BU941/BU941P BU941PFI
HIGH VOLTAGE IGNITION COIL DRIVER NPN POWER DARLINGTON
s s
s s
NPN DARLINGTON INTEGRATED ANTIPARALLEL COLLECTOR-EMITTER DIODE VERY RUGGED BIPOLAR TECHNOLOGY HIGH OPERATING JUNCTION TEMPERATURE WIDE RANGE OF PACKAGES
TO-3
1 2
APPLICATIONS s HIGH RUGGEDNESS ELECTRONIC IGNITIONS
3 2
3 2
TO-218
ISOWATT218
INTERNAL SCHEMATIC DIAGRAM
for TO-3 Emitter: pin 2 Base: pin1 Collector: tab
ABSOLUTE MAXIMUM RATINGS
Symbol V CES V CEO V EBO IC I CM IB I BM P tot T stg Tj Parameter BU941 Collector-Emitter Voltage (V BE = 0) Collector-Emitter Voltage (I B = 0) Emitter-Base Voltage (I C = 0) Collector Current Collector Peak Current Base Current Base Peak Current Total Dissipation at T c = 25 o C Storage Temperature Max. Operating Junction Temperature 180 -65 to 200 200 Value BU941P 500 400 5 15 30 1 5 155 -65 to 175 175 65 -65 to 175 175 BUB941PFI V V V A A A A W
o o
Unit
C C 1/8
December 1999
BU941 / BU941P / BUB941PFI
THERMAL DATA
TO-3 R thj-case Thermal Resistance Junction-case Max 0.97 TO-218 0.97 ISOWATT218 2.3
o
C/W
ELECTRICAL CHARACTERISTICS (Tcase = 25 oC unless otherwise specified)
Symbol I CES I CEO I EBO Parameter Collector Cut-off Current (V BE = 0) Collector Cut-off Current (I B = 0) Emitter Cut-off Current (I C = 0) Test Conditions V CE = 500 V V CE = 500 V V CE = 450 V V CE = 450 V V EB = 5 V I C = 100 mA V Clamp = 400 V (See FIG.4) IC = 8 A I C = 10 A I C = 12 A IC = 8 A I C = 10 A I C = 12 A IC = 5 A L = 10 mH 400 T j = 125 o C T j = 125 o C Min. Typ. Max. 100 0.5 100 0.5 20 Unit A mA A mA mA V
V CEO(sus) Collector-Emitter Sustaining Voltage (I B = 0) V CE(sat) Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage DC Current Gain
I B = 100 mA I B = 250 mA I B = 300 mA I B = 100 mA I B = 250 mA I B = 300 mA V CE = 10 V 300
1.6 1.8 2 2.2 2.5 2.7
V V V V V V
V BE(sat)
h FE VF
Diode Forward Voltage I F = 10 A Functional Test (see fig. 1) V CC = 24 V L = 7 mH V CC = 12 V V BE = 0 L = 7 mH I B = 70 mA V Clamp = 400 V V Clamp = 300 V R BE = 47 IC = 7 A 10
2.5
V A
ts tf
INDUCTIVE LOAD Storage Time Fall Time (see fig. 3)
15 0.5
s s
Pulsed: Pulse duration = 300 s, duty cycle 1.5 %
Safe Operating Area
DC Current Gain
2/8
BU941 / BU941P / BUB941PFI
DC Current Gain Collector-emitter Saturation Voltage
Collector-emitter Saturation Voltage
Base-emitter Saturation Voltage
Switching Time Inductive Load (see fig.3)
3/8
BU941 / BU941P / BUB941PFI
FIGURE 1: Functional Test Circuit FIGURE 2: Functional Test Waveforms
FIGURE 3: Switching Time Test Circuit
FIGURE 4: Sustaining Voltage Test Circuit
4/8
BU941 / BU941P / BUB941PFI
TO-3 MECHANICAL DATA
mm MIN. A B C D E G N P R U V 11.00 0.97 1.50 8.32 19.00 10.70 16.50 25.00 4.00 38.50 30.00 TYP. MAX. 13.10 1.15 1.65 8.92 20.00 11.10 17.20 26.00 4.09 39.30 30.30 MIN. 0.433 0.038 0.059 0.327 0.748 0.421 0.649 0.984 0.157 1.515 1.187 inch TYP. MAX. 0.516 0.045 0.065 0.351 0.787 0.437 0.677 1.023 0.161 1.547 1.193
DIM.
P G
D C
P003F
5/8
BU941 / BU941P / BUB941PFI
TO-218 (SOT-93) MECHANICAL DATA
mm MIN. A C D E F G H L2 L3 L5 L6 R 4 3.95 31 12.2 4.1 0.157 0.5 1.1 10.8 14.7 18 4.15 0.155 1.220 0.480 0.161 4.7 1.17 2.5 0.78 1.3 11.1 15.2 16.2 0.019 0.043 0.425 0.578 0.708 0.163 TYP. MAX. 4.9 1.37 MIN. 0.185 0.046 0.098 0.030 0.051 0.437 0.598 0.637 inch TYP. MAX. 0.193 0.054
DIM.
L5 L3 L2
L6
E H
1 2 3
P025A
6/8
BU941 / BU941P / BUB941PFI
ISOWATT218 MECHANICAL DATA
DIM. A C D D1 E F F2 F3 G H L L1 L2 L3 L4 L5 L6 N R DIA mm TYP. inch TYP.
MIN. 5.35 3.30 2.90 1.88 0.75 1.05 1.50 1.90 10.80 15.80 20.80 19.10 22.80 40.50 4.85 20.25 2.1
MAX. 5.65 3.80 3.10 2.08 0.95 1.25 1.70 2.10 11.20 16.20 21.20 19.90 23.60 42.50 5.25 20.75 2.3
MIN. 0.211 0.130 0.114 0.074 0.030 0.041 0.059 0.075 0.425 0.622 0.819 0.752 0.898 1.594 0.191 0.797 0.083
MAX. 0.222 0.150 0.122 0.082 0.037 0.049 0.067 0.083 0.441 0.638 0.835 0.783 0.929 1.673 0.207 0.817 0.091
0.354
4.6 3.5 3.7 0.138
0.181 0.146
- Weight : 4.9 g (typ.) - Maximum Torque (applied to mounting flange) Recommended: 0.8 Nm; Maximum: 1 Nm - The side of the dissipator must be flat within 80 m
P025C/A
7/8
BU941 / BU941P / BUB941PFI
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics 1999 STMicroelectronics Printed in Italy All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com .
8/8
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.
