SAROJ MAKE ROCKWELL HARDNESS TESTING MACHINE
RAS RAB - 250 RAB - TWIN
FEATURES :
ROCKWELL, ROCKWELL BRINELL COMBINED, ROCKWELL/ROCKWELL SUPERFICIAL
COMBINED SYSTEM HARDNESS TESTERS.
SAROJ Hardness Testers Model RAS, RAB-1, RAB-250, TWIN are manually operated. All these models
are suitable for testing hardness of metals and alloys of all kinds hard or soft, whether flat, round, or
irregular shape. These testers are simple in design and easy to operate, yet sensitive & accurate.
Various models from the wide range are suitable for schools, laboratories, tool-rooms, inspection, heat
treatment departments, factories etc. These testers strictly conform to IS : 3804 -1988, BS : 891 parts
1 & 2, ASTM : E 18 for Rockwell test, IS : 2281 -1983, BS : 240, ASTM : E 10 for Brinell test and IS
5073 -1988 ASTM : E 18 for Rockwell Superficial Test.
MODEL RAS : MODEL RAB-1 MODEL TWIN
Automatic load selection with Automatic load selection & Automatic load selection with
automatic automatic zero automatic
zero setting dial gauge. setting dial gauge. Facility for zero setting dial gauge.
Brinell tests
Manual operation. with 187.5 kgf. load with 2.5 mm Manual operation.
Ball
indentor, additional load 250 kgf. Diamond holder is guided in a
with 5mm ball cage,
Ball indentor for testing hardness which enables testing of small
of non-ferrous metals. pins having dia.
Less than 6 mm (up to 3mm
dia.)
MODEL RASM (MOTORISED) : MODEL RAB 250
Similar to 'RAS' but motorised Similar to 'RAB-1' but of bigger
model. capacity.
Diamond holder is guided in a ball
cage,
Semiautomatic operation for which enables testing of small
production testing. pins having dia less than 6 mm (
up to 3 mm dia.)
Drive motor single phase 230 V
50 Cycles.
STANDARD ACCESSORIES :
MODEL RAS /RASM RAB-1 / RAB-250 TWIN
Testing table 50mm dia 1 pc. 1 pc. 1 pc.
Testing Table 38mm dia with 'V groove 1 pc. 1 pc. 1 pc.
for round jobs 6 to 45mm dia.
Diamond Indentor 120° 1 pc. 1 pc. 1pc.
Stell ball Indentor 1/16" 1 pc. 1 pc. 1 pc.
Test Block Rockwell 'C 1 pc. 1 pc. 1 pc.
Test Block Rockwell 'B' 1 pc. 1 pc. 1 pc.
Test Block Rockwell Superficial 'N' NIL NIL 1 pc.
Allen Spanners 5 pcs 5 pcs 5 pcs
Clamping Device 1 pc. 1 pc. 1 pc.
Dash Pot Oil 1 Bottle 1 Bottle 1 Bottle
Rubber bellow for elevating screw 1 pc. 1 pc. 1pc.
protection
Instruction Manual 1 Book 1 Book 1 Book
Brinell Microscope NIL 1 pc. NIL
Stell Ball Indentor 2.5mm NIL 1 pc. NIL
Test Block HB 2.5/187.5 NIL 1 pc. NIL
Stell Ball Indentor 5mm ' NIL 1 'pc. -. NIL
TECHNICAL DATA:
MODEL UNIT RAS RASM RAB-1 RAB-250 TWIN
Loads kgf. 60, 100 150 60, 100 150 60, 100 60, 100 15, 30,45 (Rockwell
150, 187.5 150, 187. Superficial)
250 250 60,100,150
(Rockwell)
Initial Load kgf. 10 10 10 10 3 (Rockwell
Superficial) 10
(Rockwell)
Max. Test Height mm. 230 230 230 330 330
Depth of Throat mm. 133 133 133 150 150
Max. depth ot mm. 240 240 240 355 355
elevating screw
below base
Size of base mm 170x430 170x430 170x430 210x474 210x474
(approx.)
Machine Height mm 655 655 655 850 850
(approx.)
Nett Weight kg. 65 65 65 100 100
(approx.)
LOADS & INDENTORS FOR 'SAROJ' HARDNESS TESTERS
FOR ROCKWELL & BRINELL TESTS.
Total load in kgf. 60 100 150 187.5 250
(Initial load 10
kgf.)
Indentor Diamond 120° Ball 1/16" O Diamond 120° Ball 2.5 mm 0 Ball 5mm 0
Test Scales Rockwell A Rockwell B Rockwell C Bhnell,F/D Bhnell, F/D
2=30 2=10
Suitable for Tests on case Annealed, Annealed, Annealedsteel Copper, Copper
hardened stell Ferrous & non hardened & & cast irons alloys &AI.
ferrous metals tempered deep alloys
case hardened
steel
