COPPER

PANCAKE COIL
M al l e abl e and D ura b l e

JIS H 3300:2009
Seamless Plain Copper Tube

AS/NZS 1571:1995
Seamless Copper Tubes for Air
Conditioning & Refrigeration
Copper Pancake Coil

Introduction
COPPER TUBE is an essential part in Heating, Ventilating and Air Conditioning (HVAC) industry. Copper tube for the plumbing, heating
and air-conditioning industries is available in drawn and annealed tempers (referred to as “hard” and “soft”), as well as in a wide range of
diameters and wall thicknesses.

Acson copper pancake coils are readily available, serving every design application. The joints are simple, reliable and economical to make--
these are the reasons people choose our products.

Today, copper developments continue as the industry pioneers broader

uses for copper tube in engineered plumbing systems for new and retrofitted
residential, industrial and commercial installations.

With the wide choice of sizing and diameter, Acson copper pancake coils
undergone the process of cleaning, dehydrating and capping The copper
pancake coils are We are forever endeavours to serve you better.

Features
Wide Range Ease of Installation
An extensive range of copper coils is offered Copper tubes can be easily joined using
specifically to cater for the special requirements compression fittings, capillary fittings with
of refrigeration gas lines. either soft solders or silver brazing alloys.

Reliability Durable and Long Lasting

Acson copper pancake coils are factory cleaned Whether from cold, heat or pressure, copper
and supplied sealed to maintain the cleanness reliably withstands external influences, does
of the bore under normal conditions of handling not age and shows no wear in the form of
and storage. brittleness.  They set the industry standard for
corrosion resistance and long, reliable service life.

Meeting the Standards

Acson copper pancake coils are certified
by SIRIM as compliance with Australia/New
Zealand Standard AS/NZS 1571-1995 and
Japanese Standard JIS H 3300:2009.

Product Nomenclature

SIRIM yyyy-mm-dd JIS H 3300 1220T-O

Certification Manufacture Date Japanese Standard O temper: fully softened condition (annealed)

SIRIM Acson 20170124 15.88x0.61x15m JIS H 3300 C 1220T-O

Acson 15.88 x 0.61 C

Brand Name Nominal Diameter (mm) x Wall Thickness (mm) Type C Copper
 Malleable and Durable

Specifications
Seamless Copper Tubes for Air Conditioning and Refrigeration
The copper tubes are supplied in the form of soft temper annealed coils.
Outer
- Each coil is packaged orDiameter WallinThickness
shrink wrapped Length
plastic bag with ends Coil per Carton
capped. Weight per Coil Safety Working Pressure up to 50°C
Material Code
inch mm inch mm m pcs kg/pcs kPa (50°C) kPa (75°C) Psi (50°C) Psi (75°C)

COP-2/0.61S 0.024 0.61 1.47 8274 6867 1200 996

1/4" 6.35 16
COP-2/0.71S 0.028 0.71 1.68 9170 7611 1330 1104

COP-3/0.61S 0.024 0.61 2.28 5516 4578 800 664

3/8" 9.52 10
COP-3/0.71S 0.028 0.71 2.63 5895 4893 855 710

COP-4/0.61S 0.024 0.61 3.10 3447 2861 500 415

1/2" 12.7 15 8
COP-4/0.71S 0.028 0.71 3.58 4344 3606 630 523

COP-5/0.61S 0.024 0.61 3.91 3103 2575 450 374

5/8" 15.88 6
COP-5/0.71S 0.028 0.71 4.52 3447 2861 500 415

COP-6/0.61S 0.024 0.61 4.73 2413 2003 350 291

3/4" 19.05 5
COP-6/0.71S 0.028 0.71 5.47 2758 2289 400 332

Remark:
1. Safe working pressures have been calculated based on tube minimum thickness and the annealed temper design tensile stress values specified in Japanese Standard JIS H 3300:2009.
2. Operating pressures for specific refrigerants should be obtained from refrigerant suppliers.
3. All the information contained in this brochure are served as a guideline for reference purpose. Acson Malaysia does not guarantee that the data is accurate without any errors.
4. Acson Malaysia reserves the right to amend the specifications at any time without prior notice. 

Manufacturing Standards
The manufacturing standards of copper alloy are shown in the following table according to different international standards.

Standard Country Product Type Copper Alloy Code Symbol Temper Grade

O Soft Annealed

C1201 OL Light Annealed

JIS H 3300 Japan
C1220 1/2 H Half Hard
Annealed Coil/
H Hard Drawn
Straight Pipe
ANN Annealed
Australia/
AS/NZS 1571 C12200 BQ Bendable
New Zealand
HD Hard Drawn

Standard Export Length

The copper pancake coils are manufactured based on phosphorus deoxidised copper as shown in the following table.

Product Type Temper Length

Pancake coils Annealed 15 m

Chemical Composition
The copper pancake coils are manufactured based on phosphorus deoxidised copper as shown in the following table.

Standard Country Copper Alloy Code Chemical Composition

C1201
JIS H 3300 Japan
C1220 Cu 99.90%
Australia/ P 0.015-0.040%
AS/NZS 1571 C12200
New Zealand
 Inspired Cooling Companion

Mechanical Properties
Standard JIS H3300:2009

Material Grade C12200

Chemical Copper (Cu) + Silver (Ag) % ≥ 99.90

Composition Phosphorus (P) % 0.015 - 0.040

Temper Designation O

Grain Size mm 0.025 - 0.060

Tensile Strength MPa ≥ 205

Elongation % (mm) ≥ 40 (≥ 50)

Mechanical
Rockwell Hardness (15T) ≤ 60
Properties
Expansion Test % 40

ɸ 4 - 10 : 0.9 mm
Non-destructive
ɸ 10 - 20 : 1.0 mm
(All: Size of drill hole)
ɸ 20 - 30 : 1.1 mm

Product Certification
Malaysian Certified
Acson copper pancake coils are certified by SIRIM as compliance with Australia/New Zealand Standard AS/NZS 1571-1995 and Japanese
Standard JIS H 3300:2009.

ACSON MALAYSIA SALES & SERVICE SDN.BHD. (129688-D)

a member of DAIKIN group
Lot 4, Lorong 19/1A, Seksyen 19, 46300 Petaling Jaya,
Selangor Darul Ehsan, MALAYSIA.
Tel : +603 7964 8200 Sales Fax : +603 7956 9909
Service Fax : +603 7956 9907 Acson Careline : 1300 22 3344

Penang : +604-5377 176 Pahang : +609-5178 696

Perak : +605-3129 828 Kelantan : +609-740 5233
Melaka : +606-2926 196 Sarawak : +6082-344 128
Johor : +607-3551 599 Sabah : +6088-420 205

CAT-ACP-1701