Chemical - Level 1 - 11 - TDS 233 SM
Chemical - Level 1 - 11 - TDS 233 SM
SPECIFICATIONS
APPEARANCE Colorless transparent liquid
DESCRIPTION
LOCTITE BONDACE 233SM is cleaner for PU mid soles, synthetic leather, PEBAX and TPU. LOCTITE
BONDACE 233SM is suitable for materials which are difficult to be cleaned out with LOCTITE BONDACE
233BF.
DIRECTIONS
Soak a brush or a cotton cloth with LOCTITE BONDACE 233SM and clean the material. Then dry
Drying condition could be adjusted by substrates. Some substrates can be applied adhesive right after
cleaning without drying
General Condition: at room temperature or 50~55℃×2~3minutes.
.
CAUTION
1. Keep away from flammable materials and store in a well-ventilated place.
2. Keep tightly capped when not in use.
3. Wear a suitable personal protective equipment (PPE) to avoid skin or eye contact.
4. The drying efficiency may vary with machine design, specification, setting and effectiveness. It is strongly
recommended that the NIR drying condition be optimized for specific NIR chamber and shoe
model/substrates. Henkel technical service staff is available to assist in the process optimization
5. See Safety Data Sheet (SDS) before using.
The information given and the recommendations made herein are based on our research and are believed to be
accurate but no guarantee of their accuracy is made. In every case we urge and recommend that purchasers, before
using any product in full scale production, make their own tests to determine to their own satisfaction whether the
product is of acceptable quality and is suitable for their particular purposes under their own operating conditions