, .018” and .022” Length: 116mm
Wires up to .022” Length: 116mm MSRP: $131.10
Length: 125mm MSRP: $139.10
MSRP: $95.40

5 10 15 20

13 ORTHODONTIC INSTRUMENTS
ARCH TURRET (ARCH FORMER) 1/1

8406
Arch Turret (Arch Former)
Length: 105mm
MSRP: $155.00

AVAILABILITY OF
SLOT SIZE & TORQUE (○:YES ×:NO)
SLOT
SIZE .016" .017" .018" .0215"
TORQUE
0° ○ ○ ○ ○
7° ○ × ○ ○

14 ° ○ × ○ ○

5 10 15 20

ORTHODONTIC INSTRUMENTS
14
orthodontic instruments
BANDING PLIERS
BAND REMOVING PLIERS
1/1

9836 9836
Replacement Peek Tip (3/pk.) Replacement Peek Tip (3/pk.)
MSRP: $13.00 MSRP: $13.00

Refer Tip List on P.26 for details Refer Tip List on P.26 for details

1046T 1046TL
Posterior Band Removing Pliers Posterior Band Removing Pliers - Long
Length: 131mm Length: 131mm
MSRP: $139.10 MSRP: $139.10

9866
Replacement Aluminum Tip (3/pk.)
MSRP: $10.00 HS-986
Replacement Aluminum Tip (3/pk.)
MSRP: $10.00
Refer Tip List on P.26 for details
Refer Tip List on P.26 for details

1046 HS-30
Posterior Band Removing Pliers Posterior Band Removing Pliers
Length: 131mm Length: 131mm
MSRP: $95.40 MSRP: $95.40

5 10 15 20

15 ORTHODONTIC INSTRUMENTS
BAND CONTOURING PLIERS
1/1

2086 2126
Band Contouring Pliers Crown Contouring Pliers
Length: 124mm Length: 123mm
MSRP: $149.00 MSRP: $149.00

3176 3176S
Crown Crimping Pliers Crown Crimping Pliers – Small
Length: 117mm Length: 119mm
MSRP: $149.00 MSRP: $149.00

5 10 15 20

ORTHODONTIC INSTRUMENTS
16
orthodontic instruments
BANDING INSTRUMENTS
ELASTIC SEPARATING PLIERS
1/1

7016
Elastic Separating Pliers
Length: 163mm
MSRP: $119.20

BAND PUSHERS
1/1

8106
Band Pusher
Length: 133mm
MSRP: $66.00

8106A
Band Pusher – Silicone Handle
Length: 133mm
MSRP: $72.00

8116
Band Pusher – Trihedral Handle
Length: 142mm
MSRP: $66.00

5 10 15 20

17 ORTHODONTIC INSTRUMENTS
BONDING INSTRUMENTS
BRACKET PLACERS
1/1

8156
Bracket Placing Tweezers
Length: 140mm
MSRP: $47.70

8906
Bracket Setting Tweezers
Length: 175mm
MSRP: $56.60

Triple angled tip achieves better visibility as well

as operation. Thin tips fit in the wing of bracket.
The tip surface tangible to bracket is finished
flat for secure grip.

2716D
Diamond Tweezers
Length: 155mm
MSRP: $56.60

BRACKET POSITIONING GAUGE

1/1

8306
Boon Bracket Positioning Gauge
Length: 64mm
Height: 3.5mm / 4.0mm / 4.5mm / 5.0mm
MSRP: $55.70

5 10 15 20

ORTHODONTIC INSTRUMENTS
18
orthodontic instruments
LIGATING INSTRUMENTS
LIGATING INSTRUMENTS
1/1

1016C 1026 2256T

Ligature Tying Pliers – Coon Type Ligature Tying Pliers Ligature Forming Pliers
Length: 165mm Length: 165mm Length: 121mm
MSRP: $139.10 MSRP: $127.20 MSRP: $131.10

215N
Ligature Instrument – Mathieu Type
Length: 155mm
MSRP: $103.30

5 10 15 20

19 ORTHODONTIC INSTRUMENTS
 1/1

2166
Elastic Placing Pliers – Hook Tip
Length: 142mm
MSRP: $111.30

2156R
Ligating Pliers – Round Head
Length: 150mm
MSRP: $111.30

Round tips allow secure wire-hold and shorten ligating

time. Extremely smooth open and close achieved by the
cross spring adopted greatly reduces operation fatigue.

2176
Ligating Pliers
Length: 155mm
MSRP: $111.30

5 10 15 20

ORTHODONTIC INSTRUMENTS
20
orthodontic instruments
LIGATING INSTRUMENTS
LIGATING INSTRUMENTS 1/1
▲
｜
｜
｜
｜
｜
41mm
｜
｜
｜
｜
｜
▲

Comparing with the standard HOW pliers, this is

2196 new model forms a narrow oval between the closed
Ligature Utility Pliers handles. The width between two handles measures
Length: 147mm about 1cm less than the regular HOW pliers and it
MSRP: $111.30 allows rotating of the pliers easily.

