SITRAIN – Digital Industry Academy

SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

Training Center

Digital Industry Academy

SITRAINTM THAILAND

Training Course Catalog 2022

1. Introduction
2. Course content
3. Course Schedule
4. Terms and Condition
5. Registration Channel

SITRAINTM THAILAND Page 1 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

1. Introduction

SITRAIN™ THAILAND
Siemens Industry is committed to quality and excellence. Responding to needs in the local market, The
Training Center in Thailand was established in 1998. With assistance from our “parent” training center in
Nuremberg, Germany, SITRAIN™ Thailand offers training programs with a wide range of industrial
automation and drive technology courses including SIMATIC PLC : SIMATIC S7, TIA Portal, PCS7,
WinCC, Sinamics, Simotion, Switching and Routing in Industrial Networks with SCALANCE &
RUGGEDCOM and Security in Industrial Networks with SCALANCE & RUGGEDCOM.

Training Center in Bangkok :

Charn Issara Tower II, Room No. 1&2 on 31st floor, 2922/320-323 New Petchburi Road, Bangkapi,
Huaykwang, Bangkok 10310

Programming Device in class room

SITRAINTM THAILAND Page 2 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

2. Course Content
Simatic S7-Programming Courses

1. ST-S7PRO1
SIMATIC S7 Programming 1
Description
This course is directed at users with engineering experience in the fields of configuring, design and commissioning of
SIMATIC S7 programmable controllers. The course provides an optimal entry level to the product-specific and in depth
supplementary courses.
Objectives/Content
• System overview
• Ability to structure, generate, document and put into operation extensive PLC programs with SIMATIC S7
• Being acquainted with the structure and execution of programs in SIMATIC S7 programmable controllers and the
structure of the IEC 1131 automation standard.
• Ability to use the STEP 7 tools for generating, documenting and testing of programs and for troubleshooting, module
configuration and parameter assignment.
• Ability to use absolute and symbolic addressing
• Being in a position to evaluate system information of the programmable controller
• Being able to handle data types, data storage and archiving
• Configuring and implementing homogeneous communication links via the MPI interface
• Being acquainted with the basics of the integrated DP-interface.
The knowledge gained on all these aspects is consolidated by practical exercises using the S7-300 programmable
controller and a plant model
Prerequisites requirements: Automation background
Duration 5 days

SITRAINTM THAILAND Page 3 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

2. ST-S7STOE
SIMATIC S7 Troubleshooting
Description
This course is directed at users working in the fields of operation, maintenance and assembly who have already acquired
a knowledge of SIMATIC S7 in their particular field of activity. The course focuses mainly on the detection and correction
of faults in both hardware and software.
Objectives/Content
• Gaining familiarity with the system and program documentation and learning how to use it
• Becoming acquainted with the STEP 7 software for detecting and correcting faults and learning how to use it
• Checking the hardware and software of a system
• Recognizing and eliminating software faults resulting in stop
• Recognizing and eliminating logical software errors, e.g. multiple assignment
• Saving and documenting the program changes made
• Diagnosing program errors using I STACK and B STACK
• Extended test functions
• Troubleshooting in networked programmable controllers
• Program corrections using optional packages
Prerequisites requirements: ST-S7PRO1
Duration 4 days

SITRAINTM THAILAND Page 4 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

TIA Portal SIMATIC Programming 1 (Basic) Course

TIA-PRO1
Course Description / Objective
The Totally Integrated Automation Portal (TIA Portal) forms the work environment for integrated engineering with SIMATIC
STEP 7 and SIMATIC WinCC.
In this first part of the SIMATIC TIA Portal programming training, we teach you the handling of the TIA Portal, basic
knowledge about the structure of the SIMATIC S7 automation system, configuration and parameterization of hardware,
and the basics of standard PLC programming. You also receive an overview of HMI and PROFINET IO.
After attending the course, you can do the following:

