MGB Form 29-1 (Series of 2000)
Republic of the Philippines
Department of Environment and Natural Resources
MINES AND GEOSCIENCES BUREAU
Mineral Economics, Information & Publications Division
North Avenue, Diliman, Quezon City
MONTHLY REPORT ON PRODUCTION, SALES, INVENTORY OF METALLIC MINERALS AND EMPLOYMENT DATA FOR GOLD
REPORT PERIOD: MONTH ___________ YEAR ______
INSTRUCTIONS:
1. This form must be accomplished in duplicate.
2. Submit the original copy to MGB Central Office through the Mineral Economics, Information & Publications Division (MEIPD) , copy furnished the Concerned Region within 15 working days
at the end of each calendar month
3. Submission of this report is in compliance with SECTION 270, CHAPTER XXIX, OF DENR AO 96-40 or the Implementing Rules & Regulations of Republic Act No. 7942
4. Information to be supplied by the reporting Contractor/Operator should cover the period from the first day to the last day of the reporting month
5. This report form must be accomplished by Contractors/Operators producing GOLD as primary product.
6. Write within the spaces provided for your answers and do not leave any of the requirements unanswered. If a requirement does not apply to you, write NA (not applicable).
If the question is applicable to you but you have no answer, write NONE.
7. This document should be signed by the resident manager or equivalent position.
8. This report should be duly notarized.
9. For any comments, suggestions and clarifications regarding this form please consult your nearest MGB Regional Office in your area.
DEFINITIONS OF TERMS:
Mine Site refers to the location of mine where mining operations, specifically mineral extraction, takes place (Barangay, Municipality, Province)
Milling Capacity refers to the capacity of the mill used by the contractor/operator expressed in Ton Per Day (TPD).
Rated Capacity refers to the maximum fixed output of a mill or processing facility expressed in Tons Per Day (TPD). It is also the measure of the theoretical amount of material that
can be handled/recovered in any given time by the mill.
Actual Capacity refers to the attained capacity of the mill in Metric Tons Per Day (TPD). It also refers to the constant amount of material that can be recovered/handled in a given actual time per day.
Mill Recovery refers to the amount of valuable materials (metal/mineral product) obtained in an ore processing operation as compared to the total amount of waste material and is usually expressed as a percentage
of the total amount of ore processed
Milled Ore is also called "mill feed" or any ore that contains sufficient valuable minerals chosen to be further beneficiated.
Mined Ore refers to the total natural combination of minerals, especially one from which a metal like gold can be profitably extracted and expressed in DMT
Content refers to the grade of the ore or concentrate or processed products derived from operations.
Main Metal Concentrate refers to the final solid state of the product of the various metal extraction process.
Production quantity refers to the total volume of mineral extracted during the reporting period expressed in kilograms
Production value refers to the total value or gross output of mineral extracted during the reporting period as defined in Chapter 1, Section 5 of the Revised IRR of the Phil. Mining Act of 1995 (under the term "Gross Output)
Sales quantity refers to the total volume of mineral sold during the reporting period expressed in kilograms.
Sales value refers to the total value of mineral sold during the reporting period. This value includes all costs of production, taxes invoiced to purchasers, transport & trade mark-up.
Primary Product refers to the principal valuable mineral, metals or products obtainable in an ore mining and processing operations.
By Product refers to the secondary or additional valuable product obtainable in an ore mining and processing operations
Tailings the gangue and other refuse material resulting from washing, concentration or treatment of ground milling ore.
