Scribd
Upload
90 views3 pages

E Product Information: M-Series 5kV Electric Motor Analyzer

The EMAX M-Series 5kV Electric Motor Analyzer is a portable battery-powered device that monitors power quality, power circuits, stators, rotors, and air gaps of low, medium, and high voltage motors. It performs simultaneous six-channel acquisition and provides analysis of torque, efficiency, impedance, phase angle, power signatures, and current spectra. The device is equipped with motor management software and collects various motor data for troubleshooting and trending de-energized electric motors.

Uploaded by

Mineglis coronel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
90 views3 pages

E Product Information: M-Series 5kV Electric Motor Analyzer

The EMAX M-Series 5kV Electric Motor Analyzer is a portable battery-powered device that monitors power quality, power circuits, stators, rotors, and air gaps of low, medium, and high voltage motors. It performs simultaneous six-channel acquisition and provides analysis of torque, efficiency, impedance, phase angle, power signatures, and current spectra. The device is equipped with motor management software and collects various motor data for troubleshooting and trending de-energized electric motors.

Uploaded by

Mineglis coronel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

EMAX Product Information

M-Series 5kV Electric Motor Analyzer

 Portable and battery powered


 Monitors Power quality, Power Circuit,
Stator, Rotor, and Air Gap
 Low, medium, and high voltage motors
 Six channel simultaneous acquisition
 Torque and efficiency analysis
 Impedance and phase angle
measurement
 Power and current signature tests

Description
The EMAX On-line motor test equipment Data Includes:
offers the most versatile approach to  Current Spectral Analysis
troubleshooting and trending de-energized  High Frequency Eccentricity Analysis
electric motors on the market today.  Three Phase In-Rush/Start-Up
 Phase-to-Phase Voltage RMS
It is equipped with a fully functional laptop  Line-to-Neutral Voltage RMS
computer and loaded with MCEGold, the  Voltage Imbalance
gold standard in motor management  Crest Factor
software.  Total Harmonic Distortion (THD)
 % Full Load Amps
With MCEGold the entire test history of  Average Current RMS
your electric motor along with the latest in  Phase Current RMS
acceptance criteria from IEEE and NEMA is  Phase Impedance
at your fingertips. Immediately following  Impedance Imbalance
the test, Red or Yellow color-coded alarms  Power (KW, KVA, KVAR)
identify any test data that is outside the  Power Factor
acceptance criteria.  Efficiency
 Energy Cost Analysis
The case is made of ultra high impact ABS  Output Power
material for ruggedness. It is easy to carry  AC/DC Motor Testing
and no AC power is required, making  Torque
tough to reach motors or starters easier to
test.
Page 1 of 2 (Rev. 0)
Model M4020
Model M4050

Voltage Measurement: Test Lead Set:


AC Voltage 0-1000 Vrms 10 ft. (3.05 m.) fused voltage leads for 3 phases and
Direct line ±1% (10 to 100% of range) ground.
Secondary line ±1% + PT error (10 to 100% of 10 ft. (3.05 m) current probe cable connects 3 probes
range) via BNC connector
MTAP Leads 0-35 VAC ±1% +PT error (10 to Voltage probe accessory kit
100% of range) Three 6 ft. (1.83 m.) current probes for three phases

DC Voltage 0-1000 Vpeak (Qualitative only) Tester Battery:


Li Ion – 6.6Ah
Current Measurement AC/DC:
±0.5% of input (± accuracy of the probes) Computer Voltage Input:
AC 100-240 V, 50/60 Hz
Standard Current Probe Set:
PdMA 2128.14 Environmental
±1%(of reading) ±0.1mV from 1 to 12A Operating temperature:
@100mV/A 32°F to 95°F (0°C to 35°C)
±1%(of reading) ±2mV from 10 to 80A
@10mV/A Storage temperature:
±2.5%(of reading) ±2mV from 100 to 150A -40°F to 149°F (-40°C to 65°C)
@10mV/A
Operating Humidity:
Power Measurement: 10% - 90% (non-condensing)
THD/HVF/ Spectrum – 50th harmonic

Current Spectrum Analysis: 5% - 95% (non-condensing)


8,000 lines resolution
Accuracies to within the specified +/- % accuracy or +/- two
In-Rush/Start-Up Test: resolution steps whichever is greater.
Sampling rate 3,600/second
Test duration 1 minute

Rotor Evaluation Test:


Sampling rate 960/second
Fmax 0-480 Hz
Resolution 8,000 lines

Eccentricity and Power Test:


Sampling rate 12,288/second
Fmax 0-6,000 Hz
Resolution 8,000 lines

Dimension:
18.5x14.5x6 in.
(46.99x36.83x15.24 cm)

Weight:
26 lbs (11.79 kg)

Lightweight Portable Electric Motor Analyzer


Page 2 of 2 (Rev.0)

You might also like