Scribd
Upload
50 views5 pages

Lathe Default MM

The document is a setup sheet report for step turning and chamfering on a lathe. It provides general information about the project such as the customer name, programmer, drawing details and date. It also lists the chuck and stock dimensions. The operation list includes two operations - face turning and rough turning. It specifies the tools, speeds, feeds and cycle times for each operation.

Uploaded by

Maqsood War
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views5 pages

Lathe Default MM

The document is a setup sheet report for step turning and chamfering on a lathe. It provides general information about the project such as the customer name, programmer, drawing details and date. It also lists the chuck and stock dimensions. The operation list includes two operations - face turning and rough turning. It specifies the tools, speeds, feeds and cycle times for each operation.

Uploaded by

Maqsood War
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Setup Sheet Report

Lathe Default MM
GENERAL INFORMATION
PROJECT NAME: Step Turning champhering
CUSTOMER NAME: CIIIT Baramulla
PROGRAMMER: Mahima jan
DRAWING: Step Turning REVISION:
DATE: Thursday, March 9, 2023
TIME: 12:40 PM

C:\USERS\ADMINISTRATOR\DOCUMENTS\MY MASTERCAM 2021\MASTERCAM\PARTS\T.MCAM

COMMENTS
CHUCK / STOCK

CHUCK (LEFT): YES CHUCK (RIGHT): NO


GRIP LENGTH: 20.0 GRIP LENGTH: NA
HEIGHT: 50.0 HEIGHT: NA
WIDTH: 37.0 WIDTH: NA
THICKNESS: 15.0 THICKNESS: NA
REFERENCE: -126.0, 28.75 REFERENCE: NA
HSTEP: HSTEP:
VSTEP: VSTEP:

STOCK (LEFT): YES STOCK (RIGHT): NO


OUTSIDE DIAMETER: 57.5 OUTSIDE DIAMETER: NA
INSIDE DIAMETER: 0.0 INSIDE DIAMETER: NA
LENGTH: 148.0 LENGTH: NA
Z REFERENCE: 2.0 Z REFERENCE: NA
C:\USERS\ADMINISTRATOR\DOCUMENTS\MY MASTERCAM
2021\MASTERCAM\LATHE\NCI\T.NCI
CYCLE TIME: 0 HOURS, 2 MINUTES, 16 SECONDS

OPERATION LIST
OPERATION INFO 1 - Lathe Face

CYCLE TIME: 0 HOURS, 1 MINUTES, 6 SECONDS


COMMENT:

SPINDLE SPEED: 1200 RPM

FAST FEED: 0.12 mm/rev


SLOW FEED: 0.1 mm/rev

STOCK TO LEAVE (X): NA


STOCK TO LEAVE (Z): 0.0

RETRACT ACTIVE: NO
ENTRY ACTIVE: NO

COOLANT: Flood

TOOL INFO T0202: General turning tool - OD ROUGH RIGHT - 80 DEG.

TOP TURRET: YES

ACTIVE SPINDLE: Left


SPINDLE DIRECTION: CCW
SPINDLE SPEED: 1200 RPM
FAST FEED: 0.12 mm/rev
SLOW FEED: 0.1 mm/rev

OFFSET: 2
OFFSET (BACK): NA

INSERT UP: NO

COOLANT: Flood

TIME: 00:01:06

HOLDER: MWLNR 2525M 08


LENGTH: 150.0
WIDTH: 32.0
ORIENTATION: Vertical ANGLE: 0.0
HAND: Right

INSERT: CNMG 12 04 08
SHAPE: C (80 deg. diamond)
RADIUS: 0.8
MATERIAL: Carbide
OPERATION INFO 2 - Lathe Rough

CYCLE TIME: 0 HOURS, 1 MINUTES, 10 SECONDS


COMMENT:

SPINDLE SPEED: 1200 RPM

FAST FEED: 0.12 mm/rev


SLOW FEED: 0.1 mm/rev

STOCK TO LEAVE (X): 0.2


STOCK TO LEAVE (Z): 0.2

RETRACT ACTIVE: NO
ENTRY ACTIVE: NO

COOLANT: Flood

TOOL INFO T0202: General turning tool - OD ROUGH RIGHT - 80 DEG.

TOP TURRET: YES

ACTIVE SPINDLE: Left


SPINDLE DIRECTION: CCW
SPINDLE SPEED: 1200 RPM
FAST FEED: 0.12 mm/rev
SLOW FEED: 0.1 mm/rev

OFFSET: 2
OFFSET (BACK): NA

INSERT UP: NO

COOLANT: Flood

TIME: 00:01:10

HOLDER: MWLNR 2525M 08


LENGTH: 150.0
WIDTH: 32.0
ORIENTATION: Vertical ANGLE: 0.0
HAND: Right

INSERT: CNMG 12 04 08
SHAPE: C (80 deg. diamond)
RADIUS: 0.8
MATERIAL: Carbide
TOOL LIST Sorted: NO
TOOL INFO T0202: General turning tool - OD ROUGH RIGHT - 80 DEG.

TOP TURRET: YES

ACTIVE SPINDLE: Left


SPINDLE DIRECTION: CCW
SPINDLE SPEED: 90 RPM
FAST FEED: 0.2 mm/rev
SLOW FEED: 0.1 mm/rev

OFFSET: 2
OFFSET (BACK): NA

INSERT UP: NO

COOLANT: Flood

TIME: 00:02:16

HOLDER: MWLNR 2525M 08


LENGTH: 150.0
WIDTH: 32.0
ORIENTATION: Vertical ANGLE: 0.0
HAND: Right

INSERT: CNMG 12 04 08
SHAPE: C (80 deg. diamond)
RADIUS: 0.8
MATERIAL: Carbide

USED BY OPERATION: #1 1 - Lathe Face


USED BY OPERATION: #2 2 - Lathe Rough

WORK OFFSETS
OFFSET INFO

NUMBER: 0 PLANE: Lathe upper left ORIGIN: X0.0, Z0.0

USED BY OPERATION: #1 1 - Lathe Face


USED BY OPERATION: #2 2 - Lathe Rough

You might also like