- Understand the fundamentals of interaction of the TIA components

- Solve simple programming tasks using elementary STEP 7 instructions
- Reliably operate the "TIA Portal" engineering platform
- Program simple plant functions with basic STEP 7 instructions in the ladder
- diagram (LAD) or function block diagram (FBD)
- Perform simple commissioning of TIA components
Course Content
• Overview and significant performance characteristics of the SIMATIC S7
system family
• The components of the TIA Portal: STEP 7, WinCC, communication
• Program execution in automation systems
• STEP 7 block types and program structuring
• Binary and digital operations in the function block diagram (FBD)
• Programming of parameterizable blocks
• Data management with data blocks
• Programming organizational blocks
• Test tools for system information, troubleshooting, and diagnostics
• Hardware configuration and parameterization of the SIMATIC S7 modules,
a PROFINET IO system (ET-200), a Touch Panel
• Program documentation and saving
• Deeper understanding of contents through practical exercises on the SIMATIC S7-1500 system model
Prerequisites requirements: Automation background
Duration 5 days

SITRAINTM THAILAND Page 5 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

TIA Portal SIMATIC Programming 2 (Intermediate) Course

TIA- PRO2 (S7-1500)

Course Description / Objective

The Totally Integrated Automation Portal (TIA Portal) forms the work environment for integrated engineering with SIMATIC
STEP 7 and SIMATIC WinCC.
The second part of the SIMATIC TIA Portal programming training is based on the knowledge of the TIA Portal gained in
the SIMATIC S7 TIA Portal programming 1 course, including STEP 7, SIMATIC S7, HMI, connection of drives, and
PROFINET IO. You will expand your knowledge of complex operations in statement lists (STL) and in Structured Control
Language (SCL). Along with analog value processing and data administration with complex data types, the evaluation and
handling of program-related errors are also considered. Building on this, you will learn how to display messages on the
operator control and monitoring system (HMI). Thanks to the knowledge imparted, you will gain new impetus and ideas for
efficient PLC programming

After attending the course, you can do the following:

- Understand the interaction of TIA components

- Apply classical program development methods
- Solve comprehensive programming tasks
- Program advanced functions such as indirect addressing in STEP 7 statement ts (STL) and in Structured Control
Language (SCL)
- Implement data administration with the SIMATIC S7 automation system
- Apply system blocks along with blocks from the standard STEP 7 library
- Program classical software error handling and evaluation
- Configure alarms of the operator control and monitoring system (HMI)
- Configure TIA system components consisting of SIMATIC S7, HMI, PROFINET IO, and drive
Course Content
• Tools for program creation (e.g. structograms)
• Analog value processing
• Functions, function blocks, and multi-instances using the IEC-compliant timer/counter as an example (International
Electro technical Commission)
• Jump commands and battery operations
• Indirect addressing
• Classical software error handling and evaluation with error organization blocks (OBs)
• Evaluation of diagnostic data
• Troubleshooting and alarms with an HMI device (Touchpanel)
• Introduction into Structured Control Language (SCL) and S7-GRAPH
• Deeper understanding of contents through practical exercises on SIMATIC S7-1500 system model
Prerequisites requirements: TIA Portal SIMATIC Programming 1 course
Duration 5 days

SITRAINTM THAILAND Page 6 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

Simatic S7-1200 Basic Course

TIA MICRO-1

Course Description / Objective

The Totally Integrated Automation Portal (TIA Portal) for SIMATIC S7-1200 forms the work environment for integrated
engineering with SIMATIC STEP 7 Basic and SIMATIC WinCC Basic.
In this first part of the SIMATIC TIA Portal S7-1200 training, we teach you the handling of the TIA Portal, basic knowledge
about the structure of the SIMATIC S7-1200 automation system, configuration and parameterization of hardware, and the
basics of programming. You will learn how to clear simple hardware faults and software errors in the SIMATIC S7-1200
automation system and to create, modify and expand small STEP 7 programs. You will thus be capable of reducing
downtime. You will also get an overview on operator control and monitoring