I. ADMINISTRATIVE DATA
Page 1 of 4
MGB Form 29-1 (Series of 2000)
NAME OF CONTRACTOR/OPERATOR - If name of person, please write surname first TAX IDENTIFICATION NUMBER(TIN) REPORT MONTH/YEAR
OFFICE ADDRESS TELEPHONE NO. FAX. NO. E-MAIL ADDRESS (if any)
DATE OF 1ST OPERATION (if
PROJECT NAME: CONTRACT NO(s) MERIDIONAL BLOCK(s)
new)
SITE ADDRESS: (state Barangay,Municipality, Province)
II. PRODUCTION DATA
A. MINED ORE
QUANTITY OF MINED ORE GRADE/ANALYSIS: (Fill - up as many content and unit of measure as necessary)
(DMT) Content Unit of Measure Content Unit of Measure Content Unit of Measure Content Unit of Measure Content Unit of Measure Content Unit of Measure
B. MILL PARAMETERS
MILLING CAPACITY (TPD) NO. OF DAYS IN MILL RECOVERY (%)
Rated Milling Capacity Actual Milling Capacity OPERATION
C. MILLING ORE
QUANTITY OF MILLED ORE GRADE/ANALYSIS: (Fill - up as many content and unit of measure as necessary)
(DMT) Content Unit of Measure Content Unit of Measure Content Unit of Measure Content Unit of Measure Content Unit of Measure Content Unit of Measure
D. MAIN METAL PRODUCTS (BULLION/MATTE)
GOLD PRODUCTION SILVER PRODUCTION GRADE ANALYSIS: BULLION/MATTE GOLD INVENTORY SILVER INVENTORY
QTY QTY Content Unit of Measure Content Unit of Measure Content Unit of Measure QTY QTY
(kg-1,000 VALUE (P) (kg-1,000 VALUE (P) (kg-1,000 VALUE (P) (kg-1,000 VALUE (P)
fineness) fineness) fineness) fineness)
E. GOLD & SILVER BY - PRODUCT(s)
BY-PRODUCT AVERAGE GRADE
(SPECIFY) PRODUCTION QUANTITY UNIT OF MEASURE VALUE (P) CONTENT UNIT OF MEASURE
F. TAILINGS
QUANTITY GRADE/ANALYSIS
(DMT) Content Unit of Measure Content Unit of Measure Content Unit of Measure Content Unit of Measure Content Unit of Measure Content Unit of Measure
Page 2 of 4
MGB Form 29-1 (Series of 2000)
G. Reasons for increase or decrease in production this month compared to the previous month: (pls. check appropriate answer below and use additional sheet if necessary)
Increase was due to: Decrease was due to:
1. Higher tons milled 1. Lesser operating days 3. Low metal recovery
2. Higher mill recovery 1.a Equipment breakdown (pls. specify)____________________________________________________________________ 4. Low milling ore/low
3. Expansion 1.b Unfavorable weather condition (state duration or other information) __________________________________________ tonnes mined
4. More operating days 1.c Collapse/slide in working areas (state area) )______________________________________________________________ 5. Others (pls specify)
5. Others (pls specify) 1.d Labor or other strikes (state duration)__________________________________________________________________ _____________________
_________________________ 2. Suspension due to _____________________
_________________________ 2.a Low price of the mineral commodity produced _____________________
_________________________ 2.b Market Problems (pls. specify)_________________________________________________________________________ _____________________
_________________________ 2.c Force Majeure (pls. specify)___________________________________________________________________________
_________________________ 2.d Environmental Problems (pls. specify)__________________________________________________________________
_________________________ 2.e Gov't preventive actions such as CDO (pls. specify)_______________________________________________________
2.f Financial Problems (pls. specify) _______________________________________________________________________
III. SALES & MARKETING DATA
A. SALES OF MAIN METAL PRODUCTS - BULLION & MATTE (Use additional sheet if necessary)
CONSIGNEE/BUYER ADDRESS Country of Marketing NAME OF AVERAGE GRADE QUANTITY F. O. B. VALUE ESTIMATED
Contract/Sales (kg-1,000
Destination VESSEL Content Unit of Measure PESO DOLLAR EXCISE TAX PAYABLE
Agreement No. fineness)
Name
Address
Name
Address
Name
Address
Name
Address
TOTAL
FOREIGN EXCHANGE RATE USED: _________
B. SALES OF GOLD & SILVER BY - PRODUCTS
BY - PRODUCT Marketing COUNTRY OF NAME OF AVERAGE GRADE QUANTITY UNIT F.O.B. VALUE ESTIMATED
Contract/Sales
(SPECIFY) CONSIGNEE/BUYER ADDRESS DESTINATION VESSEL Content Unit of Measure PESO DOLLAR EXCISE TAX PAYABLE
Agreement No.
Page 3 of 4
MGB Form 29-1 (Series of 2000)
IV. EMPLOYMENT DATA
Report the number of persons engaged in work at the head office and mine site during this month
TYPE OF EMPLOYEES HEAD OFFICE MINE SITE TOTAL
MALE FEMALE MALE FEMALE MALE FEMALE
1. MANAGERIAL
2. PRODUCTION
3. ADMINISTRATIVE
4. OTHERS
PREPARED BY: OFFICIAL DESIGNATION ADDRESS TELEPHONE NO.
(Signature Over Printed Name)
V. CERTIFICATION
I hereby certify that all information in this report are complete,true and correct to the best of my knowledge and belief
SIGNATURE OF REPORTING OFFICIAL OFFICIAL POSITION DATE
REPUBLIC OF THE PHILIPPINES)
) S.S.
)
Subscribed and sworn to before me this _______day of ____, 20____, the affiant exhibiting his/her Residence
Certificate No. _______, issued at _________, on the _______day of _____20____.
DOC NO.
PAGE NO NOTARY PUBLIC
BOOK NO. My Commission Expires on Dec. 31, ______
SERIES OF PTR No. __________
Page 4 of 4
