VIAVI Solutions

Data Sheet

VIAVI
SmartClass™ Fiber OLP-88/-88P TruePON
Full-featured G-PON and XGS-PON tester with
fiber connector inspection

The VIAVI Solutions® OLP-88 TruePON tester is the ideal tool for field technicians
dealing with G-PON and XGS-PON network service activation and for support teams
charged with resolving service complaints and identifying the sources of issues. TruePON
uses G-PON data analysis for real-time measurement of fiber optic cable insertion loss,
downstream and upstream power levels, ODN class, and for instantaneous identification of
OLT-ID ONU/ONT-ID as well as rogue ONUs causing service issues.

Key Benefits
y Ensures first-time-right G-PON and
XGS-PON network acceptance
y Reduces workflow complexity during
service activation
y Speeds on-site troubleshooting and
facilitates service recovery
y Drives optimal user workflows and behaviors
to eliminate issues caused by poor practices
The tester also inspects and certifies fiber end faces, Key Features
critical steps that must be performed before making any y Wavelength-selective, through-mode power
fiber optic connection. With TruePON, technicians get meter for B-PON, E-PON, G-PON, XGS-PON
ultimate flexibility and performance from a powerful, and 10G-EPON networks
easy-to-use solution that instantly turns any user into y Available in 1310/1490 nm, 1310/1490/1550
nm and 1270/1310/1490/1577 nm versions
a Fiber Smart technician.
Through-Mode - Automatic ODN class detection and
1490/1577 nm 1490/1577 nm
power-level pass/fail analysis
1270/1310 nm 1270/1310 nm
OLT
Power Test - In-service loss measurements
1490/1577 nm

- OLT identification; ONU/ONT serial

ONT number extraction; rogue and alien ONU
detection
1 Customer site (ONT/ONU)
OLT
3 ONT y Low-insertion loss (<1.5 dB)
2 Splitter cabinet 2
1
y Automated pass/fail fiber inspection analysis
3 Central office site (OLT)
ONU with built-in patch-cord microscope or
optional P5000i probe
y Easy generation of professional
Connect and perform measurements anywhere in your PON network certification reports
Transforms G-PON Service Activation Certifies Power Levels Automatically
and Troubleshooting When verifying power levels at a customer ONT, TruePON
certifies that the G-PON and XGS-PON services meet
The comprehensive TruePON tester uses a new technology
specifications by performing a fully automated power
that enables precise G-PON data analysis for faster, error-
level certification. It performs downstream and upstream
free service activations and advanced troubleshooting.
PON power level measurements (1270/1310/1490/1577 nm)
Its sophisticated data analysis:
and automatically sets pass/fail thresholds in systems with
y Extracts G-PON-specific data carried in the PON-ID PON-ID*.
standardized by ITU-T G.984.3 Amendment 3.
y Displays OLT transmitted power levels for in-service loss
testing between an OLT and ONU/ONT*
y Identifies the ONU/ONT by serial number and rogue or
alien ONUs/ONTs in any G-PON system
ONT
1490/1550 nm

Saves Time 1310 nm

TruePON minimizes or eliminates the time needed to

configure jobs at the office prior to a work session. It
lets you start testing right away, extracting all relevant
information (thresholds, ONT serial number, OLT-ID)
directly from data carried in the G-PON signals*.

1 Connect and test

2 Save data Eliminates Human Errors While Ensuring

Reliable Results
3 Generate reports
Service-activation is often performed by subcontractors
who are dealing with hundreds of customer turn ups.
To make sure test reports are error-free and authentic,
Improves Field Technician Efficiency TruePON analyzes G-PON data to extract and display
Absent or wrong labeling of fiber cables in splitter cabinets ONU/ONT serial numbers. It allocates ONU/ONT serial
can lead to incorrect customer/ONT connections. TruePON numbers according to the customer service contract,
ensures the ONT is connected to the right G-PON OLT and automatically links service-activation results to the
by identifying the OLT-ID carried by the PON-ID at any ONT/customer—ensuring the authenticity of test results.
network location*.
ONT ONU
OLT – A6 B8 D9 AB 2E 3C 4F 1x8 1x8 1x8
1x8 ALCL-F8 A8 0C A1
OLT – F8 A7 B3 CC 0F 7A 1B

OLT – F8 A7 B3 CC 0F 7A 1B

1x8

* Requires activation of PON-ID functionality in G-PON systems according to ITU-T

G.984.3 Amd3.

2 SmartClass Fiber OLP-88/-88P TruePON

Qualifies In-Service Fiber Plant Facilitates Fast Service Recovery
During the construction phase, the fiber plant is qualified; Identifying and localizing a rogue ONU that degrades
end-to-end loss testing ensures that the fiber link complies or disables customer service can be difficult. OLP-88
with the loss budget. However, several years later, when instantaneously detects the presence of a rogue or alien
new customers subscribe to the FTTH services, performance ONU/ONT in G-PON networks, facilitating fast service
may not be intact. TruePON performs real-time, in-service, recovery by isolating the faulty ONU/ONT for quick
end-to-end loss measurements in G-PON networks*. It is replacement.
the fastest way to qualify fiber links in an already-running
network. ONT

ONT

ONT
ONT

???
OLT
ONT Drop
terminal

Rogue/
ONU alien ONT

Drives Best Practices

More than 75% of fiber network troubleshooting can be
attributed to connector contamination. OLP-88, optionally
equipped with a built-in patch-cord microscope, helps
ensure that fiber technicians follow best practices. It
integrates automatic pass/fail certification for fiber
connectors for optimal user workflows and behaviors
that eliminate poor practices.

