Customer : Pump Performance Datasheet
Reference : American-Marsh Pumps Quotation System 22.3.0
Item number : 001 Size : 16LC-UL_FM 2500GPM 4_60-5
Service : Stages :5
Quantity :1 Based on curve number : 16LC-UL_FM 2500GPM 4_60-5
Quote number : WPHD-2208-BX_v2 Date last saved : 22 Sep 2022 4:43 AM
Operating Conditions Liquid
Flow, rated : 2,500.0 USgpm Liquid type : Water
Differential head / pressure, rated (requested) : 180.0 psi Additional liquid description :
Differential head / pressure, rated (actual) : 181.9 psi Solids diameter, max : 0.00 in
Suction pressure, rated / max : 0.00 / 0.00 psi.g Solids concentration, by volume : 0.00 %
NPSH available, rated : Ample Temperature, max : 68.00 deg F
Site Supply Frequency : 60 Hz Fluid density, rated / max : 1.000 / 1.000 SG
Performance Viscosity, rated : 1.00 cP
Speed criteria : Synchronous Vapor pressure, rated : 0.34 psi.a
Speed, rated : 1750 rpm Material
Impeller diameter, rated : 11.06 in Material selected : Cast iron - Standard
Impeller diameter, maximum : 11.75 in Pressure Data
Impeller diameter, minimum : 10.78 in Maximum working pressure : See the Additional Data page
Efficiency (bowl / pump) : 80.10 / 79.49 % Maximum allowable working pressure : See the Additional Data page
NPSH required / margin required : 19.24 / 0.50 ft Maximum allowable suction pressure : N/A
Ns (total flow) / Nss (imp. eye flow) : 3,645 / 8,169 US Units Hydrostatic test pressure : See the Additional Data page
MCSF :- Driver & Power Data (@Max density)
Head, maximum, rated diameter : 236.8 psi Driver sizing specification : Maximum power
Head rise to shutoff (bowl / pump) : 31.54 / 32.07 % Margin over specification : 0.00 %
Flow, best eff. point (bowl / pump) : 3,211.4 / 3,185.5 Service factor : 1.10 (used)
USgpm Power, hydraulic : 263 hp
Flow ratio, rated / BEP (bowl / pump) : 77.85 / 78.48 % Power (bowl / pump) : 328 / 329 hp
Diameter ratio (rated / max) : 94.15 % Power, maximum, rated diameter : 354 hp
Head ratio (rated dia / max dia) : 82.06 % Minimum recommended motor rating : 350 hp / 261 kW
Cq/Ch/Ce/Cn [ANSI/HI 9.6.7-2010] : 1.00 / 1.00 / 1.00 / 1.00
Selection status : Acceptable
Bowl performance. Adjusted for construction and viscosity.
The duty point represents the head at the bowl.
400
360
320
11.75 in
280
11.06 in 56
240 66
74
Head - psi
80
400.0 hp 83
200 10.78 in 85
85
83
160
80
120
350.0 hp
80 300.0 hp
40
50
NPSHr - ft
NPSHr
25
0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000
Flow - USgpm
Wilo · · ,
Customer : Customer Technical Offer
Reference : American-Marsh Pumps Quotation System 22.3.0
Item number 001 Size / Stages Short set - 16LC-UL_FM 2500GPM
Quote number WPHD-2208-BX_v2 4_60-5 - 5 Stage - Vertical turbine 1750
RPM, 10 Ft. OAL / 5
Pump speed 1750 rpm
Pump
Qty Description
1 Short set - 16LC-UL_FM 2500GPM 4_60-5 - 5 Stage - Vertical turbine 1750 RPM, 10 Ft. OAL
Driver
Driver Options and Accessories
Voltage: All
Bowl
Bowl Assembly
Assemble Pumping Unit Complete: Yes - Less Motor, Mechanical Seal(if provided), and Barrel (if provided)
