TECHNICAL DATA SHEET
Hyperion Synthetic Blend CK-4
Bel-Ray® Hyperion Synthetic Blend CK-4 is formulated for use in high-speed four-stroke cycle diesel engines designed to meet
2017 model year on-highway and Tier 4 non-road exhaust emission standards as well as for previous model year diesel engines. This oil is
formulated to use in all applications with diesel fuels ranging in sulfur content up to 500 ppm. Bel-Ray® Hyperion Synthetic Blend CK-4 is designed to
provide enhanced protection against oil oxidation, viscosity loss due to shear, and oil aeration as well as protection against catalyst poisoning, particulate
filter blocking, engine wear, piston deposits, degradation of low- and high-temperature properties, and soot-related viscosity increase.
VEHICLE BENEFITS APPLICATIONS
• Protects emission control systems • Bel-Ray® Hyperion Synthetic Blend CK-4 10W-30 meets API Service Classification CK-4, CJ-4,
CI-4 PLUS, CI-4, CH-4.
• Outstanding oxidation stability
• Bel-Ray® Hyperion Synthetic Blend CK-4, SN 15W-40 meets API Service Classification CK-4, CJ-
• Synthetic Blend formulation
4, CI-4 PLUS, CI-4, CH-4, SN.
• Universal product for mixed fleet operations
• Both viscosities have OEM Approvals for Ford® Specification WSS-M2C171-F1, Cummins® CES
• Excellent low temperature properties helps 20086, Detroit™ DFS 93K222, Mack® EOS-4.5, Volvo® VDS-4.5 and Renault® RLD-4. They also
speed cold starts meet or exceed requirements for Caterpillar® ECF-3, ECF-2, Cummins® CES 20081, Daimler
MB228.31, Detroit™ DFS 93K218, Mack® EO-O Premium Plus, EO-N, MAN M3575, MTU
Category 2.1, Renault® RLD-3, and Volvo® VDS-4,VDS-3 and ACEA E9 and ACEA E7.
Hyperion Synthetic Blend CK-4
Typical Physical Properties
Property Test Method 10W-30 15W-40
API Service CK-4 CK-4/SN
API Gravity @ 60°F ASTM D4052 29.9 31.6
Density@15°C, g/cm3 ASTM D4052 0.876 0.867
Viscosity @ 40°C, cSt ASTM D445 82.9 116
Viscosity @ 100°C, cSt ASTM D445 12.3 15.7
Viscosity Index ASTM D2270 146 143
Flash Point, °C (°F) ASTM D92 238 (460) 238 (460)
Pour Point, °C (°F) ASTM D97 -33 (-27) -33 (-27)
CCS, cP ASTM D5293 5,970 / -25°C 5,250 / -20°C
MRV, cP ASTM D4684 21,900 / -30°C 19,700 / -25°C
HTHS, @150°C, cP ASTM D4683 3.5 4.1
TBN, mg KOH/g ASTM D2896 10 10
Sulfated Ash, wt.% ASTM D874 1.0 1.0
Noack Volatility, wt% ASTM D5800B 12 12
Zinc, wt% ASTM D6481 0.127 0.127
Pounds Per Gallon ASTM D1250 7.22 7.30
Minor variations in typical physical properties may occur from normal manufacturing processes
DISTRIBUTED BY: To the best of our knowledge, the information contained herein is accurate, but is given without
Cal ume t B r a n d e d P ro d u c t s, LLC warranty or guarantee. We assume no liability whatsoever for the accuracy or completeness
2780 Wa t e r f ro n t P k w y. E. Dr., Suit e 2 0 0 of the information contained herein. Final determination of the suitability of any information or
material for the use contemplated, the name of use and whether there is any infringement of
I n di anap o l i s , I N 4 6 2 1 4
patents is the sole responsibility of the user.
Techn i c a l S e r v i c e s : 3 1 7 -3 2 8 -5 6 6 0
w w w. be l r a y. c o m © 2018 Calumet Branded Products, LLC. All Rights Reserved. Rev 11/18