Stands Up to Harsh Field Conditions

Compact and lightweight (<1 kg), OLP-88 is a ruggedized
tool for field technicians working indoors and outdoors.
It runs for up to 12 hours on battery power, and is easy to
operate using a simple and user-friendly color touch-screen
display. OLP-88 stores up to 10,000 test results
and includes an APC test interface with a switchable
adapter system.

* Requires activation of PON-ID functionality in G-PON systems according to ITU-T

G.984.3 Amd3.
3 SmartClass Fiber OLP-88/-88P TruePON
The SmartClass Fiber Product Family
 Integration — combines inspection and testing
 Automation — pass/fail certification
 Ease of use — intuitive touch-screen user interface

SmartClass Fiber tester with SmartClass Fiber tester with SmartClass Fiber tester with P5000i
P5000i analysis microscope patch-cord microscope and patch-cord microscopes

OLP-37 PON/RFOG Power Meter OLP-87 PON/ XG-PON Power Meter OLP-88 TruePON Tester
y Power level measurements y Power level measurements of y Power level measurements of
of 1490/1550/1610 nm 1490/1550/1577 nm downstream 1490/1550 nm downstream
downstream signals and 1270/1310 nm upstream signals and 1310 nm upstream signals
(model 2327/36), or 1490/1577
y Fiber connector inspection
OLP-37X G/XGS-PON Power Meter downstream and 1270/1310
y Power level measurements of OLP-87 NG-PON2 Power Meter upstream (model 2327/37)
1490/1577nm downstream signals
y Simultaneous selective y G-PON ONT/OLT/ONU
power level measurements of identification
1596.34/1597.18/1598.04/
y Detection of alien/rogue ONU/
1598.89 nm downstream and
ONTs in G-PON systems
1595-1603 nm upstream signals
y In-service loss testing in G-PON
y Fiber connector inspection
systems

y Fiber connector inspection

4 SmartClass Fiber OLP-88/-88P TruePON
Specifications

Version 2327/26 Version 2327/36, 2328/36 Version 2327/37

Power Meter
(1310/1490) (1310/1490/1550) (1270/1310/1490/1577)
Functionality
B-PON (ITU-T G983.x) n n n
G-PON (ITU-T G984.x) n n n
E-PON (IEEE 802.3av) n n n
XGS PON (ITU-T G.9807.1) n (option)
10G-EPON (IEEE 802.3av) n (option)
RF video signals 1550nm n
FTTx Mode
Upstream 1270 nm, burst mode
Power measurement range -40 to +13 dBm1,2
Max permitted input level +17 dBm
Spectral passband 1250 to 1330 nm
Upstream 1310 nm, burst mode
Power measurement range -40 to +13 dBm1 -40 to +13 dBm1 -40 to +13 dBm1
Max permitted input level +17 dBm +17 dBm +17 dBm
Spectral passband 1290 to 1330 nm 1290 to 1330 nm 1250 to 1330 nm
Downstream 1490 nm
Power measurement range -45 to +7 dBm -45 to +7 dBm -45 to +7 dBm
Max permitted input level +9 dBm +9 dBm +9 dBm
Spectral passband 1450 to 1495 nm 1450 to 1495 nm 1450 to 1495 nm
G-PON Data Analysis at 1490 nm -30 to +7 dBm -30 to +7 dBm -30 to +7 dBm
Downstream 1577 nm 2

Power measurement range -45 to +13 dBm

Max permitted input level +15 dBm
Spectral passband 1528 to 1610 nm
RF video signals 1550 nm 3

Power measurement range -45 to +26 dBm

Max permitted input level +27 dBm
Spectral passband 1540 to 1560 nm
1. Burst mode: -35 to +13 dBm
2. For OLP-88 2327/37 version only, requires XGS-PON option 2327/94.04
3. For OLP-88 2327/36, and 2328/36 versions only

5 SmartClass Fiber OLP-88/-88P TruePON

Specifications continued

Instrument
Display resolution 0.01 dBm/0.001 μW
Display units/information dB, dBm, with pass/fail
ORL >60 dB
Threshold sets ITU-T G.984.3 or user-specific thresholds
Pass-through insertion loss 4
<1.5 dB
Power uncertainty 4
±0.5 dB
Calibrated wavelengths 1270/1310/1490/1550/1577 nm
Feature Availability
Two-port through mode for upstream and Downstream OLT signal (1490/1577 nm)
downstream power level measurements5 Upstream ONT signal (1270/1310 nm burst mode)
Downstream RF video signal (1550 nm)
G-PON Data Analysis
Identification of G-PON ONU/ONT serial Included for 2327/36, 2327/37 and 2328/36, optional for 2327/26
numbers6
ODN class detection and auto threshold setting7 GPON-ID software option
In-service insertion loss test with auto pass/fail GPON-ID software option
analysis7
OLT identification7 GPON-ID software option
Detection of alien/rogue ONUs 6
Alien/rogue-ONU detection software option
Fiber Inspection
With external probe P5000i option
With integrated patch cord microscope OLP-88P version

