3130704

Digital Fundamentals

Module 1:
Fundamentals of Digital
Systems and Logic families

Prof. Krunal D. Vyas

9601901005
[email protected]
 Topics to be covered
▪ Logic Gates
▪ Boolean Algebra
▪ Number Systems
▪ Codes
▪ Logic Family Terminology

Introduction: Digital Fundamentals 2 Darshan Institute of Engineering & Technology

 Logic Gates
▪ Most basic logical unit of the digital system is gate circuit
▪ Types of gate circuits are as follows
1. AND Gate
2. OR Gate
3. NOT Gate (Inverter)
4. NOR Gate
5. NAND Gate
6. XOR Gate
7. XNOR Gate

Introduction: Digital Fundamentals 3 Darshan Institute of Engineering & Technology

 1. AND Gate
▪ AND Gate has an output which is normally at logic level “0” and
only goes “HIGH” to a logic level “1” when ALL of its inputs are at
logic level “1”

2-input AND Gate Logic Notation

A
B C
Truth Table
A B C
0 0 0
0 1 0
1 0 0
1 1 1
Introduction: Digital Fundamentals 4 Darshan Institute of Engineering & Technology
 2. OR Gate
▪ OR Gate or Inclusive-OR gate has an output which is normally at
logic level “0” and only goes “HIGH” to a logic level “1” when one
or more of its inputs are at logic level “1”.
2-input OR Gate Logic Notation
A
B C
Truth Table
A B C
0 0 0
0 1 1
1 0 1
1 1 1
Introduction: Digital Fundamentals 5 Darshan Institute of Engineering & Technology
 3. NOT (Inverter) Gate
▪ NOT gate has an output which is always opposite to input level.

Inverter Gate Logic Notation

A C
Truth Table
A C
0 1
1 0

Introduction: Digital Fundamentals 6 Darshan Institute of Engineering & Technology

 4. NOR Gate
▪ NOR Gate is an OR gate followed by an inverter.

2-input NOR Gate Logic Notation

A
C
B
Truth Table
A B C
0 0 1
0 1 0
1 0 0
1 1 0

Introduction: Digital Fundamentals 7 Darshan Institute of Engineering & Technology

 5. NAND Gate
▪ NAND Gate is an AND gate followed by an inverter.

2-input NAND Gate Logic Notation

A
B C
Truth Table
A B C
0 0 1
0 1 1
1 0 1
1 1 0

Introduction: Digital Fundamentals 8 Darshan Institute of Engineering & Technology

 6. Exclusive-OR (X-OR) Gate
▪ X-OR gate that has 1 state when one and only one of its two inputs
assumes a logic 1 state and has 0 state when all of its input are
same.
▪ Also known as anti-coincidence gate or inequality detector.
2-input XOR Gate Logic Notation
A
B C
Truth Table
A B C
0 0 0
0 1 1
1 0 1
1 1 0
Introduction: Digital Fundamentals 9 Darshan Institute of Engineering & Technology
 7. Exclusive-NOR (X-NOR) Gate
▪ X-NOR gate that has 1 state when all of its input are same and has
0 state when one of its input has 0 state and other input is 1 state.
▪ Also known as equality detector.

2-input XNOR Gate Logic Notation

A
B C
Truth Table
A B C
0 0 1
0 1 0
1 0 0
1 1 1
Introduction: Digital Fundamentals 10 Darshan Institute of Engineering & Technology
 NAND as Universal Gate
(AB)’ ((AB)’)’ =
A AB
A A’
B
NOT using NAND AND using NAND

A’
A
(A’B’)’ = (A+B)
B
B’
OR using NAND

Introduction: Digital Fundamentals 11 Darshan Institute of Engineering & Technology

 NOR as Universal Gate
(A+B)’ ((A+B)’)’ = A+B
A
A A’
B
NOT using NOR OR using NOR

A’
A
(A’+B’)’ = AB
B
B’
AND using NOR

Introduction: Digital Fundamentals 12 Darshan Institute of Engineering & Technology

 Boolean Algebra
▪

``

Introduction: Digital Fundamentals 13 Darshan Institute of Engineering & Technology

 Boolean Algebra
▪

Introduction: Digital Fundamentals 14 Darshan Institute of Engineering & Technology

 Boolean Algebra
▪

Break the line change the sign

Introduction: Digital Fundamentals 15 Darshan Institute of Engineering & Technology

  
L.H.S. R.H.S.

A B C A+B+C
0 0 0 0 1 1 1 1 1
0 0 1 1 0 1 1 0 0
0 1 0 1 0 1 0 1 0
0 1 1 1 0 1 0 0 0
1 0 0 1 0 0 1 1 0
1 0 1 1 0 0 1 0 0
1 1 0 1 0 0 0 1 0
1 1 1 1 0 0 0 0 0
From truth table, it is clearly visible that L.H.S. = R.H.S. Hence, the complement
of a sum of variables is equal to the product of their individual complements.
Introduction: Digital Fundamentals 16 Darshan Institute of Engineering & Technology
  
L.H.S. R.H.S.