Course Content

• Overview and significant performance characteristics of the SIMATIC S7-1200 system family
• The components of the TIA Portal: SIMATIC STEP 7 Basic and WinCC Basic
• Program execution in automation systems
• Binary and digital operations in the function block diagram (FBD)
• Setup and assembly of the SIMATIC S7-1200 automation system
• Addressing and wiring the signal modules
• Hardware and software commissioning of the SIMATIC S7-1200 with the TIA Portal
• SIMATIC S7-1200 hardware configuration and parameterization
• Introduction to the Touchpanel
• Saving and documentation of the implemented program changes with the TIA Portal
• Deeper understanding of contents through practical exercises on SIMATIC S7-1200 system model

Prerequisites requirements: Automation background

Duration 3 days

SITRAINTM THAILAND Page 7 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

Simatic WinCC Course

ST-BWINCCS
SIMATIC WinCC

Description
The course is directed at configuring engineers, commissioning engineers, decision-makers and service personnel. Simple
examples help the trainees to obtain the necessary basic knowledge allowing them to use the system quickly and easily
for their own applications.

Objectives/Content
• Overview of the WinCC system
• Starting a project, connection of the PLC, var. simulation
• Graphics
• Alarm display, alarm logging
• Curve display, tag logging
• User archives
• Report Designer (demonstration)
• Background processing (demonstration of Global Scripts)
• Openness of the API (demonstration of its structure and uses)
• Practical exercises

Prerequisites requirements: ST-S7PRO1

Duration 5 days

SITRAINTM THAILAND Page 8 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

SIMATIC WinCC on the machine level in the TIA Portal Course

(TIA-WCCM)

Course Description / Objective

The Totally Integrated Automation Portal (TIA Portal) constitutes the work environment for integrated engineering with
SIMATIC STEP 7 and SIMATIC WinCC. The course provides you with the knowledge to quickly and easily configure
machine and plant-specific HMI tasks using the SIMATIC WinCC software based on the TIA Portal. You will learn to
design and dynamize graphic images. You will learn how to archive messages and values and to design and implement
the corresponding archives. You can effectively use the engineering phase thanks to what you have learned about reliably
operating the system.

After attending the course, you can do the following:

Efficiently and reliably operate SIMATIC WinCC based on the "TIA Portal" engineering platform Understand and edit
SIMATIC WinCC projects for machine-level applications Optimally create graphic images Implement archiving concepts
for alarms and values Access specific values from the SIMATIC S7 and display and further process them in the operator
control and monitoring system (HMI)
Course Content
• System overview TIA Portal, SIMATIC WinCC (machine-level)
• Creating a SIMATIC WinCC project
• Configuration of connection to the SIMATIC S7 automation system
• Basics of graphic image creation for operator control and monitoring
• User administration
• Alarm display, alarm logging, alarm configuration
• Tag logging, trend configuration, trend display
• Recipes
• Use of various HMI stations
• Deeper understanding of contents through practical exercises on SIMATIC S7-1500 system model

Prerequisites requirements: Simatic WinCC Course

Duration 3 days

SITRAINTM THAILAND Page 9 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

Simatic PCS7 Course

ST-PCS7_P1
SIMATIC PCS7

Description
This course is directed at users with engineering experience in the fields of configuring, design and commissioning of
Simatic PCS7. The course provides programming basic PCS7 and understands architecture of the system. The training
unit is stand alone system. (One AS one OS/ES)

Objectives/Content
• Managing the project data in the SIMATIC Manager
• Station and network configuration
• Configuraton of AS functions in CFC
• Configuration of monitoring and controlling in the OS
• Configuration of sequences in SFC
• User blocks - attributes and visualization
• Syntax rules for SIMATIC PCS 7 engineering
Prerequisites requirements: ST-S7PRO1 & WINCC
Duration 5 days

SITRAINTM THAILAND Page 10 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

SINAMICS S120 Parameterizing and Commissioning

DR-S12-PM

Short Description
DR-S12-PM (Old Course Code - DR-SNS-SI)

Aims & Objectives

This training course encompasses the basics of the SINAMICS S120 drive system. It provides the technical knowledge
required for startup, parameterization, drive optimization, and troubleshooting.
Practical exercises for reinforcing the knowledge gained are carried out on the SINAMICS S120 Training Case. On
completion of the course, you will be able to implement automation solutions with the SINAMICS S120. You can carry out
startup and optimization of the SINAMICS S120 quickly and effectively with skilful use of the STARTER commissioning
tool. In this way, you reduce engineering costs and minimize downtimes in your plant.
You can gain advanced knowledge of communication with PROFIBUS.