4. At 23°C ±3°C, at 1310/1490/1550/1577 nm, at −7 dBm

5. For B-PON (ITU-T G.983.x), E-PON (IEEE 802.3), G-PON (ITU-T G984.x), XGS-PON
(ITU-T G.9807.1), 10G-EPON (IEEE 802.3av) signals
6. For G-PON signals according ITU-T G.984 (without PON-ID)
7. Optional for G-PON signals according ITU-T G.984.3 Amd3

6 SmartClass Fiber OLP-88/-88P TruePON

Specifications continued Ordering Information
General All OLP-88 and -88P TruePON testers include:

Display High-contrast 3.5 in color y APC connector and SC optical adapter (x2)
LCD with touch-screen y SC2 soft shoulder case
functionality
y Quick-start manual and safety instructions
Fiber inspection capability With patch-cord
microscope or external y RBP2 rechargeable LiON battery pack (3.7 V, 20 Wh)
P5000i microscope and PS4 power supply (12 V, 2 A)
(optional)
Description Part Number
Data memory Up to 10,000 PON results
OLP-88 TruePON tester, 1310/1490 nm 2327/26
Data readout Via client USB interface
OLP-88 TruePON tester, 2327/36
Electrical interfaces 2 x USB host, 1x micro 1310/1490/1550 nm
USB, Ethernet
OLP-88 TruePON tester, 2327/37
Wireless interface WiFi client (optional) 1270/1310/1490/1577nm
Power supply 12 V, 2 A with OLP-88P TruePON tester with patch- 2328/36
interchangeable wall plug cord microscope, 1310/1490/1550 nm
for EU, UK, US, and AU
Software Options
Battery Li-ion pack 3.7 V, 20 Wh
OLP-88 Alien ONT detection 2327/94.01
Battery life (Li-ion battery >12 hr
pack) OLP-88 GPON-ID test 2327/94.02
Optical connectors APC with SC switchable OLP-88 XGS-PON option 2327/94.04
adapters (FC, ST and LC (for 2327/37 only)
adapters optional) Hardware Options
Recommended 3 years WiFi option including USB 2327/90.21
recalibration interval WiFi adapter
Dimensions OLP-88 208 x 112 x 64 mm; 750 g Accessories
(H x W x (8.2 x 4.4 x 2.5 in; 1.6 lbs) P5000i digital analysis microscope FBP-SD101
D)/Weight OLP-88P 208 x 153 x 64; 850 g with 4 tips (FBPT-SC, FBPT-LC, FBPT-
(8.2 x 6.0 x 2.5 in; 1.85 lbs) U25M, FBPT-U12M)
Operating temperature –5˚ to +45˚C ST switchable optical adapter for 2155/00.32
range (23˚ to 113˚F) OLP-88
Storage temperature –25˚ to +55˚C FC switchable optical adapter for 2155/00.05
range (–13˚ to 131˚F) OLP-88
LC switchable optical adapter for 2155/00.07
OLP-88
Kit, RBP2 rechargeable battery (Li ion) FITP-RCG1
and FBPP-PS4 power supply (12 V)
Power supply for SmartClass Fiber FBPP-PS4
(12 V)
Rechargeable battery for SmartClass FITP-RBP2
Fiber (Li ion)
UC4 hands-free carrier for SmartClass FITP-UC4
Fiber
UC4P hands-free carrier for FITP-UC4P
SmartClass Fiber with PCM
SCASE2 soft shoulder case for FBPP-SCASE2
SmartClass Fiber tools

7 SmartClass Fiber OLP-88/-88P TruePON

VIAVI Care Support Plans
Increase your productivity for up to 5 years with optional VIAVI Care Support Plans:
y Maximize your time with on-demand training, priority technical application support and rapid service.
y Maintain your equipment for peak performance at a low, predictable cost.
Contact your local representative for more information on VIAVI Care Support Plan options or visit:
viavisolutions.com/viavicareplan

Features *5-year plans only

5 Year Battery
Technical Factory Priority Self-paced Factory Accessory Express
Plan Objective and Bag
Assistance Repair Service Training Calibration Coverage Loaner
Coverage

Technician
Efficiency
Premium   
BronzeCare

Maintenance &
Measurement Premium    * 
Accuracy
SilverCare

High
Availability
Premium    *   
MaxCare

Contact Us +1 844 GO VIAVI © 2020 VIAVI Solutions Inc.

(+1 844 468 4284) Product specifications and descriptions in this
document are subject to change without notice.
To reach the VIAVI office nearest you, olp-88-truepon-ds-fop-nse-ae
VIAVI Solutions visit viavisolutions.com/contact 30179638 903 1020

viavisolutions.com