Scribd
Upload
435 views1 page

RM70 GO - Technical Data

The RM70 GO! is an impact crusher mounted on a tracked chassis that can process material up to 600mm at a throughput of up to 120 tonnes per hour. It is operated by a single person using radio control and features a vibrating feed unit, pre-screening, a folding discharge conveyor, a 103kW diesel engine, and optional dust suppression and other systems. The entire unit weighs 19,500kg and is transported on its crawler gear.

Uploaded by

eaglego00
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
435 views1 page

RM70 GO - Technical Data

The RM70 GO! is an impact crusher mounted on a tracked chassis that can process material up to 600mm at a throughput of up to 120 tonnes per hour. It is operated by a single person using radio control and features a vibrating feed unit, pre-screening, a folding discharge conveyor, a 103kW diesel engine, and optional dust suppression and other systems. The entire unit weighs 19,500kg and is transported on its crawler gear.

Uploaded by

eaglego00
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RM70 GO!

- impact crusher with crawler gear


Throughput Up to 120 t/h, depending on material

Feed size edge length max. 600 mm

Inlet opening 760 x 600 mm

Crusher unit HMH impact crusher with 2 or 4 hammers

Operation One operator using radio control for crushing and manoeuvring operations

Feed unit symmetric 2 m3 vibro-channel with two 3 kW vibrator motors


Loading height 2.660 mm
Effective feed length and width: 2.500 x 1.800 mm
Feed Control System (2nd generation automation)
for automatic conveying in line with crusher load
Wear-resistant Hardox 400 cladding

Pre-screening Efficient pre-screening using bar mesh screen


Screen area 1.000 x 610 mm
Output on main discharge conveyor via fully integrated bypass chute

Discharge belt crushed Folding conveyor 800 mm wide, folds into transport position hydraulically
material Discharge height 2.720 mm

Drive unit Deutz Diesel engine, 4 cylinder


103 kW at 2.000 rpm
TIER 3a/ COM IIIa approved
3-phase synchronous generator 40 kVA 400 V
230 V and 400 V outlets for external drives up to 15 kW

Release System Removes blockages inside crusher

Magnetic separator Extra strong magnet with left/right function,belt width 800 mm

Transport system crawler gear

Weight 19.500 kg

Options Dust supression system


Dust supression using water spray inside crusher and at outlet
Filling pump
Crusher hammer changing system
Cable remote control
Central lubrication system
Subfloor

Specifications subject to change in line with technical developments.

www.rubblemaster.com

RUBBLE MASTER HMH GmbH


Im Südpark 196 - AT 4030 Linz - Austria
T +43 . 732 . 73 71 17- 42
F +43 . 732 . 73 71 17- 9
[email protected]

You might also like