A B C ABC
0 0 0 0 1 1 1 1 1
0 0 1 0 1 1 1 0 1
0 1 0 0 1 1 0 1 1
0 1 1 0 1 1 0 0 1
1 0 0 0 1 0 1 1 1
1 0 1 0 1 0 1 0 1
1 1 0 0 1 0 0 1 1
1 1 1 1 0 0 0 0 0
From truth table, it is clearly visible that L.H.S. = R.H.S. Hence, the complement
of a product of variables is equal to the sum of their individual complements.
Introduction: Digital Fundamentals 17 Darshan Institute of Engineering & Technology
 Reducing Boolean Expression
▪

(Distributive law)
(Distributive law)
(A.A = A)

(1 + A = 1)

Introduction: Digital Fundamentals 18 Darshan Institute of Engineering & Technology

 Reducing Boolean Expression
▪

(DeMorgan’s law)
(DeMorgan’s law)
(Distributive law)
(Distributive law)
(A.A’ = 0)
(Distributive law)
(A.A’ = 0)

Introduction: Digital Fundamentals 19 Darshan Institute of Engineering & Technology

 Exercise
▪

Introduction: Digital Fundamentals 20 Darshan Institute of Engineering & Technology

 Number
Systems

Unit – 1: Binary Systems & Logic Circuits Darshan Institute of Engineering & Technology
 Common Number Systems
System Base Symbols Used by Used in
Humans? Computers?
Decimal 10 0, 1, … 9 Yes No
Binary 2 0, 1 No Yes
Octal 8 0, 1, … 7 No No
Hexa- 16 0, 1, … 9, No No
decimal A, B, … F

Introduction: Digital Fundamentals 22 Darshan Institute of Engineering & Technology

 Quantities / Counting
Hexa- Hexa-
Decimal Binary Octal Decimal Binary Octal
decimal decimal
0 0 0 0 8 1000 10 8
1 1 1 1 9 1001 11 9
2 10 2 2 10 1010 12 A
3 11 3 3 11 1011 13 B
4 100 4 4 12 1100 14 C
5 101 5 5 13 1101 15 D
6 110 6 6 14 1110 16 E
7 111 7 7 15 1111 17 F

Introduction: Digital Fundamentals 23 Darshan Institute of Engineering & Technology

 Conversion among Bases
▪ Possibilities

Decimal Octal

Binary Hexadecimal

▪ Example

2510 = 110012 = 318 = 1916 Base

Introduction: Digital Fundamentals 24 Darshan Institute of Engineering & Technology

 Decimal to Binary
Decimal Binary

▪ Technique
• Divide by two, keep track of the remainder
• First remainder is bit 0 (LSB, least-significant bit)
• Second remainder is bit 1 and so on

Introduction: Digital Fundamentals 25 Darshan Institute of Engineering & Technology

 Example (Decimal to Binary)

12510 = ?2 2 125 1
2 62 0
2 31 1
2 15 1
2 7 1
2 3 1
2 1 1
0
12510 = 11111012

Introduction: Digital Fundamentals 26 Darshan Institute of Engineering & Technology

 Example (Decimal to Binary)

0.687510 = ?2
integer fraction
0.6875 x 2 = 1.3750 1 + 0.3750
0.3750 x 2 = 0.7500 0 + 0.7500
0.7500 x 2 = 1.5000 1 + 0.5000
0.5000 x 2 = 1.0000 1 + 0.0000

0.687510 = 0.10112

Introduction: Digital Fundamentals 27 Darshan Institute of Engineering & Technology

 Exercise
▪ (32)10 = ( )2
▪ (555)10 = ( )2
▪ (12999)10 = ( )2
▪ (157.63)10 = ( )2
▪ (64.125)10 = ( )2

Introduction: Digital Fundamentals 28 Darshan Institute of Engineering & Technology

 Binary to Decimal
Binary Decimal

▪ Technique
• Multiply each bit by 2n, where n is the “weight” of the bit
• The weight is the position of the bit, starting from 0 on the right
• Add the results

Introduction: Digital Fundamentals 29 Darshan Institute of Engineering & Technology

 Example (Binary to Decimal)

101011

1 x 25 + 0 x 24 + 1 x 23 + 0 x 22 + 1 x 21 + 1 x 20
32 + 0 + 8 + 0 + 2 + 1
4310

1010112 = 4310

Introduction: Digital Fundamentals 30 Darshan Institute of Engineering & Technology

 Example (Binary to Decimal)

11. 11

1 x 21 + 1 x 20 + 1 x 2-1 + 1 x 2-2
2 + 1 + 0.5 + 0.25
3.7510

11.112 = 3.7510

Introduction: Digital Fundamentals 31 Darshan Institute of Engineering & Technology

 Exercise
▪ (11011)2 = ( )10
▪ (101101)2 = ( )10
▪ (11101111)2 = ( )10
▪ (110.011)2 = ( )10
▪ (1001.0010)2 = ( )10

Introduction: Digital Fundamentals 32 Darshan Institute of Engineering & Technology

 Decimal to Octal
Decimal Octal

▪ Technique
• Divide by eight
• Keep track of the remainder

Introduction: Digital Fundamentals 33 Darshan Institute of Engineering & Technology

 Example (Decimal to Octal)

12510 = ?8 8 125 5
8 15 7
8 1 1
0

12510 = 1758

Introduction: Digital Fundamentals 34 Darshan Institute of Engineering & Technology

 Example (Decimal to Octal)