The newest concept in utility pliers for ligating operation

with module or ligature as well as the other multiple
services HOW pliers offer.

Operation with module Operation with ligature wire

2186
Elastic Separating Pliers
Length: 122mm
MSRP: $61.20

801N 802N
Mosquito Forceps – Standard Mosquito Forceps – Standard
Length: 122mm Length: 122mm
MSRP: $51.70 MSRP: $51.70

5 10 15 20

21 ORTHODONTIC INSTRUMENTS
 1/1

8176
Ligating and Director
Length: 172mm
MSRP: $42.80

8186
Ligature Director – Double End
Length: 164mm
MSRP: $42.80

8196
Ligature Director
Length: 147mm
MSRP: $38.80

8166
Ligature Director
Length: 175mm
MSRP: $42.80

8196D
Diamond Ligature Director
Length: 149mm
MSRP: $42.80

The diamonds are electrodeposited in the point. Being not to slide, wire can be placed properly.

5 10 15 20

ORTHODONTIC INSTRUMENTS
22
orthodontic instruments
DEBONDING PLIERS
BRACKET REMOVING PLIERS
1/1

P-200
Bracket Removing Pliers
Length: 122mm
MSRP: $155.50

The blades can catch the bracket’s

edge by sliding on the surface of the 3346T
teeth and come beneath the Direct Bond Attachment Removing Pliers – Angled
attachment without efforts. The Length: 126mm
blade edge comes to touch at point, MSRP: $139.10
not a line contact, it reduces
resistance for easy control.

3356T HS-25 HS-26

Direct Bond Attachment Removing Direct Bond Attachment Removing Direct Bond Attachment Removing
Pliers – Straight Pliers – Straight Pliers – Angled
Length: 127mm Length: 121mm Length: 123mm
MSRP: $139.10 MSRP: $95.40 MSRP: $95.40

5 10 15 20

23 ORTHODONTIC INSTRUMENTS
 1/1

P-500
Lingual Bracket Removing Pliers
Length: 153mm
The system that deforms MSRP: $185.50
bracket for removal by
applying force at both
sides of bracket reduces
patient’s fatigue. Well-rounded shape of inside tips
achieves its secure touch to un-smooth
surface in the lingual side of mouth.

BOND REMOVING PLIERS 1/1

P-210
Bond Removing Pliers
Length: 137mm
MSRP: $155.50

9836
Replacement Peek Tip (3/pk.)
Refer Tip List on P.31 for details 3326T
MSRP: $13.00 Bond Removing Pliers
Length: 135mm
P-211 MSRP: $149.00
Replacement Metal Tip (1/pk.)
Both ends can use
MSRP: $24.00 98716
Replacement Metal Tip (1/pk.)
MSRP: $25.00

98726
9716 Replacement Tube (15cm/pk.)
Hex Wrench (1/pk.) MSRP: $7.00
MSRP: $2.00
Refer Tip List on P.26 for details
Refer Tip List on P.26 for details

5 10 15 20

ORTHODONTIC INSTRUMENTS
24
orthodontic instruments
CRIMPING PLIERS
HOOK CRIMPING PLIERS
1/1

Pressing mechanism (Front view)

4466
Hook Crimping Pliers
Length: 116mm
MSRP: $127.20
Installing a hook

For quick and precise installation of

P-220 hook on arch-wires.
Hook Crimping Pliers
Length: 119mm
MSRP: $155.50

The beak that has unique grip from

pressures a hook firmly on the wire to
lock securely. The flat handle of
PROTHO lightens stress on the plain.

5 10 15 20

25 ORTHODONTIC INSTRUMENTS
REPLACEMENTS

9503
Replacement Hold Ring (10/pk.)
MSRP: $17.00
Use with 5503SF / 5503FL

P-211
Replacement Metal Tip (1/pk.)
Both ends can use
MSRP: $24.00
Use with P-210

9706
Replacement Tip (1/pk.)
.063” (1.6mm) diameter
MSRP: $17.00
Use with 2026T

9806
Replacement Tip (1/pk.)
.043” and .063” diameter
MSRP: $17.00
Use with 3046TR

9836
Replacement Peek Tip (3/pk.)
MSRP: $13.00
Use with P-210 / 1046T / 1046TL

9866
Replacement Aluminum Tip (3/pk.)
MSRP: $10.00
Use with 1046

HS-986
Replacement Aluminum Tip (3/pk.)
MSRP: $10.00
Use with TS-30 / P-210 / 1046T / 1046TL

98716
Replacement Metal Tip (1/pk.)
MSRP: $25.00
Use with 3326T

98726
Replacement Tube (15cm/pk.)
MSRP: $7.00
Use with 3326T

9716
Hex Wrench (1/pk.)
MSRP: $2.00
Use with 2026T / 3046TR / P-210

Tips look similar but not interchangeable

5 10 15 20

ORTHODONTIC INSTRUMENTS
26
17972 Sky Park Circle, Suite J
Irvine, CA 92614
Phone : 949-474-0176
Fax : 949-474-1736

www.headdental.com