NSF/ANSI/CAN 61 & 372 Certification Required.: NO
Bowl Model: 16LC-UL_FM 2500GPM 4_60-5
Bowl Lubrication : Open Shaft
Impeller Type: Enclosed
Bowl Shaft Diameter: 2-3/16"
Bowl Construction and Material Options
Bowl Assembly Materials of Construction: Cast Iron ASTM A48 Class 30 - enamel lined
Bowl Bearing Material: Bronze (Alloy C932)
Bowl Wear Ring Material: Bronze (Typically Alloy C932)
Lateral: Standard
Bowl Bolting
Bolting Option: Standard Bolting
Impeller Material: Bronze
Impeller Attachment: Double Keyed - 316 SS (AISI Type 316, UNS S31600)
Impeller Dynamic Balance: No
Bowl Shaft Material: 416 SS (AISI Type 416, UNS S41600)
Bowl Bolting Material Options: 18-8ss Bowl Bolting (ASTM F593, Group 1, Cond CW)
Bowl Coupling Type: Threaded Bowl Shaft Coupling
Bowl Shaft Cplg Material Options: 416 SS (AISI Type 416, UNS S41600)
Bowl Discharge / Suction Options
Bowl Discharge Type: Threaded
Bowl Discharge Size: 12"
Discharge Bearing: Neoprene with Brz Bearing Retainer (Typically Alloy C932)
Bowl Shaft Projection: Other
Bowl Shaft Connection Size: 1-11/16"
Standard Shaft TPI: Yes
Shaft TPI: 10 TPI
Suction Options
Suction Type: Bell
Bell Size: 17.50"
Suction Bearing: Bronze (Alloy C932)
Strainer Type: Basket-Clip / Bolt-On
Strainer Material: 300 SS
Vortex Strainer: No
Wilo · · ,
Customer : Customer Technical Offer
Reference : American-Marsh Pumps Quotation System 22.3.0
Pump
Qty Description
Strainer Length: 12
Bowl Related Weights (lbs):
Approx. Total Bowl Assembly Wt. = 1687
Column
Column Assembly
Column Type: Threaded
Column Diameter: 12"
Column Wall Thickness: 0.330 inch (Sch30)
Column Material: Steel (ASTM A53, Grade B)
Column Sections
Column Section Type: Standard
Column Section Lengths
2.32 ft. Top Section Length
Lineshaft
Lineshaft Type: Open (Product Lubricated)
Lineshaft Diameter: 1-11/16"
Lineshaft Material: 416 SS (AISI Type 416, UNS S41600)
Lineshaft Coupling Type: Threaded
Lineshaft Coupling Material: 416 SS (AISI Type 416, UNS S41600)
Column/Shaft Weight (lbs):
Approx. Column Wt. = 102
Discharge Head
Discharge Head Options
Discharge Head Type: Fabricated Above Ground Discharge
Discharge Head Material: Steel (ASTM A53, Grade B/A36)
Discharge Head Size: SPECIAL / NONE_Check Motor BD or Other Inputs
Discharge Head Flange Size: Head Flange Size (F1) fir GA Drawing =: 12
Head Height: Disch Head Ht (A) for GA Drawing = : 0
Disch Centerline Up Dimension: Disch Flange CL Height Up (B) for GA Drawing = : 0
Disch Flange Face Out Dimension: Flange Face Out From Head CL (C) for GA Drawing = : 0
Disch Head Bottom Plate Thickness: Discharge Head Bottom Plate Thickness (J) for GA Dwg = : 0
Disch Head Bottom Plate Hole Size: Disch Head Bottom Plate Bolt Hole Size (H2) for GA Drawing = : 0
Disch Head Bottom Plate Hole Qty: Disc Head Number of Holes in Base (H1) for GA Drawing: 0
Disch Head Bottom Plate Hole Location (Sq or BC): Disch Head Base Hole Location (H3) for GA Drawing =: 0
Disch Head Bottom Plate Size: Disc Head Bottom Plate OD (H5) for GA Drawing = : 0
