SPECIFICATION

3.5” TFT display

With Touch Panel

 Active Matrix TFT LCD module with touch panel

 320 x RGB x 480 Dots
 65K/262K Colors
 Interfaces: 8080 8/9/16/18 bit MCU
16/18 bit RGB
3/4 wire SPI
 Connection Type: FPC Socket

Part Number: FDS320x480(55.5x84.96)RGE-35R

Page 1 of 5
Focus Display Solutions ® ©2014 Focus Display Solutions
 Features:
1. 3.5” TFT-LCD with Touch Panel
2. 65K/262 COLORS
3. DRIVER IC: ILI9488V
4. OP: -20°C~70°C / ST: -30°C~80°C
5. ROHS Compliant

Page 2 of 5
Focus Display Solutions ® ©2014 Focus Display Solutions
 GENERAL DESCRIPTION
 3.5” (diagonal), 320xRGBx480
 Transmissive/Normally White TFT module
 Viewing Direction: 6 o’clock
 Driving IC: ILI9488V or equivalent
 250 NITS
 8080 8/9/16/18 bit MCU, 3/4 wire SPI, 16/18 bit RGB interface options

General Specifications
PARAMETER SPECIFICATIONS UNIT
55.5(W) x 84.96(H) x 3.65(D) mm
Outline dimensions
(Exclude FPC, cables of backlight)
View area 50.96(W) x 75.44(H) mm
LCD active area 48.96(W) x 73.44(H) mm
Driver element TFT Active Matrix with touch panel -
Pixel arrangement RGB Vertical Stripe -
Pixel pitch 0.153(W) x 0.153(H) mm

ELECTRICAL Maximum Rating

ITEM SYMBOL MIN MAX UNIT NOTE
Digital Supply voltage VDD -0.3 4.6 V
Digital Interface Supply voltage VDDIO -0.3 4.6 V

ELECTRICAL Specifications
PARAMETER SYMBOL MIN TYP MAX UNIT REMARK
Digital supply voltage VDD 2.4 3.3 4.2 V
Digital interface supply voltage VDDIO 1.65 3.3 4.2 V
Normal mode current consumption IDD -- 8 -- mA
VIH 0.7VDDIO VDDIO V
Level input voltage
VIL GND 0.3VDDIO V
VOH 0.8VDDIO VDDIO V
Level output voltage
VOL GND 0.2VDDIO V

Page 3 of 5
Focus Display Solutions ® ©2014 Focus Display Solutions
 Interface Pin Connections
PIN NO. SYMBOL DESCRIPTION I/O
1 GND Ground P
2 LEDA Anode pin of backlight P
3 LEDK1 Cathode pin of backlight P
4 LEDK2 Cathode pin of backlight P
5 LEDK3 Cathode pin of backlight P
6 LEDK4 Cathode pin of backlight P
7 LEDK5 Cathode pin of backlight P
8 LEDK6 Cathode pin of backlight P
9 GND Ground P
10 GND Ground P
11 VCC Supply voltage (3.3V) P

12 VCC Supply voltage (3.3V) P

This signal will reset the device and must be applied to properly
13 RESET I
initialize the chip.
Chip select input pin (“Low” enable).
14 CSX I
Fix this pin at VCI or GND when not in use.
This pin is used to select “Data or Command” in the parallel
interface. When D/CX = ‘1’, data is selected. When D/CX = ‘0’,
15 RS command is selected. This pin is used serial interface clock in 3- I
wire 9-bit / 4-wire 8-bit serial data interface.
Fix this pin at VCI or GND when not in use.
The data is applied on the rising edge of the SCL signal. If not
16 WRX(SPI-SCL) used, Second Data lane in 2 data lane serial interface. I
Fix this pin at VCI or GND when not in use.
This data is applied on the rising edge of the SCL signal. If not
17 RDX used, Second Data lane in 2 data lane serial interface. I
Fix this pin at VCI or GND when not in use.
Data lane in 1 data lane serial interface. The data is latched on
18 SPI-SDA I
the rising edge of the SCL signal.
SPI interface output pin.
19 SDO --The data is output on the falling edge of the SCL signal. I
--If not used, let this pin open.
18-bit parallel bi-directional data bus for MCU system and RGB
20-37 DB0-DB17 interface mode. I/O
Fix to GND level when not in use.

Page 4 of 5
Focus Display Solutions ® ©2014 Focus Display Solutions
 Interface Pin Connections (continued)
PIN NO. SYMBOL DESCRIPTION I/O
38 DE Data enable signal for RGB interface operation. I
Dot clock signal for RGB interface operation.
39 PCLK I
Fix this pin at VCI or GND when not in use.
Line synchronizing signal for RGB interface operation.
40 HSYNC I
Fix this pin at VCI or GND when not in use.
Frame synchronizing signal for RGB interface operation.
41 VSYNC I
Fix this pin at VCI or GND when not in use.
42 IM2 MPU Parallel interface bus and serial interface select. I
43 IM1 If use RGB interface must select serial interface. I
44 IM0 Fix this pin at VCI and GND. I
45 GND Ground P
46 YU(NC) Touch panel Top Film Terminal A/D
47 XL(NC) Touch panel Left Glass Terminal A/D
48 YD(NC) Touch panel Bottom Film Terminal A/D
49 XR(NC) Touch panel Right Glass Terminal A/D
50 GND Ground P

Environmental Conditions
Operating Temperature Storage Temperature
ITEM (Topr) (Tstg) REMARK
MIN MAX MIN MAX
Operating Temperature -20°C +70°C -30°C +80°C Dry
Note 1: Product cannot sustain at extreme storage conditions for long time.

Page 5 of 5
Focus Display Solutions ® ©2014 Focus Display Solutions