0.687510 = ?8
integer fraction
0.6875 x 8 = 5.5000 5 + 0.5000
0.5000 x 8 = 4.0000 4 + 0.0000

0.687510 = 0.548

Introduction: Digital Fundamentals 35 Darshan Institute of Engineering & Technology

 Exercise
▪ (32)10 = ( )8
▪ (555)10 = ( )8
▪ (12999)10 = ( )8
▪ (157.63)10 = ( )8
▪ (64.125)10 = ( )8

Introduction: Digital Fundamentals 36 Darshan Institute of Engineering & Technology

 Octal to Decimal
Octal Decimal

▪ Technique
• Multiply each bit by 8n, where n is the “weight” of the bit
• The weight is the position of the bit, starting from 0 on the right
• Add the results

Introduction: Digital Fundamentals 37 Darshan Institute of Engineering & Technology

 Example (Octal to Decimal)

724

7 x 82 + 2 x 81 + 4 x 80
448 + 16 + 4

46810

7248 = 46810

Introduction: Digital Fundamentals 38 Darshan Institute of Engineering & Technology

 Example (Octal to Decimal)

43. 25

4 x 81 + 3 x 80 + 2 x 8-1 + 5 x 8-2
32 + 3 + 0.25 + 0.0781
35.328110

43.258 = 35.328110

Introduction: Digital Fundamentals 39 Darshan Institute of Engineering & Technology

 Exercise
▪ (32)8 = ( )10
▪ (555)8 = ( )10
▪ (12333)8 = ( )10
▪ (157.63)8 = ( )10
▪ (64.125)8 = ( )10

Introduction: Digital Fundamentals 40 Darshan Institute of Engineering & Technology

 Decimal to Hexa-Decimal
Hexa-Decim
Decimal
al

▪ Technique
• Divide by 16
• Keep track of the remainder

Introduction: Digital Fundamentals 41 Darshan Institute of Engineering & Technology

 Example (Decimal to HexaDecimal)

123410 = ?16 16 1234 2

16 77 13=D
16 4 4
0

123410 = 4D216

Introduction: Digital Fundamentals 42 Darshan Institute of Engineering & Technology

 Exercise
▪ (32)10 = ( )16
▪ (555)10 = ( )16
▪ (12999)10 = ( )16
▪ (157.63)10 = ( )16
▪ (64.125)10 = ( )16

Introduction: Digital Fundamentals 43 Darshan Institute of Engineering & Technology

 Hexa-Decimal to Decimal
Hexa-Decim
Decimal
al

▪ Technique
• Multiply each bit by 16n, where n is the “weight” of the bit
• The weight is the position of the bit, starting from 0 on the right
• Add the results

Introduction: Digital Fundamentals 44 Darshan Institute of Engineering & Technology

 Example (HexaDecimal to Decimal)

ABC

A x 162 + B x 161 + C x 160

10 x 162 + 11 x 161 + 12 x 160
2560 + 176 + 12
274810
ABC16 = 274810

Introduction: Digital Fundamentals 45 Darshan Institute of Engineering & Technology

 Exercise
▪ (FA8)16 = ( )10
▪ (9AC3)16 = ( )10
▪ (1A74D)16 = ( )10
▪ (1AC.9A)16 = ( )10
▪ (ABC.5AC)16 = ( )10

Introduction: Digital Fundamentals 46 Darshan Institute of Engineering & Technology

 Octal to Binary
Octal Binary

▪ Technique
• Convert each octal digit to a 3-bit equivalent binary representation

Introduction: Digital Fundamentals 47 Darshan Institute of Engineering & Technology

 Octal - Binary Table
Octal Binary
0 000
1 001
2 010
3 011
4 100
5 101
6 110
7 111
Introduction: Digital Fundamentals 48 Darshan Institute of Engineering & Technology
 Example (Octal to Binary)

7058 = ?2

7 0 5

111 000 101

7058 = 1110001012

Introduction: Digital Fundamentals 49 Darshan Institute of Engineering & Technology

 Exercise
▪ (463)8 = ( )2
▪ (2056)8 = ( )2
▪ (2057.64)8 = ( )2
▪ (6543.04)8 = ( )2
▪ (7476.47)8 = ( )2

Introduction: Digital Fundamentals 50 Darshan Institute of Engineering & Technology

 Binary to Octal
Binary Octal

▪ Technique
• Group bits in threes, starting on right
• Convert to octal digits

Introduction: Digital Fundamentals 51 Darshan Institute of Engineering & Technology

 Example (Binary to Octal)

10110101112 = ?8

001 011 010 111

1 3 2 7

10110101112 = 13278

Introduction: Digital Fundamentals 52 Darshan Institute of Engineering & Technology

 Exercise
▪ (11011)2 = ( )8
▪ (101101)2 = ( )8
▪ (11101111)2 = ( )8
▪ (110.011)2 = ( )8
▪ (1001.0010)2 = ( )8

Introduction: Digital Fundamentals 53 Darshan Institute of Engineering & Technology

 Hexa-Decimal to Binary
Hexa-Decim
Binary
al

▪ Technique
• Convert each hexadecimal digit to a 4-bit equivalent binary representation

Introduction: Digital Fundamentals 54 Darshan Institute of Engineering & Technology