Content
• Design of the drive system and overview of documentation and service
• Startup and parameterization with the STARTER commissioning tool
• Diagnostics and troubleshooting
• Fundamentals of communication via PROFIBUS
• Software functions, closed-loop control and optimization of SERVO and VECTOR drives
• Startup of the integral basic positioner (EPOS)
• Practical exercises on the Training Kit

Prerequisites requirements:

A general knowledge of electrical engineering and good PC skills is sufficient for taking part in this course.

Duration 5 Days

SITRAINTM THAILAND Page 11 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

SINAMICS S120 Parameterizing and Commissioning in the TIA Portal

DR-S12-PMT

Aims & Objectives

You are responsible for the commissioning of SINAMICS S120 drive systems using the commissioning software Startdrive in TIA
Portal.
Modern converter systems offer a variety of functions and setting possibilities. By a purposeful procedure you can save time and
avoid faults.
In this course you will learn the procedure at commissioning step by step. You can handle parameter setting and data saving with
the software Startdrive in the TIA Portal. By a correct parameter setting you support the reliable operation of the entire pl ant.
After the course you can put the converter system SINAMICS S120 efficiently into operation. You can adapt the parameters of
the closed-loop controller to the respective application and use the diagnostic tools in case of a fault.

Content
Design and functional principle of the converter system SINAMICS S120:
• Control unit, line infeed and motor modules
• Motors, encoders and interfaces

Parameterization, data backup and diagnostics using Software Startdrive in the TIA Portal:
• Online connection via PROFINET and Ethernet
• Project structure: drive objects and drive components
• Topology of the DRIVE-CLiQ-Interface

Function charts: setpoint channel, Input and output signals

Control signals and internal signal interconnection using BiCo-technology
Optimization of the closed loop control using automatic procedures
Functional principle of the operating modes Servo and Vector
Analysis of the operating status using enable signals, warnings and alarms
Monitoring of signals using the trace function
Introduction to positioning and Safety Integrated
Data exchange with SIMATIC S7 via PROFINET using PROFIdrive Standard Telegram
Practical exercises at training kits with SINAMICS S120 in frame size booksize with servomotor and induction motor

Prerequisites requirements:

A general knowledge of electrical engineering and good PC skills is sufficient for taking part in this course.

Duration 5 Days

SITRAINTM THAILAND Page 12 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

SIMOTION System and Programming Course

MC-SMO-SYS

Description/Objective

You will learn how to configure and start up the SIMOTION Motion Control system with the associated drives and
visualization devices. The course also includes the programming of movement sequences with the help of Motion Control
Chart and ladder diagram/function block diagram.

The technologies positioning, synchronous operation, probe, and cam plates are explained and reinforced by means of
practice-oriented examples.
The course enables you to use SIMOTION optimally in the automation of production machinery.
The programming course (MC-SMO-PRG) builds on this to deal in depth with the creation of parameterizable blocks.

Content
• System overview of SIMOTION
• Components of SIMOTION
• SCOUT engineering system and option packages
• Hardware platforms
• Motion control technology packages
• Creating a project with SCOUT
• Starting up and optimizing axes
• Programming user programs with MCC (Motion Control Chart) and LAD/FBD
• Runtime system (task system) configuring
• Learning to use tools for fault diagnostics
• Performing practical exercises on training devices

Prerequisites requirements: DR-SNS-SI

Duration 5 Days

SITRAINTM THAILAND Page 13 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

SIMOTION Programming

MC-SMO-PRG

Description/Objective
Building on the knowledge gained in the SIMOTION system and programming course, you will learn the advanced
programming facilities with Structured Text and Motion Control Chart.
The applications for the technologies are reinforced using selected examples on our exercise equipment.
On completion of the course, you will be able to create parameterizable blocks such as FCs and FBs with the help of the
Structured Text language. With knowledge of the cam plate function, you will be able to parameterize and program cam
plate synchronization. This extends your scope for creating programs for your production machine.