Discharge Head Coupling Guard: Steel
Provide Head Shaft: Yes
Headshaft Diameter: 1-11/16"
Headshaft Material: 17-4PH SS (H900)
Headshaft Coupling Type: Threaded
Headshaft Coupling Material: 416 SS (AISI Type 416, UNS S41600)
Shaft Sealing Type: High pressure packed box (Standard Construction)
Stuffing Box Material: Cast Iron (ASTM A48 Class 30)
Stuffing Box Bearing Material: Bronze (ASTM B505, Alloy C932)
Steel Foundation Plate (ASTM A36): Yes
Discharge Flange Type: 150# RF Discharge
Head Related Weights (lbs):
Wilo · · ,
Customer : Customer Technical Offer
Reference : American-Marsh Pumps Quotation System 22.3.0
Pump
Qty Description
Approximate Head Weight = 0
Fire Pump Accessories
Standard/Required Fire Pump Accessories
Included Accessories: Standard/Required Accessories and General Fire Pump adder:
Discharge Pressure Gage: Provided
Automatic Air Relief / Vacuum Valve: Provided
Throttling Device: Provided
Optional Fire Pump Accessories
Flow Meter: No
Pilot Operated Main Relief Valve: No
Waste Cone: No
Hose Manifold: No
Hose Valve w/Cap and Chains: No
1/2" Ball Drip Valve: No
Special Coatings
Bowl Assembly Coating
Coating Type Bowl: Factory Standard
Coating Name Bowl: Pro Tech - Acrystar 3000 series
Coating Thickness Bowl: 2.0 Mils DFT
Number of Coats Bowl: One Coat
Coating Color Bowl: Fire Pump Red
Items to be Coated - Bowl
No Special OD Coating of Bowl (Paint OD Fire Pump Red)
Column Assembly Coating
Coating Type Column: Factory Standard
Coating Name Column: Pro Tech - Acrystar 3000 series
Coating Thickness Column: 2.0 Mils DFT
Number of Coats Column: One Coat
Coating Color Column: AMP Red
Items to be Coated - Column
No Special OD Coating of Column (Special Column Material)
Head Assembly Coating
Coating Type Head: Factory Standard
Coating Name Head: Pro Tech - Acrystar 3000 series
Coating Thickness Head: 2.0 Mils DFT
Number of Coats Head: One Coat
Coating Color Head: Fire Pump Red
Items to be Coated - Head
No Special OD Coating of Head (Paint OD Fire Pump Red)
Testing (Pump)
Bowl Performance Test
Performance Test Non-Witness
Performance Test Options
Test with Customer Motor - NO
HI Test Acceptance Grades and Corresponding Tolerance Band and Curve Approval
Customer Approval Requirements:: Customer approval of test data not included
Test Acceptance Grade: None Specified
Wilo · · ,
Customer : Customer Technical Offer
Reference : American-Marsh Pumps Quotation System 22.3.0
Pump
Qty Description
Pump Test Acceptance Grade: Fire Pump (NFPA20)
Hydrostatic Testing
Bowl Hydrostatic Test - Non-Witness Test
Discharge Head Hydrostatic Test - Non-Witness Test
Other Optional Features or Requirements
Spare Parts
Spare Parts: No Spare Parts Provided
Engineering Options
Mil Certs: Material Certifications Required - NO
Non Destructive Testing: Non-Destructive Testing Required - NO
Standard O&M Manuals (1 copy)
Special Engineering Drawings - NO
Seismic Anchorage Calculations: NO
Natural Frequency Analysis (Fab Heads Only) Via FEA: NO
Special Services / Warranty Options
Expedite Fees: Expedite Order Delivery - NO