 Hexa-Decimal to Binary
Hexa-Decima Binary Hexa-Decima Binary
l l
0 0000 8 1000
1 0001 9 1001
2 0010 A 1010
3 0011 B 1011
4 0100 C 1100
5 0101 D 1101
6 0110 E 1110
7 0111 F 1111

Introduction: Digital Fundamentals 55 Darshan Institute of Engineering & Technology

 Example (Hexa-Decimal to Binary)

10AF16 = ?2

1 0 A F

0001 0000 1010 1111

10AF16 = 10000101011112

Introduction: Digital Fundamentals 56 Darshan Institute of Engineering & Technology

 Exercise
▪ (FA8)16 = ( )2
▪ (9AC3)16 = ( )2
▪ (1A74D)16 = ( )2
▪ (1AC.9A)16 = ( )2
▪ (ABC.5AC)16 = ( )2

Introduction: Digital Fundamentals 57 Darshan Institute of Engineering & Technology

 Binary to Hexa-Decimal
Hexa-Decim
Binary
al

▪ Technique
• Group bits in fours, starting on right
• Convert to hexadecimal digits

Introduction: Digital Fundamentals 58 Darshan Institute of Engineering & Technology

 Example (Binary to Hexa-Decimal)

10110101112 = ?16

0010 1101 0111

2 D 7

10110101112 = 2D716

Introduction: Digital Fundamentals 59 Darshan Institute of Engineering & Technology

 Exercise
▪ (11011)2 = ( )16
▪ (101101)2 = ( )16
▪ (11101111)2 = ( )16
▪ (110.011)2 = ( )16
▪ (1001.0010)2 = ( )16

Introduction: Digital Fundamentals 60 Darshan Institute of Engineering & Technology

 Octal to Hexa-Decimal
Hexa-Decim
Octal
al

▪ Technique
• Convert Octal to Binary
• Regroup bits in fours from right
• Convert Binary to Hexa-Decimal

Introduction: Digital Fundamentals 61 Darshan Institute of Engineering & Technology

 Example (Octal to Hexa-Decimal)

10768 = ?16

1 0 7 6

001 000 111 110

0010 0011 1110

2 3 E

10768 = 23E16
Introduction: Digital Fundamentals 62 Darshan Institute of Engineering & Technology
 Exercise
▪ (463)8 = ( )16
▪ (2056)8 = ( )16
▪ (2057.64)8 = ( )16
▪ (6543.04)8 = ( )16
▪ (7476.47)8 = ( )16

Introduction: Digital Fundamentals 63 Darshan Institute of Engineering & Technology

 Hexa-Decimal to Octal
Hexa-Decim
Octal
al

▪ Technique
• Convert Hexa-Decimal to Binary
• Regroup bits in three from right
• Convert Binary to Octal

Introduction: Digital Fundamentals 64 Darshan Institute of Engineering & Technology

 Example (Hexa-Decimal to Octal)

1F0C16 = ?8

1 F 0 C

0001 1111 0000 1100

000 001 111 100 001 100

0 1 7 4 1 4

1F0C16 = 174148
Introduction: Digital Fundamentals 65 Darshan Institute of Engineering & Technology
 Exercise
▪ (FA8)16 = ( )8
▪ (9AC3)16 = ( )8
▪ (1A74D)16 = ( )8
▪ (1AC.9A)16 = ( )8
▪ (ABC.5AC)16 = ( )8

Introduction: Digital Fundamentals 66 Darshan Institute of Engineering & Technology

 Signed Binary Numbers
▪ Two ways of representing signed numbers:
▪ 1) Sign-magnitude form, 2) Complement form.
▪ Most of computers use complement form for negative number
notation.
▪ 1’s complement and 2’s complement are two different methods in
this type.

Introduction: Digital Fundamentals 67 Darshan Institute of Engineering & Technology

 1’s Complement
▪ 1’s complement of a binary number is obtained by subtracting
each digit of that binary number from 1.
▪ Example

1 1 1 1 1 1 1 . 1 1
- 1 1 0 1 - 1 0 1 . 0 1
0 0 1 0 0 1 0 . 1 0
(1’s complement of 1101) (1’s complement of 101.01)

Introduction: Digital Fundamentals 68 Darshan Institute of Engineering & Technology

 2’s Complement
▪ 2’s complement of a binary number is obtained by adding 1 to its
1’s complement.
▪ Example

1 1 1 1 1 1 1 . 1 1
- 1 1 0 0 - 1 0 1 . 0 1
0 0 1 1 0 1 0 . 1 0
+ 1 + 1
0 1 0 0 0 1 0 . 1 1
(2’s complement of 1100) (2’s complement of 101.01)
Introduction: Digital Fundamentals 69 Darshan Institute of Engineering & Technology
 Representation of negative number in 2’s
complement form
▪ Express -65.5 in 12 bit 2’s complement form.

2 65 1 0.5 x 2 = 1.0
2 32 0 So, result in 12-bit binary is as follows:
65.510 = 01000001.10002
2 16 0
For negative number, we have to
2 8 0 convert this into 2’s complement form
2 4 0
-65.510 =10111110.10002
2 2 0
2 1 1
0

Introduction: Digital Fundamentals 70 Darshan Institute of Engineering & Technology

 Exercise
▪ Express -45 in 8-bit 2’s complement form.
▪ Express -73.75 in 12 bit 2’s complement form.