Content
• Introduction to creating user programs with Structured Text
• Creating variables and data structures in ST-Units
• Creating re-usable blocks (FCs and FBs)
• Programming commands for motion control
• Creating cam plates with CAM EDIT and using system functions
• Parameterizing and programming cam plate synchronization
• Overview of communication with OPC and UDP
• Practical exercises using application examples

Prerequisites requirements:

SIMOTION knowledge according to the course MC-SMO-SYS

Duration 5 Days

SITRAINTM THAILAND Page 14 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

Switching and Routing in Industrial Networks with SCALANCE

IK-SWIROS

Description/Objective
An industrial or industry-related environment without Ethernet is no longer conceivable. A high degree of reliability
and sufficient capacities are demanded from hard-wired industrial networks. At the same time, a secure connection of
these Ethernet networks to an existing network structure as well as the seamless integration into a corporate network
is highly required.
At the end of the course, you are familiar with the special requirements of industrial network solutions and will have
the knowledge to plan, implement, and provide support for plain networks in an industrial or industry-related
environment.

Content

Switching:
• Comparison of Ethernet and Industrial Ethernet
• Typical topologies
• Redundancy mechanisms (MRP, HRP, Standby Redundancy, Protocol, RSTP, Passive Listening, HSR, PRP)
• Network segmentation with VLANs
• Special industrial functions
• Diagnostics and troubleshooting
Routing:
• IPv4 basics (addressing, data exchange, important protocols)
• Static routing
• Router redundancy (VRRP)
• Dynamic routing (RIP, OSPF)
• Diagnostics and troubleshooting

Duration 5 Days

SITRAINTM THAILAND Page 15 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

Switching and Routing in Industrial Networks with RUGGEDCOM

IK-SWIROR

Description/Objective
Ethernet has found its way into the industrial environment. A high degree of reliability and throughput rates are
demanded from industrial networks. At the same time a reliable integration into a corporate network is highly required.
At the end of the course, participants will be familiar with the special requirements of industrial network solutions and
will have the knowledge to plan, implement, and provide support for plain networks in an industrial or industry-related
environment.

Content

Switching:
• Layer 2 Technology Overview
• Switching in Industrial Ethernet Networks
• Commissioning with RUGGEDCOM Operating System (ROS)
• Port Configuration
• Redundancy in Switched Networks (Rapid Spanning Tree Protocol)
• Network segmentation with Virtual Local Area Networks (VLAN)
• Increasing bandwidth availability (Link Aggregation)
• Integrating Serial Protocols
• Monitoring (ROS)
• Diagnostics and Troubleshooting (ROS)
Routing:
• Layer 3 Technology Overview
• Commissioning with ROX Operating System
• LAN and IP interfaces
• WAN interfaces
• Internet Protocol Services
• Router redundancy (VRRP)
• Static Routing
• Dynamic Routing (OSPF)

Duration 5 Days

SITRAINTM THAILAND Page 16 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

Security in Industrial Networks with SCALANCE

IK-SECIN-S

Description/Objective
It is difficult to imagine day-to-day industrial operations without Ethernet connections. From large-scale production
systems to the smallest Industrial Ethernet communication networks, nearly everything has come to depend on their
reliability and security. The opportunities on the one hand are countered by risks on the other hand. Access by
outsiders or manipulation in the network always has catastrophic consequences for production or in-house expertise.
Therefore, functioning security systems are an absolute must.
At the end of this course, you will know the requirements and fundamentals needed to plan, implement, and provide
support for industrial security measures.