FieldService: Field Service/Start-up Services Required - NO
Warranty: Standard Manufacturers Warranty
Special Tools / Special Options
Special Tools: Special Assembly Tools Required - No
Other Specials: Other Special Options - NO
Freight / Shipping Charges: No Freight and/or Shipping Charges Included
Crating Charges: No Crating or Skidding
Driver
Qty Description
1 Driver
Primary Pump Driver Type: Electric Motor
Driver Options and Accessories
Driver Shaft Type: VHS
Driver Size: 350HP
Phase: Three
Enclosure: WPI
Starting Method: Across-the-Line
Steady Bushing: No
Inverter Duty Motor Required: No
Driver: VHS_Special
Manufacturer: US-Fire Pump Service
Driver Manufacturer Option: Driver Manufacturer Subject to Change Based on Availability Unless Required by Customer
Driver BX: 1-11/16"
Driver Base Diameter: 10" or 12" BD
Driver CD: Provided Driver CD =
Control Panels
Fire Pump Panels
Dual Utility Transfer Switch: No
Electric Controller Starting Method: Across the Line / Full Voltage
Wilo · · ,
Customer : Customer Technical Offer
Reference : American-Marsh Pumps Quotation System 22.3.0
Driver
Qty Description
Panel HP Rating: 350HP
Controller Manufacturer: Metron Controller
Enclosure: NEMA 2
Mounting Method: Floor
Short Circuit Withstand Rating: Standard Withstand Rating
Motor/Gear Weight (lbs):
Approx. Fire Pump Controller Wt. = -1
Wilo · · ,
American-Marsh Pumps Quotation System 22.3.0
GENERAL ARRANGEMENT DRAWINGS
Vertical Turbine Pump
DISCHARGE HEAD
500 SERIES VT
Open Lineshaft Product Lubricated
GENERAL DATA
FLOW 2,500.0 USgpm HEAD 180.0 psi
LIQUID Water SG 1.000 SG
LIQUID TEMP 68.00 deg F VISCOSITY 1.00 cP
PUMP DATA
BOWL MODEL 16LC-UL_FM STAGES 5
BOWL SFT DIA 2.19 in LINESHAFT DIA 1.69 in
IMPELLER CONN. TYPE Double Keyed - 316 SS (AISI
COLUMN
Type 316,
SIZE
UNS S31600)12.00 in
COLUMN CONN. TYPE Threaded COL WALL / COL SCH 0.33 in
FOUNDATION PLATE TOTAL RATED THRUST 8,747.5 lb
MECHANICAL SEAL DATA
MFGR John Crane TYPE 1345 Packing
SIZE 0.38 in API CODE -
PUMP MATERIAL DATA
BOWL Cast Iron IMPELLER Brz
BOWL WR Bronze IMP WR -
BOWL SHAFT 416 SS LINESHAFT 416 SS
STRAINER 300 SS COL PIPE Steel
DISCHARGE HEAD Steel COL CPLG Steel
MOTOR DATA
MFR. US_FP FRAME -
STRAINER DETAIL
HP 350 RPM 1750
PHASE Three VOLTS All
CYCLES 60 ROTATION -
TYPE VHS ENCLOSURE WPI
WEIGHTS
EST. PUMP WT. - EST. MOTOR WT. 0.00 lb
CERTIFICATION CONTENT
CUSTOMER
SERVICE -
ITEM NUMBER 001
P.O. NUMBER -
QUOTE NO. 0
All Dimensions Are In inches ± 0.38 in
Not For Construction Unless Certified By Engineering DATE -
Drawings Represent General Construction CERTIFIED FOR -
A B C D(T) E F G(T) H(T) I J K L M N AG CERTIFIED BY -
0.00 0.00 0.00 13.94 15.50 17.50 25.37 82.63 108 0 -1.00 32.00 --- --- 0.00
WARNING
H1 H2 H3 H4 H5 F1 F2 F3 F4 P1 P2 P3 P4 S1 S2 DO NOT OPERATE THIS MACHINE WITH OUT PROTECTIVE GUARD IN PLACE. ANY OPERATION
0 0 0 12.00 -4.00 12.00 150 RF 0.00 --- 1.13 -5.00 20.00 -2.00 15.50 12.00 OF THIS MACHINE WITHOUTPROTECTIVE GUARD CAN RESULT IN SEVERE BODILY INJURY
Vertical Turbine Fire Pump - 16LC-UL_FM - 5 Stage