Introduction: Digital Fundamentals 71 Darshan Institute of Engineering & Technology

 Accuracy in Binary Number Conversion
▪

Introduction: Digital Fundamentals 72 Darshan Institute of Engineering & Technology

 Accuracy in Binary Number Conversion
▪

Introduction: Digital Fundamentals 73 Darshan Institute of Engineering & Technology

 9’s Complement
▪ 9’s complement of a decimal number is obtained by subtracting
each digit of that decimal number from 9.
▪ Example

9 9 9 9 9 9 9 . 9 9
- 3 4 6 5 - 7 8 2 . 5 4
6 5 3 4 2 1 7 . 4 5
(9’s complement of 3465) (9’s complement of 782.54)

Introduction: Digital Fundamentals 74 Darshan Institute of Engineering & Technology

 10’s Complement
▪ 10’s complement of a decimal number is obtained by adding 1 to
its 9’s complement.
▪ Example

9 9 9 9 9 9 9 . 9 9
- 3 4 6 5 - 7 8 2 . 5 4
6 5 3 4 2 1 7 . 4 5
+ 1 + 1
6 5 3 5 2 1 7 . 4 6
(10’s complement of 3465) (10’s complement of 782.54)
Introduction: Digital Fundamentals 75 Darshan Institute of Engineering & Technology
 Subtraction using 9’s complement
▪ Obtain 9’s complement of subtrahend
▪ Add the result to minuend and call it intermediate result
▪ If carry is generated then answer is positive and add the carry to
Least Significant Digit (LSD)
▪ If there is no carry then answer is negative and take 9’s
complement of intermediate result and place negative sign to the
result.

Introduction: Digital Fundamentals 76 Darshan Institute of Engineering & Technology

 Example
1) 745.81 – 436.62
7 4 5 . 8 1 7 4 5 . 8 1
9’s complement
- 4 3 6 . 6 2 + 5 6 3 . 3 7
3 0 9 . 1 9 1 3 0 9 . 1 8
+ 1
3 0 9 . 1 9

Introduction: Digital Fundamentals 77 Darshan Institute of Engineering & Technology

 Example
2) 436.62 - 745.81

4 3 6 . 6 2 4 3 6 . 6 2
9’s complement
- 7 4 5 . 8 1 + 2 5 4 . 1 8
- 3 0 9 . 1 9 6 9 0 . 8 0
9’s complement

- 3 0 9 . 1 9
As carry is not generated, so take 9’s
complement of the intermediate
result and add ‘ – ‘ sign to the result

Introduction: Digital Fundamentals 78 Darshan Institute of Engineering & Technology

 Subtraction using 10’s complement
▪ Obtain 10’s complement of subtrahend
▪ Add the result to minuend
▪ If carry is generated then ignore it and result itself is answer
▪ If there is no carry then answer is negative and take 10’s
complement of result and place negative sign to the result.

Introduction: Digital Fundamentals 79 Darshan Institute of Engineering & Technology

 Example
1) 745.81 – 436.62
7 4 5 . 8 1 7 4 5 . 8 1
10’s complement
- 4 3 6 . 6 2 + 5 6 3 . 3 8
3 0 9 . 1 9 1 3 0 9 . 1 9

Ignore the carry

Introduction: Digital Fundamentals 80 Darshan Institute of Engineering & Technology

 Example
2) 436.62 - 745.81

4 3 6 . 6 2 4 3 6 . 6 2
10’s complement
- 7 4 5 . 8 1 + 2 5 4 . 1 9
- 3 0 9 . 1 9 6 9 0 . 8 1
10’s complement

- 3 0 9 . 1 9
As carry is not generated, so take
10’s complement of the intermediate
result and add ‘ – ‘ sign to the result

Introduction: Digital Fundamentals 81 Darshan Institute of Engineering & Technology

 Binary Addition
▪ Rules for binary addition 0+0=0
0+1=1
1+0=1
1 1 1 1 1 1 1 + 1 = 10 i.e. 0
with a carry of
1 1 0 1 . 1 0 1 1
+ 0 1 1 1 . 0 1 1
1 0 1 0 1 . 0 0 0

Introduction: Digital Fundamentals 82 Darshan Institute of Engineering & Technology

 Binary Subtraction
▪ Rules for binary subtraction 0–0=0
1–1=0
1–0=1
0 1 10 1 1 10
1 0 1 0 . 0 1 10 0 – 1 = 1, with
a borrow 1
- 0 1 1 1 . 1 1 1
0 0 1 0 . 0 1 1

Introduction: Digital Fundamentals 83 Darshan Institute of Engineering & Technology

 Binary Multiplication
10111
x 10011
10111
10111
00000
00000
10111
110110101

Introduction: Digital Fundamentals 84 Darshan Institute of Engineering & Technology

 Binary Division
110 1 0 1 1 0 1 0 111. 1
000
1 0 11
110
1010
110
1 0 01
110
110
110
000

Introduction: Digital Fundamentals 85 Darshan Institute of Engineering & Technology

 Subtraction using 1’s Complement
▪ Obtain 1’s complement of subtrahend
▪ Add the result to minuend and call it intermediate result
▪ If carry is generated then answer is positive and add the carry to
Least Significant Digit (LSD)
▪ If there is no carry then answer is negative and take 1’s
complement of intermediate result and place negative sign to the
result.