Content
• Current trends and security risks
• Defense-in-depth with Siemens - a holistic security concept
• Update and replacement of security components
• Potential threats in a network
• Basic security measures (ports, passwords, protocols, etc.)
• Cell protection concept
• Access restriction
• Connection of standard machines to networks
• Remote access via VPN
• Comprehensive exercises using the SIMATIC NET product portfolio

Duration 3 Days

SITRAINTM THAILAND Page 17 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

Security in Industrial Networks with RUGGEDCOM

IK-SECIN-R
Description/Objective
It is difficult to imagine day-to-day industrial operations without Ethernet connections. From large-scale environment
to the smallest Industrial Ethernet communication network, nearly everything has come to dependency on the overall
systems reliability and security. The opportunities on the one hand are countered by risks on the other hand. Access
by outsiders or manipulations in the network always has catastrophic consequences on application or on in-house
expertise. Therefore, functioning security systems are an absolute must.
At the end of this course, participants will understand the requirements and fundamentals needed to plan, implement,
and provide support for industrial security measures.

Content
• Understanding what threats lurk Industrial Ethernet networks
• Defense-in-depth approach
• Security measures and guidelines (best practices, industry driven)
• Hardening the RUGGEDCOM product line
• Protecting Control Networks (firewall, address translation (NAT))
• Site to Site and Remote access via VPN (IPsec)
• Comprehensive exercises using the SIMATIC NET product portfolio

Duration 3 Days

SITRAINTM THAILAND Page 18 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

Ethernet Fundamentals in Industrial Networks

IK-ETHBAS
Description/Objective
The Industrial Ethernet Fundamentals course provides a broad overview in network technology and mechanisms
which are the foundation of today's digital communication. Ever heard of the OSI reference model? This course will
give you the insight and takes you on a tour through all seven layers.

Upon completion the participants will gain a foundation knowledge of networking and its applications in industrial
environments and will be prepared for the certification trainings of the Siemens Industrial Networks Education
program.
measures.

Content

Introduction to Industrial Ethernet

• Layer 1 - Physical Layer

• Layer 2 - Data Link Layer

• Layer 3 - Network Layer

• Layer 4 - 7

Duration 2 Days

SITRAINTM THAILAND Page 19 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

3. Course Schedule

Please see the attached file for Training Course Schedule.

Training programs are scheduled at fixed dates during the year. To register, please let us know at least two
weeks before course schedule in advance. The minimum participants for per class is 6/8 paxs. If the course
registration participants do not meet the minimum no. of paxs, the class will be re-scheduled. - Course
registration is on first-come-first-served basis.

On-Site Training
We also provide training on-site at your company premises with Extra Charge. On-site training arrangements
should be made at least one month before the starting date of the course. Please contact the training
coordinator.

Contact Person

Training Coordination : K. Pattaranan Varisanont Tel : (66) 91-576-3151

Fax : (662) 715-4841, 4861
Email : Industrymarketing.th@siemens.com

4. Terms and Condition

1. Registration closes when the course is full.

2. Course fees are payable in advance at least one week before course start. Payment can be made by
cheque payable to SIEMENS LTD.
3. 100% cancellation fee, if participant cancels the course after receiving the official course confirmation.
4. Course Price includes Coffee Breaks and Lunch.
5. Price is not included Hotel accommodation.

General Condition for Trainee

Certificates will only be issued to participants with 75% attendance and course fee fully paid to Siemens.

SITRAINTM THAILAND Page 20 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand
SITRAIN – Digital Industry Academy
SITRAINTM THAILAND
Training Course Catalog 2022

Cut down your costs, increase your productions efficiently with the knowledge of PLC’s Siemens technology

5. Registration Channel
SITRAIN only accept training reservation by e-Pass system, therefore it is mandatory for trainees to
register e-Pass in advanced.

Registration at : https://e-pass.aae.siemens.cloud/dashboard

SITRAINTM THAILAND Page 21 of 21

Tel. +66 915763151 Fax. (662) 715 4841, 4861 Hotline : +66 81-827-3892
e-mail : Industrymarketing.th@siemens.com website http:// https://e-pass.aae.siemens.cloud/dashboard
Charn Issara Tower II, Training room No. 1&2 on 31st floor
2922/320-323 New Petchburi Road ,Bangkapi, Huaykwang Bangkok 10310 Thailand