Scribd
Upload
56 views1 page

OR 64x4.8

This document provides cross-sectional properties for an OR 64x4.8 structural shape. It lists key geometric properties like depth, thickness, and radii. It then summarizes important structural properties including sectional area, moments of inertia, radii of gyration, section moduli, shear area, torsional properties, and plasticity limits. Plastic and elastic properties are both included to help characterize the structural behavior of the shape.

Uploaded by

kim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views1 page

OR 64x4.8

This document provides cross-sectional properties for an OR 64x4.8 structural shape. It lists key geometric properties like depth, thickness, and radii. It then summarizes important structural properties including sectional area, moments of inertia, radii of gyration, section moduli, shear area, torsional properties, and plasticity limits. Plastic and elastic properties are both included to help characterize the structural behavior of the shape.

Uploaded by

kim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

 Cross-Section Properties

OR 64x4.8
Geometry
OR 64x4.8
Depth h 64.0 mm
 IMCA
Thickness t 4.8 mm  --
Outer corner radius ro 9.6 mm 64.0

Inner corner radius ri 4.8 mm


Depth of straight portion of web d 44.8 mm 4.8
4.8

Sectional Area

64.0
Sectional area A 10.58 cm y

Bending
Area moment of inertia about y-axis Iy 59.10 cm
Polar area moment of inertia Ip 118.20 cm
Radius of gyration about y-axis iy 23.6 mm z

[mm]
Polar radius of gyration ip 33.4 mm

Statical moment of area about y-axis max Sy 5.73 cm


Elastic section modulus about y-axis Wy 18.68 cm

Shear
Shear area in y-direction Ay 4.62 cm

Torsion
Torsional constant It 103.08 cm
Torsional constant (St. Venant) It,StVen 0.66 cm
Torsional constant (Bredt) It,Bredt 102.41 cm
Secondary torsional constant It,s 0.47 cm
Section modulus for torsion Wt 28.93 cm

Warping
Warping ordinate with respect to shear center max ω 0.28 cm
Warping constant with respect to shear center Iω 0.31 cm
Warping radius of gyration with respect to shear iω 0.5 mm
center
Warping section modulus with respect to shear center Wω 1.11 cm
Warping statical moment with respect to shear center max Sω 0.12 cm

Plasticity
Plastic section modulus about y-axis W pl,y 23.43 cm
Plastic shape factor about y-axis αpl,y 1.254 --

Plastic shear area in y-direction Apl,y 5.68 cm


Plastic limiting normal force Npl 253.085 kN

Plastic limiting shear force in y-direction Vpl,y 77.108 kN

Plastic limiting bending moment about y-axis Mpl,y 5.51 kNm

Other
Weight G 8.3 kg/m
Surface area per unit length Am 0.240 m /m
Volume V 1058.00 cm /m
Section factor Am/V 226.388 1/m

Cell area Acell 34.60 cm

You might also like