0% found this document useful (0 votes)
196 views1 page

80 PLUS Power Supply Efficiency Report

This document summarizes the results of an efficiency test on a 600W power supply. It achieved an average efficiency of 93.38% and a typical efficiency of 94.21% at 50% load, meeting the requirements for 80 PLUS certification. Key measurements included input/output power and voltage/current values at 10%, 20%, 50%, and 100% load. The power supply maintained over 90% efficiency across most of its operating range.

Uploaded by

Fahrul Rozy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
196 views1 page

80 PLUS Power Supply Efficiency Report

This document summarizes the results of an efficiency test on a 600W power supply. It achieved an average efficiency of 93.38% and a typical efficiency of 94.21% at 50% load, meeting the requirements for 80 PLUS certification. Key measurements included input/output power and voltage/current values at 10%, 20%, 50%, and 100% load. The power supply maintained over 90% efficiency across most of its operating range.

Uploaded by

Fahrul Rozy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

80 PLUS Verification and Testing Report

TYPICAL EFFICIENCY (50% Load): 94.21%


AVERAGE EFFICIENCY : 93.38%
80 PLUS COMPLIANT: YES

Ecos ID # 4437 Input Current and Voltage Waveforms


Manufacturer GD Segotep Electroinc Technology Co., Ltd. 200 5
Model Number GP600T(SG-600T) 150 4
Serial Number N/A 3
100
2
Year 2015

Voltage (V)

Current (A)
50 1
Type EPS12V 0 0
Test Date 9/2/15 -50 0 0.003 0.006 0.009 0.012 0.015 -1
-2
-100
-3
-150 -4
Rated Specifications Value Units -200 -5
Input Voltage 100-240 Volts
Input Current 12-6 Amps Time (s)
Input Frequency 47-63 Hz Voltage Current
Rated Output Power 500 Watts
Note: All measurements were taken with input voltage at 115 V nominal at 60 Hz. Input AC Current Waveform (ITHD = 16.98%, 50% Load)

IRMS A Input DC Terminal Voltage (V)/ DC Load Current (A) Output Efficiency
PF ITHD (%) Load (%)
A Watts 12V (cumulative of 12V1, 12V2, etc.) -12V 3.3V 5V 5Vsb Watts %
0.52 0.93 21.35% 10% 55.44 12.23/3.37 12.29/0.02 3.37/1.06 5.07/0.99 5.07/0.2 51.00 91.98%
0.98 0.97 18.96% 20% 108.58 12.22/6.74 12.18/0.05 3.36/2.11 5.07/1.97 5.06/0.41 102.12 94.05%
2.41 0.98 16.98% 50% 270.50 12.22/16.82 12.2/0.12 3.35/5.28 5.06/4.91 5.05/1.02 254.83 94.21%
4.87 0.99 8.90% 100% 554.50 12.23/33.65 12.53/0.25 3.33/10.53 5.05/9.81 5.03/2.05 509.45 91.88%

Input and Output Power Efficiency of the Power Supply


600 100%
90%
500
80%
70%
400 Input Watts
Efficiency (%)
Power (Watts)

60%
300 50%
40%
200
30%
Output Watts 20%
100
10% Efficiency %

0 0%
20% 50% 100% 0% 25% 50% 75% 100% 125%
Loading (% of Rated Output Power) Loading (% of Rated Output Power)

These tests were conducted by a third party independent testing firm on behalf of the
80 PLUS Program. 80 PLUS is a certification program to promote highly-efficient
power supplies (greater than 80% efficiency in the active mode) in technology
applications. http://www.80plus.org/

You might also like