JAX MAGNA-PLATE FG ISO GEAR OILS
PARTIAL SYNTHETIC, FG-H1 REGISTERED,
HIGH-PERFORMANCE, EXTREME-PRESSURE
FOOD-GRADE GEAR OIL
PRODUCT DESCRIPTION APPLICATIONS
JAX Magna-Plate FG ISO Gear Oils are state-of-the-art, NSF JAX Magna-Plate FG ISO Gear Oils are recommended for
H1-Registered food-grade gear oils specifically designed industrial applications operating under increased loads and
for use in gearbox applications previously considered too shock conditions. Applications include, but are not limited
severe for food-grade lubricants. Formulated using the latest to, enclosed industrial spur, bevel, herringbone, helical
developments in food-grade additive technology, JAX Magna- and worm gears, chain drives, sprockets and most metal-
Plate FG ISO Gear Oils provide maximum R&O, wear, and on-metal systems requiring improved extreme-pressure
extreme-pressure protection. JAX Magna-Plate FG ISO Gear performance. These lubricants are excellent for use in severe
Oils meet the requirements of 21 CFR 178.3570 (lubricants operating conditions and their semi-synthetic properties
with incidental food contact). make them good all-season lubricants.
PRODUCT BENEFITS COMPATIBILITY
• Enhanced Extreme-Pressure Protection—The ability to JAX Magna-Plate FG ISO Gear Oils are compatible with
form a tenacious lubricating film allows these fluids to meet gearbox seals, petroleum gear oils, and most synthetic gear
the requirements for EP gear oils as established by the oils*. For optimum performance, it is recommended that
American Gear Manufacturers Association (AGMA). the system be thoroughly drained and, if warranted, cleaned
prior to installation.
• Superior Additive Performance—These oils are formulated
with advanced additive technologies to provide superior
*JAX Magna-Plate FG ISO Gear Oils, as well as other
performance over competitive food-grade gear oils. They
synthetic or mineral-based oils, are not compatible with
contain proprietary, optimized combinations of antiwear
polyglycol-type gear oils. Thorough flushing prior to
agents, rust inhibitors, and polymeric viscosity improvers
changeover is required.
that provide outstanding long-term wear advantages over
other food-grade gear oils, while their robust antioxidant
chemistry ensures deposit-free operation.
• Water Resistant—Hydrolytic stability and demulsibility
are important features provided by JAX Magna-Plate FG
ISO Gear Oils. Prevention of oil/water emulsions increase
lubricant life and enhances equipment performance by
allowing the gearboxes to be drained of water caused by
the environment, processes or condensation.
GEAR LUBES
JAX MAGNA-PLATE FG ISO GEAR OILS ISO 9001:2008
Certified Quality
Management System
PERFORMANCE FEATURES AND BENEFITS
• NSF H1-Registered
• Kosher and Parve Certified
• Extreme-Pressure Protection for Heavily Loaded Systems
• Recommended for Gear, Vane and Piston Pumps
• Rust, Oxidation and Foam-Inhibited
• Hydrolytically Stable and Readily Separates from Water
TYPICAL 220FG 320FG 460FG
PROPERTIES (00900) (01200) (01400) METHOD
Viscosity @ 40°C, cSt 220.2 312.7 457.0 ASTM D 445
Viscosity @ 100°C, cSt 19.5 25.0 31.8 ASTM D 445
Viscosity Index 100 103 101 ASTM D 2270
ISO Viscosity Grade 220 320 460 ASTM D 2422
Pour Point, °F (°C) 2 (-19) 0 (-18) -7 (-22) ASTM D 97
Flash Point, °F (°C) 464 (240) 496 (258) 496 (258) ASTM D 92
Fire Point, °F (°C) 525 (274) 523 (273) 522 (272) ASTM D 92
Water Separability, oil-water-cuff (min) 40-40-0 (20) 40-40-0 (20) 40-40-0 (20) ASTM D 1401
Foaming Characteristics ASTM D 892
Sequence I 8/0 12/0 10/0
Sequence II 6/0 10/0 12/0
Sequence III 6/0 10/0 14/0
Rust Test ASTM D 665
Method A - Distilled Water Pass Pass Pass
Method B - Synthetic Sea Water Pass Pass Pass
Copper Strip Corrosion 1a 1a 1a ASTM D 130
Four-Ball Wear, mm 0.38 0.38 0.33 ASTM D 4172
FZG Rating, Fail Load Stage 12+ 12+ 12+ DIN 51354
AGMA Classification 5 EP 6 EP 7 EP AGMA 9005-E02
NSF Registration No./Category Code 124640/H1 124639/H1 124638/H1
JAX products undergo continual improvement in formulation and manufacture. The values indicated in this PDS are typical production values at the time of this writing. JAX reserves the
right to alter and update product data and typical values at any time without notice. It is the responsibility of the installer and/or purchaser to determine if these specifications are adequate
and proper for the intended application. MSDS information may be found at www.jax.com or by contacting JAX INC.
CONTAINER SIZE 220FG 320FG 460FG
2000 Pound Tote - 276 00900-276 01200-276 01400-276
400 Pound Drum - 400 00900-400 01200-400 01400-400
120 Pound Keg - 120 00900-120 01200-120 01400-120
35 Pound Pail - 035 00900-035 01200-035 01400-035
4-1 Gallon Case - 004 00900-004 01200-004 01400-004
JAX INC. GEAR LUBES
042015
Menomonee Falls, WI • Sacramento, CA • Nashville, TN GEAR LUBES
800.782.8850 • 262.781.8850 • www.jax.com