Introduction: Digital Fundamentals 86 Darshan Institute of Engineering & Technology

 Example
1) 68.75 – 27.50
6 8. 75 0100 0 10 0. 1 1 0 0
- 2 7. 50 1’s complement
+ 1110 0 10 0. 0 1 1 1
+ 4 1. 25 10 01 01 00 1. 0 0 1 1
+1
00 1 01 001. 0 1 0 0

Introduction: Digital Fundamentals 87 Darshan Institute of Engineering & Technology

 Example
2) 43.25 - 89.75
4 3. 25 0010 1 01 1. 0 1 0 0
- 8 9. 75 1’s complement
+ 1010 0 11 0. 0 0 1 1
- 4 6. 50 1 10 10 00 1. 0 1 1 1
1’s complement

0 01 01 11 0. 1 0 0 0
As carry is not generated, so take 1’s
complement of the intermediate
result and add ‘ – ‘ sign to the result

Introduction: Digital Fundamentals 88 Darshan Institute of Engineering & Technology

 Subtraction using 2’s Complement
▪ Obtain 2’s complement of subtrahend
▪ Add the result to minuend
▪ If carry is generated then ignore it and result itself is answer
▪ If there is no carry then answer is negative and take 2’s
complement of result and place negative sign to the result.

Introduction: Digital Fundamentals 89 Darshan Institute of Engineering & Technology

 Example
1) 68.75 – 27.50
6 8. 75 0100 0 10 0. 1 1 0 0
- 2 7. 50 2’s complement
+ 1110 0 10 0. 1 0 0 0
+ 4 1. 25 1 0 01 01 00 1. 0 1 0 0
Ignore Carry bit
0 01 01 00 1. 0 1 0 0

Introduction: Digital Fundamentals 90 Darshan Institute of Engineering & Technology

 Example
2) 43.25 - 89.75
4 3. 25 0010 1 01 1. 0 1 0 0
- 8 9. 75 2’s complement
+ 1010 0 11 0. 0 1 0 0
- 4 6. 50 1 10 10 00 1. 1 0 0 0
2’s complement

0 01 01 11 0. 1 0 0 0
As carry is not generated, so take 2’s
complement of the intermediate
result and add ‘ – ‘ sign to the result

Introduction: Digital Fundamentals 91 Darshan Institute of Engineering & Technology

 Binary Codes

Unit – 1: Binary Systems & Logic Circuits Darshan Institute of Engineering & Technology
 8421 BCD Code (Natural BCD Code)
▪ Each decimal digit, 0 through 9, is coded by 4-bit binary number
▪ 8, 4, 2 and 1 weights are attached to each bit
▪ BCD code is weighted code
▪ 1010, 1011, 1100, 1101, 1110 and 1111 are illegal codes
▪ Less efficient than pure binary
▪ Arithmetic operations are more complex than in pure binary
▪ Example
Decimal 1 4

BCD 0001 0100

Binary 1110
Introduction: Digital Fundamentals 93 Darshan Institute of Engineering & Technology
 Binary Codes
Decimal Binary BCD Decimal Binary BCD

0 0 0000 8 1000 1000

1 1 0001 9 1001 1001
2 10 0010 10 1010 0001 0000
3 11 0011 11 1011 0001 0001
4 100 0100 12 1100 0001 0010
5 101 0101 13 1101 0001 0011
6 110 0110 14 1110 0001 0100
7 111 0111 15 1111 0001 0101

Introduction: Digital Fundamentals 94 Darshan Institute of Engineering & Technology

 BCD Addition

2 5 0 0 1 0 0 1 0 1
+ 1 3 + 0 0 0 1 0 0 1 1
3 8 0 0 1 1 1 0 0 0
No carry, no illegal code. So, this is
the correct sum.

Introduction: Digital Fundamentals 95 Darshan Institute of Engineering & Technology

 BCD Addition

679.6 0110 0111 1001 .0110

+ 536.8 + 0101 0011 0110 .1000
1216.4 1011 1010 1111 .1110 All are illegal codes
+0110 +0110 +0110+.0110 Add 0110 to each

10001 10000 10101 1.0100 Propagate carry

+1 +1 +1 +1
0001 0010 0001 0110 .0100 Corrected Sum

Introduction: Digital Fundamentals 96 Darshan Institute of Engineering & Technology

 BCD Subtraction

3 8 0 0 1 1 1 0 0 0
- 1 5 - 0 0 0 1 0 1 0 1
2 3 0 0 1 0 0 0 1 1
No borrow. So, this is the correct
difference.

