Scribd
Upload
99 views2 pages

Truck Crane Steel Wire Rope Specifications

This document provides information on steel wire rope that is semi-rotation resistant and intended for use on mobile cranes, truck cranes, and jib cranes. It should not be used on construction tower cranes. This type of rope has a construction that causes deterioration from the inside out over time, which can lead to sudden failures if not inspected. The document includes specifications for rope diameter, steel area, minimum breaking forces, and weight for various part codes.

Uploaded by

zilugsibuch
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
99 views2 pages

Truck Crane Steel Wire Rope Specifications

This document provides information on steel wire rope that is semi-rotation resistant and intended for use on mobile cranes, truck cranes, and jib cranes. It should not be used on construction tower cranes. This type of rope has a construction that causes deterioration from the inside out over time, which can lead to sudden failures if not inspected. The document includes specifications for rope diameter, steel area, minimum breaking forces, and weight for various part codes.

Uploaded by

zilugsibuch
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Steel Wire Rope 19x7 (Semi-rotation resistant)

Product information

Main- and auxiliary hoist line on mobile- and truck cranes. Often used as a single point line. Large lifting heights will require a tag line to
prevent excessive spinning of the load. Smaller sizes (< 3/8”) are sometimes used on overhead cranes.
NOT recommended for construction tower cranes.

Rope characteristic: Using the rope to it’s maximum fatigue life will cause the rope to deteriorate from the inside out. Sudden rope failures
may be the result. For this reason we do not recommend this construction for tower cranes. There have been fatal and catastrophic
accidents involving this rope construction because of undetected inner rope fatigue.
ISO 4309 Rope Category No: All Diameters RCN.23-1.

Rope construction: 19x7 (Semi-rotation resistant rope)


Marking: According to standard
Standard: EN 12385-4

RCN: 23-1
Truck crane Jib crane

Part Code Rope diameter Steel area Min. breaking force Min. breaking force Weight
mm mm² kN kN kg/100m
1770 N/mm² 1960 N/mm²

01.B30133030E0 3 3.9 5.23 - 3.61

01.G30133040E0 4 6.93 9.3 10.3 6.42

01.B30133050E0 5 10.8 14.5 16.1 10

01.G30133060E0 6 15.6 20.9 23.1 14.4


01.B30133070E0 7 21.2 28.4 32 19.6

01.B30133080E0 8 27.7 37 41 25.7

01.G30133090E0 9 35.1 47 52 32.5

01.G30133100E0 10 43.3 58 64 40.1

01.B30133110E0 11 52.4 70 78 49

01.G30133120E0 12 62.4 84 93 58

01.B30133130E0 13 73.2 98 109 68

01.B30133140E0 14 84.9 114 126 79

01.B30133150E0 15 97.4 131 145 90

01.G30133160E0 16 111 149 165 103

01.B30133180E0 18 140 188 208 130

01.B30133200E0 20 173 232 257 160

01.G30133220E0 22 210 281 311 194

01.B30133240E0 24 249 334 370 231

01.B30133260E0 26 293 392 435 271

01.G30133280E0 28 339 455 504 314

01.G30133300E0 30 390 523 579 361

01.B30133320E0 32 443 594 658 411

01.G30133340E0 34 501 671 743 464

01.B30133360E0 36 561 752 833 520

01.B30133380E0 38 625 838 928 579

01.B30133400E0 40 693 929 1029 642

You might also like