Introduction: Digital Fundamentals 97 Darshan Institute of Engineering & Technology

 BCD Subtraction

206.7 0010 0000 0110 .0111

- 147.8 - 0001 0100 0111 .1000
Borrows are
58.9 0000 1011 1110 .1111 present
-0110 -0110 -.0110 Subtract 0110
Corrected
0101 1000 .1001 difference

Introduction: Digital Fundamentals 98 Darshan Institute of Engineering & Technology

 Excess Three (XS-3) Code
▪ Excess Three Code = 8421 BCD + 0011(3)
▪ XS-3 code is non-weighted BCD code
▪ Also known as self complementing code
▪ 0000, 0001, 0010, 1101, 1110 and 1111 are illegal codes
▪ Example

Decimal 1 4

BCD 0001 0100

XS-3 0100 0111

Introduction: Digital Fundamentals 99 Darshan Institute of Engineering & Technology

 XS-3 Addition

3 7 0 1 1 0 1 0 1 0
+ 2 8 + 0 1 0 1 1 0 1 1
6 5 1 0 1 1 10 1 0 1
Propagate carry to next group +1
• Add 0011 to group 1 1 0 0 0 1 0 1
which generated carry
• Subtract 0011 to group - 0 0 1 1+ 0 0 1 1
which do not generated
carry 1 0 0 1 1 0 0 0

Introduction: Digital Fundamentals 100 Darshan Institute of Engineering & Technology

 XS-3 Addition

247.6 0101 0111 1010 .1001

+ 359.4 + 0110 1000 1100 .0111
607.0 1011 1111101101.0000 Carry generated

• Add 0011 to
+1 +1 Propagate carry

group which 1011 10000 0111 .0000

generated +1
carry
• Subtract 0011 1100 0000 0111 .0000
to group which
do not
- 0011 +0011 +0011+.0011
generated Corrected Sum
1001 0011 1010 .0011 in XS-3
carry
Introduction: Digital Fundamentals 101 Darshan Institute of Engineering & Technology
 XS-3 Subtraction

267 0101 1001 1010

- 175 - 0100 1010 1000
092 0000 1111 0010
+0011 -0011 +0011 • Subtract 0011 to
group which
0011 1100 0101 generated borrow
• Add 0011 to group
which do not
generated borrow

Introduction: Digital Fundamentals 102 Darshan Institute of Engineering & Technology

 XS-3 Subtraction

57.6 1000 1010 .1001

- 27.8 - 0101 1010 .1011
29.8 0010 1111 .1110
+0011 -0011 -.0011 • Subtract 0011 to
group which
0101 1100 .1011 generated borrow
• Add 0011 to group
which do not
generated borrow

Introduction: Digital Fundamentals 103 Darshan Institute of Engineering & Technology

 Gray Code
▪ Only one bit changes between each pair of successive code words
(Unit distance code).
▪ Gray code is a reflected code.
▪ Gray codes are designed recursively using following rules:
• 1-bit Gray code has two code words, 0 and 1.
• The first 2n code words of an (n+1)-bit Gray code equal the code words of
n-bit gray code, written in order with a leading 0 appended.
• The last 2n code words of an (n+1)-bit Gray code equal the code words of
n-bit gray code, but written in reverse order with a leading 1 appended.

Introduction: Digital Fundamentals 104 Darshan Institute of Engineering & Technology

 Gray Code
Decimal 4-bit Binary
1-bit 2-bit 3-bit 4-bit
0 00 000 0000 0 0000
1 01 001 0001 1 0001
11 011 0011 2 0010
10 010 0010 3 0011
110 0110 4 0100
111 0111 5 0101
101 0101 6 0110
100 0100 7 0111
1100 8 1000
1101 9 1001
1111 10 1010
1110 11 1011
1010 12 1100
1011 13 1101
1001 14 1110
1000 15 1111
 Binary to Gray Conversion
▪ Conversion of n-bit Binary number (B) to Gray Code (G) is as
follows:

▪ Example: Convert (1001)2 to Gray Code.

Binary 1 0 0 1

Gray 1 1 0 1

Introduction: Digital Fundamentals 106 Darshan Institute of Engineering & Technology

 Gray to Binary Conversion
▪ Conversion of n-bit Gray Code (G) to Binary Number (B) is as
follows:

▪ Example: Convert Gray code 1101 to Binary.

Gray 1 1 0 1

Binary 1 0 0 1

Introduction: Digital Fundamentals 107 Darshan Institute of Engineering & Technology

 Error-Detecting Codes
▪ Noise can alter or distort the data in transmission.
▪ The 1s may get changed to 0s and 0s to 1s.
▪ Because digital systems must be accurate to the digit, errors can
pose a serious problem.
▪ Single bit error should be detect & correct by different schemes.
▪ Parity, Check Sums and Block Parity are the examples of error
detecting code.

Introduction: Digital Fundamentals 108 Darshan Institute of Engineering & Technology

 Parity
▪ Parity bit is the simplest technique.
▪ There are two types of parity – Odd parity and Even parity.
▪ For odd parity, the parity is set to a 0 or a 1 at the transmitter such
that the total number of 1 bits in the word including the parity bit
is an odd number.
▪ For even parity, the parity is set to a 0 or a 1 at the transmitter
such that the total number of 1 bits in the word including the
parity bit is an even number.
▪ For example, 0110 binary number has “1” as Odd parity and “0” as
even parity.

Introduction: Digital Fundamentals 109 Darshan Institute of Engineering & Technology

 Parity
▪ Detect a single-bit error but can not detect two or more errors
within the same word.
▪ In any practical system, there is always a finite probability of the
occurrence of single error.
▪ E.g. In an even-parity scheme, code 10111001 is erroneous
because number of 1s is odd(5), while code 11110110 is error free
because number of 1s is even(6).

Introduction: Digital Fundamentals 110 Darshan Institute of Engineering & Technology

 Check Sums
▪ Simple parity can not detect two errors within the same word.
▪ Added to the sum of the previously transmitted words
▪ At the transmission, the check sum up to that time is sent to the
receiver.
▪ The receiver can check its sum with the transmitted sum.
▪ If the two sums are the same, then no errors were detected at the
receiver end.
▪ If there is an error, the receiving location can ask for
retransmission of the entire data.
▪ This type of transmission is used in teleprocessing system.

Introduction: Digital Fundamentals 111 Darshan Institute of Engineering & Technology

 Block Parity
01011011 0 01011011 0 01011011 0
10010101 1 10010101 1 10010101 1
01101110 0 01100110 0 01101110 0
11010011 0 11010011 0 10000011 0
10001101 1 10001101 1 10001101 1
01110111 1 01110111 1 01110111 1
01110110 0 01110110 0 01110110 0
Parity Row

Parity Column

Introduction: Digital Fundamentals 112 Darshan Institute of Engineering & Technology

 Error Correcting Code
▪ 7-bit Hamming Code is widely used error correcting code,
containing 4 bits of data and 3 bits of even parity.
▪ Pattern: P1 P2 D3 P4 D5 D6 D7
▪ Group-1: P1D3D5D7, Group-2: P2D3D6D7, Group-3: P4D5D6D7

▪ Example: Data = 1101

P 1 P 2 D 3 P 4 D 5 D 6 D7 = P 1 P 2 1 P 4 1 0 1
P 1 D3 D5 D7 = 1 1 1 1
P 2 D3 D6 D7 = 0 1 0 1
P 4 D5 D6 D7 = 0 1 0 1
▪ 7-bit Hamming Code is 1 0 1 0 1 0 1

Introduction: Digital Fundamentals 113 Darshan Institute of Engineering & Technology

 Error Correcting Code
▪ How to detect error?
▪ Example: Received data = 1001001
P 1 P 2 D 3 P 4 D 5 D 6 D7 = 1 0 0 1 0 0 1
P1 D3 D5 D7 = 1 0 0 1 (No Error)
P2 D3 D6 D7 = 0 0 0 1 (Error)
P4 D5 D6 D7 = 1 0 0 1 (No Error)
▪ The error word is 0 1 0 = 210.
▪ Complement the 2nd bit (from left).
▪ Correct code is 1 1 0 1 0 0 1

Introduction: Digital Fundamentals 114 Darshan Institute of Engineering & Technology

 Digital IC Specification
▪ Threshold voltage
▪ Propagation Delay
▪ Power dissipation
▪ Fan-in
▪ Fan-out
▪ Voltage & Current parameters
▪ Noise Margin
▪ Operating Temperatures
▪ Speed power products

Introduction: Digital Fundamentals 115 Darshan Institute of Engineering & Technology

 TTL v/s CMOS v/s ECL
Characteristic TTL CMOS ECL
Power Input Moderate Low Moderate-High
Frequency limit High Moderate Very high
Circuit density Moderate-hig High-very Moderate
h high
Circuit types per family High High Moderate
Logic Propagatio Power Noise Fan-in Fan-ou Cost
Famil n delay dissipation Margin t
y time (ns) per gate (V)
(mW)
TTL 9 10 0.4 8 10 Low
CMOS <50 0.01 5 10 50 Low
ECL 1 50 0.25 5 10 High

Introduction: Digital Fundamentals 116 Darshan Institute of Engineering & Technology

 Transistor Transistor Logic (TTL)
▪ Dependence on transistors alone to perform basic logic
operations.
▪ Most popular logic family.
▪ Most widely useful bipolar digital IC family.
▪ The TTL uses transistors operating in saturated mode.
▪ It is the fastest of the saturated logic families.
▪ Good speed, low manufacturing cost, wide range of circuits, and
the availability in SSI and MSI are its merits.

Introduction: Digital Fundamentals 117 Darshan Institute of Engineering & Technology

 Schottky TTL
▪ When a transistor is saturated, excess charge carries will be stored
in the base region and they must be removed before the transistor
can be turned off.
▪ So, owing to storage time delay, the speed is reduced.
▪ The Schottky TTL series reduces this storage time delay by not
allowing the transistor to go into full saturation.
▪ This is accomplished by using a Schottky barrier diode(SBD)
between the base and the collector of each transistor.
▪ More than three times the switching speed of standard TTL, at the
expense of approximately doubling the power consumption.

Introduction: Digital Fundamentals 118 Darshan Institute of Engineering & Technology

 Tri-state TTL
▪ It utilizes the advantage of the high speed of operation of the
totem-pole configuration and wire ANDing of the open-collector
configuration.
▪ It is called the tri-state TTL, because it allows three possible output
states: HIGH, LOW, and HIGH Impedance (Hi-Z).
▪ In the Hi-Z state, both the transistors in the totem-pole
arrangement are turned off, so that the output terminal is a HIGH
impedance to ground or Vcc.
▪ In fact, the output is an open or floating terminal, that is, neither a
LOW nor a HIGH.

Introduction: Digital Fundamentals 119 Darshan Institute of Engineering & Technology